Flux Jumps and H-T Diagram of Instability for MgB2

We present a study of magneto-thermal instabilities in polycrystalline MgB₂ superconductor, by magnetic hysteresis loop measurements and by investigations of magnetic flux dynamics with a miniature Hall probe. Temperature and magnetic field ranges where the flux jumps may be observed have been determined. On the basis of measurements of the magnetic flux dynamics, an average magnetic diffusivity describing the process of the flux jump is estimated. This parameter is compared with the thermal and magnetic diffusivities calculated on the basis of available data for thermal conductivity, heat capacity and resistivity. It is shown that the estimated value of the field of the first flux jump is influenced significantly by the field dependence of specific heat. In order to explain the observed phenomenon, the temperature reached by the sample during the flux jump at different magnetic fields is calculated.     

Magnetotransport Properties and Mechanism of the A-Site Ordering in the Nd–Ba Optimal-Doped Manganites

The crystal structure and magnetotransport properties of the Nd_0.70Ba_0.30-MnO_3.00−δ manganites have been investigated. The stoichiometric A-site ionic disordered Nd_0.70Ba_0.30MnO_3.00 sample is orthorhombic (SG=Imma) ferromagnet below T _C ≈151 K. It has metal-insulator transition at T _MI ≈140 K and peak of magnetoresistance ∼50% in field of 9 kOe. The anion-deficient partly A-site ionic ordered Nd_0.70Ba_0.30MnO_2.60 sample is ferrimagnet with T _N ≈130 K and has nanometric ∼440 nm grains. The oxygen annealed stoichiometric partly A-site ordered Nd_0.70Ba_0.30MnO_3.00 sample consists of two perovskite phases: (i) A-site ionic completely ordered tetragonal (SG=P4/mmm) NdBaMn_2.00O_6.00 with a Curie point of ∼310 K and (ii) superstoichiometric orthorhombic (SG=Pnma) NdMnO_3.00+γ with a Curie point of ∼120 K. The magnetoresistance of this sample at the room temperature is about 7% in a field of 9 kOe. Considerable changes of the magnetic properties are interpreted as due to the ordering of Nd³⁺ and Ba²⁺ cations as well as the formation of nanometric grains.      

Morse set classification and hierarchical refinement using Conley index

Morse decomposition provides a numerically stable topological representation of vector fields that is crucial for their rigorous interpretation. However, Morse decomposition is not unique, and its granularity directly impacts its computational cost. In this paper, we propose an automatic refinement scheme to construct the Morse Connection Graph (MCG) of a given vector field in a hierarchical fashion. Our framework allows a Morse set to be refined through a local update of the flow combinatorialization graph, as well as the connection regions between Morse sets. The computation is fast because the most expensive computation is concentrated on a small portion of the domain. Furthermore, the present work allows the generation of a topologically consistent hierarchy of MCGs, which cannot be obtained using a global method. The classification of the extracted Morse sets is a crucial step for the construction of the MCG, for which the Poincare′ index is inadequate. We make use of an upper bound for the Conley index, provided by the Betti numbers of an index pair for a translation along the flow, to classify the Morse sets. This upper bound is sufficiently accurate for Morse set classification and provides supportive information for the automatic refinement process. An improved visualization technique for MCG is developed to incorporate the Conley indices. Finally, we apply the proposed techniques to a number of synthetic and realworld simulation data to demonstrate their utility.     

Magnetic Ordering of Dy3+ Ions in RbDy(WO4)2 Single Crystal

The specific heat C(T) of the monoclinic RbDy(WO ₄ ) ₂ crystal has been studied at very low temperatures 0.2T1.9 K and in magnetic fields 0H0.38 T. The Neel temperature was shown to be equal to T_N = 0.818 ± 0.005 K. The experimental value of the effective exchange parameter was obtained to be equal to J/k = – 0.798 K. The C T) dependence below Neel temperature 0.5T_N0.99T_N ) is well described by 2D Ising model, whereas in the temperature region close above T_N (1.01 T_N2T_N) it can be described by neither 2D, nor 3D Ising model. The experimental and theoretical H-T_N diagrams for field H a are in a reasonable agreement for simple quadratic lattice.     

Energy Absorption by a Single Abrikosov’s Vortex in NbTi and YBaCuO Superconductors

The calculations of the absorption energy and the Q-factor of vibration of a vortex line under the effect of an external uniform harmonic force have been presented. The line tension of the vortex line and its effective mass, Magnus force, pinning force, and viscosity force were included in the equation of the dynamics. Two peaks of absorption in accordance with two modes of the oscillation spectrum were observed. The first peak of absorption is a result of flux pinning, which coincides with the De Gennes–Matricon solution in some limits. The second (high-frequency) peak is a result of a novel mode related to the effective mass of a vortex line. Temperature dependencies of absorption peaks were calculated for the NbTi and YBaCuO superconductors for orientations H∥c and H⊥c. The resonant frequency of the resonance peaks of absorption decreases with an increase in temperature. Some other peculiarities of the oscillating dynamics of the vortex line were discussed.     

Ultrastructural and developmental toxicity of potato and tomato leaf extracts to beet armyworm,Spodoptera exigua (lepidoptera: noctuidae)

Beet Armyworm, Spodoptera exigua is a herbivorous moth and a serious pest of many economically important plants, which are used as food sources. Because of rigorous standards of food quality, usage of synthetic insecticides in crop protection, against pests, is limited. Solanaceae plant extracts may be a relatively cheap source of efficient natural insecticides that can limit usage of synthetic substances. Their biological activity is not fully known. In particular, ultrastructural studies, using transmission electron microscopy, are not usual. In the present article we describe the effects of sublethal concentrations of tomato and potato leaf extracts against S. exigua. Acute lethal effects were not observed. Both extracts exerted similar effects within midgut and fat body cells. Midgut cells were not significantly altered while fat body cells showed prominent swelling of nuclear envelope and endoplasmic reticulum, vacuolization of mitochondria and fusion of fat droplets. These changes were much more intensive within groups exposed to potato than tomato extracts at highest concentration at least. Light microscopy was used to observe and document developmental alterations of S. exigua exposed to potato and tomato leaf extracts. Potato leaf extracts significantly decreased hatching success and caused morphological malformations of imagoes. Among them, malformations of wings were the most prominent. Interestingly, these effects were not observed within populations exposed to tomato extracts at highest concentration at least.     

Novel visible photoinitiators systems for free-radical/cationic hybrid photopolymerization

Free radical/cationic hybrid photopolymerization of acrylates and epoxides was induced using an initiator system comprised of the dye derivative 5,12-dihydroquinoxalino[2,3-b]quinoxaline or 5,12-dihydroquinoxalino[2,3-b]pyridopyrazine as the sensitizers and hexafluoroantimonate triarylsulfonium salt as the initiators. The curing experiments were carried out in the presence of air and the consumption of each monomer upon VIS-radiation was monitored in situ by real-time infrared spectroscopy. Hardness (H), elastic modulus (E) and the H/E ratio of the coatings obtained by visible-initiated acrylate/epoxide hybrid photopolymerization were determined using nanoindentation. DSC measurements show that the initiator system presented here may produce an interpenetrating polymer network. The pencil hardness of the obtained coatings indicates that the dye/hexafluoroantimonate triarylsulfonium salts systems studied here may have practical applications as visible-light hybrid initiators.     

Domain-wall superconductivity in superconductor-ferromagnet hybrids

Superconductivity and magnetism are two antagonistic cooperative phenomena, and the intriguing problem of their coexistence has been studied for several decades. Recently, artificial hybrid superconductor-ferromagnet systems have been commonly used as model systems to reveal the interplay between competing superconducting and magnetic order parameters, and to verify the existence of new physical phenomena, including the predicted domain-wall superconductivity (DWS). Here we report the experimental observation of DWS in superconductor-ferromagnet hybrids using a niobium film on a BaFe(12)O(19) single crystal. We found that the critical temperature T(c) of the superconductivity nucleation in niobium increases with increasing field until it reaches the saturation field of BaFe(12)O(19). In accordance with the field-shift of the maximum value of T(c), pronounced hysteresis effects have been found in resistive transitions. We argue that the compensation of the applied field by the stray fields of the magnetic domains as well as the change in the domain structure is responsible for the appearance of the DWS and the coexistence of superconductivity and magnetism in the superconductor-ferromagnet hybrids.     

An error analysis for the finite element method applied to convection diffusion problems

This paper analyzes the finite element method applied to a convection diffusion model problem. Linear elements are used for the trial space. The error is measured in a norm closely related to the L_p norm. When the test space is composed of linear elements with parabolic upwinding, the method is shown to be optimal when the input data is piecewise smooth—a condition which is usually observed in practice. Without these smoothness assumptions, the method is shown to be non-optimal, even if the class of test spaces is extended to include any elements which have a shape independent of the mesh size.