Hierarchical polymer nanocomposite coating material for 316L SS implants: Surface and electrochemical aspects of PPy/f-CNTs coatings

Biocompatible nanocomposite coatings can be synthesized to offer improved surface properties for biomaterials and biomedical implants. Nanocomposite coatings containing polypyrrole (PPy) matrix reinforced with functionalized multi-wall carbon nanotubes (f-CNTs) were deposited on 316L SS substrates using electrochemical route. FT-IR, XRD, SEM, and TEM were employed to characterize the nanocomposite microstructure. High resolution imaging showed relatively uniform dispersion of the CNTs in the nanocomposite with a typical tubular structure. Micro-indentation tests revealed improvement in the hardness of the PPy/CNTs coatings. Measurement of the contact angle indicated enhanced surface wettability of the nanocomposite coatings. The corrosion behavior of 316L SS samples coated with PPy/CNTs was studied in SBF medium. The corrosion potential and the breakdown potential of coated 316L SS substrates shifted to more noble values as compared to uncoated 316L SS samples. The results suggest that incorporating CNTs as reinforcements in PPy coatings can provide enhanced properties in terms of surface hardness, biocompatibility, and corrosion resistance.     

Solvothermal‐assisted green synthesis of hybrid Chi‐Fe3 O4 nanocomposites: a potential antibacterial and antibiofilm material

In this present study, a hybrid Chi‐Fe₃ O₄ was prepared, characterised and evaluated for its antibacterial and antibiofilm potential against Staphylococcus aureus and Staphylococcus marcescens bacterial pathogens. Intense peak around 260 nm in the ultraviolet–visible spectrum specify the formation of magnetite nanoparticles. Spherical‐shaped particles with less agglomeration and particle size distribution of 3.78–46.40 nm were observed using transmission electron microscopy analysis and strong interaction of chitosan with the surface of magnetite nanoparticles was studied using field emission scanning microscopy (FESEM). X‐ray diffraction analysis exhibited the polycrystalline and spinel structure configuration of the nanocomposite. Presence of Fe and O, C and Cl elements were confirmed using energy dispersive X‐ray microanalysis. Fourier transform infrared spectroscopic analysis showed the reduction and formation of Chi‐Fe₃ O₄ nanocomposite. The antibacterial activity by deformation of the bacterial cell walls on treatment with Chi‐Fe₃ O₄ nanocomposite and its interaction was visualised using FESEM and the antibiofilm activity was determined using antibiofilm assay. In conclusion, this present study shows the green synthesis of Chi‐Fe₃ O₄ nanocomposite and evaluation of its antibacterial and antibiofilm potential, proving its significance in medical and biological applicationsInspec keywords: visible spectra, particle size, magnetic particles, nanocomposites, nanoparticles, X‐ray diffraction, nanofabrication, transmission electron microscopy, X‐ray chemical analysis, nanomagnetics, microorganisms, antibacterial activity, iron compounds, ultraviolet spectra, biomedical materials, field emission scanning electron microscopy, Fourier transform infrared spectra, filled polymers, crystal growth from solution, polymer structureOther keywords: potential antibacterial material, antibiofilm potential, magnetite nanoparticles, solvothermal‐assisted green synthesis, hybrid Chi‐Fe₃ O₄ nanocomposites, staphylococcus aureus, staphylococcus marcescens, bacterial pathogens, ultraviolet–visible spectrum, spherical‐shaped particles, particle size, transmission electron microscopy, FESEM, field emission scanning electron microscopy, X‐ray diffraction, spinel structure, polycrystalline structure, energy dispersive X‐ray microanalysis, Fourier transform infrared spectroscopic analysis, deformation, bacterial cell walls, Fe₃ O₄      

Structural and photoluminescence properties of swift heavy ion irradiated CdS thin films

This paper reports the results on structural and photoluminescence (PL) properties of thermally evaporated CdS thin films subjected to 100 MeV Ag⁺⁷ ion irradiation. The structure of the pristine and irradiated films was found to be polycrystalline with preferred orientation along the (0 0 2) diffraction line of the CdS hexagonal phase. The films retain their crystallinity upon irradiation indicating structural stability against irradiation. Formation of Cd clusters due to loss in sulfur atoms during irradiation was identified. However, the structural parameters such as grain size, strain and dislocation density have shown significant changes in their values as a result of irradiation. An increase in the grain size from 19.6 nm for pristine to a maximum of 63.1 nm for the irradiated films was estimated. The irradiation caused relaxation in the c-lattice parameter and shrinkage in the full-width at half-maximum (FWHM). The PL spectrum was dominated by red emission band due to loss of sulfur atoms.     

Solar hydrogen generation from organic substance using earth abundant CuS–NiO heterojunction semiconductor photocatalyst

This work explores the critical role of NiO co-catalyst assembled on the surface of a CuS primary photocatalyst which effectively improves interface properties and enhances solar-to-hydrogen production by prolonging lifetime of photo-excitons generated at the CuS surface. The nanoscale CuS/NiO heterojunction is formulated using hydrothermal and wet impregnation methods. The resultant CuS/NiO composite shows optical absorbance between 380 and 780 nm region. The type-II energetic structure formed at CuS/NiO heterojunction facilitates rapid charge separation and as a result, the CuS/NiO composite exhibits 13 folds higher photocatalytic water splitting performance than CuO and NiO. The champion CuO/NiO photocatalyst is first identified by screening the catalysts using a preliminary water splitting test reaction under natural Sunlight irradiation. After the optimization of the catalyst, it was further explored for enhanced photocatalytic hydrogen production using different organic substances dispersed in water (alcohols, amine and organic acids). The champion CuS/NiO catalyst (CPN-2) exhibited the photocatalytic hydrogen production rate of 52.3 mmol h^?1.g^?1_cat in the presence of lactic acid-based aqueous electrolyte and, it is superior than hydrogen production rate obtained in the presence of other organic substances (triethanolamine, glycerol, ethylene glycol, methanol) tested under identical experimental conditions. These results indicate that the energetic structure of CuS/NiO photocatalyst is favorable for photocatalytic oxidation or reforming of lactic acid. The oxidation of lactic acid contributes both protons and electrons for enhanced hydrogen generation as well as protects CuS from photocorrosion. The modification of surface property and energetic structure of CuS photocatalyst by the NiO co-catalyst improves photogenerated charge carrier separation and in turn enhances the solar-to-hydrogen generation efficiency. The recyclability tests showed the potential of CPN-2 photocatalyst for prolonged photocatalytic hydrogen production while continuous supply of lactic acid feedstock is available.     

Highly Ordered N‐Doped Carbon Dots Photosensitizer on Metal–Organic Framework‐Decorated ZnO Nanotubes for Improved Photoelectrochemical Water Splitting

In spite of having several advantages such as low cost, high chemical stability, and environmentally safe and benign synthetic as well as operational procedures, the full potential of carbon dots (CDs) is yet to be explored as photosensitizers due to the challenges associated with the fabrication of well‐arrayed CDs with many other photocatalytic heterostructures. In the present study, a unique combination of metal–organic framework (MOF)‐decorated zinc oxide (ZnO) 1D nanostructures as host and CDs as guest species are explored on account of their potential application in photoelectrochemical (PEC) water splitting performance. The synthetic strategy to incorporate well‐defined nitrogen‐doped carbon dots (N‐CDs) arrays onto a zeolitic imidazolate framework‐8 (ZIF‐8) anchored on ZnO 1D nanostructures allows a facile unification of different components which subsequently plays a decisive role in improving the material's PEC water splitting performance. Simple extension of such strategies is expected to offer significant advantages for the preparation of CD‐based heterostructures for photo(electro)catalytics and other related applications.     

Synthesis of Cd1 − xMnxS nanoclusters by surfactant-assisted method: Structural, optical and magnetic properties

Cd_1 − xMn_xS nanoclusters were synthesized by surfactant-assisted chemical method for different Manganese (Mn) concentration (0.40 ≤ x ≥ 0.10) at 60 °C in argon atmosphere. Incorporation of magnetic ions (Mn) results a decrease in band gap of Cd_1 − xMn_xS nanoclusters. The room temperature ferromagnetic behaviour is demonstrated first time in Cd_0.60Mn_0.40S nanoclusters by vibrating sample magneto (VSM) measurements and the origin of magnetization has been discussed.     

A fuzzy approach to transport optimization problem

This paper presents an algorithm to solve a fuzzy transportation problem in which demand, supply and transportation costs are uncertain. Existing solution methods convert a fuzzy transportation problem into two or more crisp transportation problems and solves it. But, the proposed algorithm solves a fuzzy transportation problem without converting it into a crisp transportation problem. This approach results in a fuzzy total transportation cost, which is a fuzzy number. Sudhagar score method is used to rank fuzzy numbers. In comparing results of existing methods with the proposed method, this algorithm outperforms the previous ones. Two numerical examples explain working procedure of the proposed algorithm.     

An electrochemical,in vitro bioactivity,and quantum chemical approach to nanostructured copolymer coatings for orthopedic applications

Conducting polymers represent a promising platform toward coating materials for implant technologies in recent years. In this investigation, copolymers based on pyrrole (Py) and 3,4-ethylenedioxythiophene (EDOT) were electrodeposited on 316L SS with various feed ratio of Py/EDOT through cyclic voltammetric technique. The surface and chemical structure of the synthesized copolymers were analyzed by SEM, AFM, FT-IR, and ¹H NMR spectroscopic analysis. The influence of comonomer feed ratio on electrochemical corrosion behavior was investigated in stimulated body fluid. A significant lower corrosion current with nobler shift in corrosion potential and higher charge transfer resistance values of copolymer-coated 316L SS were obtained and the comparisons were made with uncoated as well as their homo polymers. Furthermore, in vitro cell culture studies were performed on MG63 osteoblast human cells to confirm the biocompatibility of copolymer coatings. Quantum chemical approach was employed to verify the obtained experimental outcomes. As a result of this investigation, it was concluded that the performance of coatings was strongly dependent to the monomer feed ratio and the copolymer synthesized with 50:50 feed ratio showed high corrosion protection efficiency with improved cell growth on MG63 osteoblast cell.     

N-Ion-implanted TiO2 photoanodes in quantum dot-sensitized solar cells

Hierarchical nanostructured titanium dioxide (TiO(2)) clumps were fabricated using electrostatic spray with subsequent nitrogen-ion doping by an ion-implantation technique for improvement of energy conversion efficiency for quantum dot-sensitized solar cells (QDSCs). CdSe quantum dots were directly assembled on the produced N-ion-implanted TiO(2) photoanodes by chemical bath deposition, and their photovoltaic performance was evaluated in a polysulfide electrolyte with a Pt counter electrode. We found that the photovoltaic performance of TiO(2) electrodes was improved by nearly 145% upon N-ion implantation. The efficiency improvement seems to be due to (1) the enhancement of electron transport through the TiO(2) layer by inter-particle necking of primary TiO(2) particles and (2) an increase in the recombination resistance at TiO(2)/QD/electrolyte interfaces by healing the surface states or managing the oxygen vacancies upon N-ion doping. Therefore, N-ion-doped photoanodes offer a viable pathway to develop more efficient QD or dye-sensitized solar cells.     

Modification of the cyclone separator geometry for improving the performance using Taguchi and CFD approach

ABSTRACT

The cyclone separator performance has been affected by its high-pressure drop. The main geometric ratios such as outlet diameter, inlet width and inlet height and total height have been preferred to reduce the pressure drop and improve the performance of cyclone separator. These standard geometric values have been altered with the aid of design of experiment technique by Taguchi method for reducing the pressure drop. This changed new design produce low-pressure drop compared with the standard cyclone separator. Moreover, the collection efficiency of the new design is high when compared with standard cyclone separator. The pressure drop, Euler number, cut-off diameter and efficiency of the standard and new cyclone separator have been compared with the results of mathematical and computational fluid dynamics technique (CFD). The Reynolds stress turbulence model and discrete phase model have been used for simulating the cyclone separator in CFD. An acceptable agreement has been obtained between these results.