Proposal and development of radial air‐gap coreless generator suitable for small wind turbine used in urban area

Independent distributed power generation using small wind turbines is becoming more widespread as wind power generation increases. Installation of small wind turbines in densely populated urban areas is not only useful from the viewpoint of extracting wind power sources in weak‐wind areas but also for making renewable energy easier to access when power supplies are closer to consumers. It is from this point of view that the authors proposed “urban wind power generation” using a collective system with a number of small vertical wind turbines, and have developed a suitable generator for low‐speed vertical wind turbines such as a Savonius windmill. Based on a standard coreless generator, the proposed generator is designed to make the direction of the magnetic flux radial in order to install the magnets and coils on the outer end of the generator. The change of magnet composition and flux direction maximizes the speed of the flux change and output voltage within a limited space. With the above configuration, the power of the proposed generator is independent of the diameter. In this report, the authors describe and evaluate the fundamental performance of a prototype of the proposed generator. Based on the experiments, a maximum output power of 283 W was obtained. The obtained starting torque is small enough to begin rotation under weak wind conditions of no more than 1 m/s. Therefore, it is clear that the proposed “radial” coreless generator is suitable for self‐starting and producing high power at low wind speed. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(1): 26– 34, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20695     

Comparative study of behavior of inhaled samarium and cerium in mice

Distribution of Sm and Ce in mice was investigated after inhalation exposure to their oxide particles of 5 μm diameter and 15 mg/m3.Sm and Ce were mainly distributed in lung,their concentrations decreased with passing time,and their concentrations in lung were correlated with exposure periods.Concentrations of Ce were lower than that of Sm in each point.Sm was also distributed in the other organs and bone but Ce was scarcely detected.These results suggest that the behaviors of Sm and Ce inhaled were different,although their chemical properties are similar.     

Analysis of lightning surge propagation in wind farm

Wind power generation is expected to become more important in future distribution systems. Although several prospective reports such as IEC 61400‐24 and NREL SR‐500‐31115 indicate an insulation scheme and grounding design for lighting protection, there still seems to be too few investigations on the problems. This paper therefore discusses lightning surge analysis using a wind farm model with 2 or 10 ideal wind turbines. Changing parameters such as grounding resistance and lightning strike points, several cases were studied. As a result of the analysis using digital simulator ARENE, it is clear that the surge tends to propagate toward the end of a distribution line in a wind farm and there is the possibility of insulation accidents at the other wind turbines when lightning attacks a wind turbine. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 162(2): 30– 38, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20364     

Efficient production of L‐lactic acid by Crabtree‐negative yeast Candida boidinii

Industrial production of L ‐lactic acid, which in polymerized form as poly‐lactic acid is widely used as a biodegradable plastic, has been attracting world‐wide attention. By genetic engineering we constructed a strain of the Crabtree‐negative yeast Candida boidinii that efficiently produced a large amount of L ‐lactic acid. The alcohol fermentation pathway of C. boidinii was altered by disruption of the PDC1 gene encoding pyruvate decarboxylase, resulting in an ethanol production that was reduced to 17% of the wild‐type strain. The alcohol fermentation pathway of the PDC1 deletion strain was then successfully utilized for the synthesis of L ‐lactic acid by placing the bovine L ‐lactate dehydrogenase‐encoding gene under the control of the PDC1 promoter by targeted integration. Optimizing the conditions for batch culture in a 5 l jar‐fermenter resulted in an L ‐lactic acid production reaching 85.9 g/l within 48 h. This productivity (1.79 g/l/h) is the highest thus far reported for L ‐lactic acid‐producing yeasts. DDBJ/EMBL/GenBank nucleotide database with Accession Nos. AB440630 and AB440631. Copyright © 2009 John Wiley & Sons, Ltd.     

X-ray absorption fine structure study on residue bromine in carbons with different degrees of graphitization

The structure of bromine residue compounds was investigated by X-ray absorption fine structure (XAFS) in order to interpret where and how bromine is present in carbons with different degrees of graphitization. The residue compounds can be classified into three groups, as obtained from X-ray absorption near edge structure (XANES) spectra and the values of the intramolecular distance r_Br–Br determined by extended X-ray absorption fine structure (EXAFS). In Group I, prepared from the host carbons heat treated at temperatures higher than 1900 °C, bromine exists in the interlayer space of graphite in the form of Br₂ molecules with interaction of the π electrons of graphite. In Group III, from carbon heat treated at 1000 °C, most of the bromine probably reacts with carbon atoms having a dangling bond or functional groups. For Group II, where the host carbons are heat treated at intermediate temperatures, it is likely that bromine exists in undeveloped defects with a unique electronic state.     

Earthquake onset detection using spectro-ratio on multi-threshold time–frequency sub-band

Automatic onset detection and picking algorithm has been proposed by applying the spectro-ratio on time–frequency sub-band. The proposed algorithm does not need any parameter settings as it will work on data generated by either short or very broad band seismometers. Our algorithm is applied on local events from Cairo region recorded by three stations of the Egyptian National Seismic Network (ENSN). Maximum standard deviation is observed to be 0.113 s of the corresponding manual picks made by analysts.     

Glass transition and mechanical properties of PLLA and PDLLA‐PGA copolymer blends

The change of the glass transition temperatures (T_g) in the blend of poly(L ‐lactic acid) (PLLA) and the copolymers of poly(D,L ‐lactic acid) and poly(glycolic acid) (PDLLA‐PGA) with different D,L ‐lactic acid and glycolic acid composition ratio (50 : 50, 65 : 35, and 75 : 25) was studied by DSC. Dynamic mechanical measurement and tensile testing were performed at various temperatures around T_g of the blend. In the blend of PLLA and PDLLA‐PGA50 (composition ratio of PDLLA and PGA 50 : 50), T_g decreased from that of PLLA (about 58°C) to that of PDLLA‐PGA50 (about 30°C). A single step decrease was observed in the DSC curve around T_g between the weight fraction of PLLA (W(PLLA)) 1.0 and 0.7 (about 52°C) but two‐step changes in the curve are observed between W(PLLA) = 0.6 and 0.3. The T_g change between that of PLLA and that of PDLLA‐PGA and the appearance of two T_gs suggest the existence of PLLA rich amorphous region and PDLLA‐PGA copolymer rich amorphous region in the blend. A single step decrease of E′ occurs at around T_g of the pure PLLA but the two‐step decrease was observed at W(PLLA) = 0.6 and 0.4, supporting the existence of the PLLA rich region and PDLLA‐PGA rich region. Tensile testing for various blends at elevated temperature showed that the extension without yielding occurred above T_g of the blend. Partial miscibility is suggested for PLLA and PDLLA‐PGA copolymer blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2164–2173, 2004     

Radiation-induced polymerization of ethylene in pilot plant. III. Heavy-phase recycling process

Radiation-induced polymerization of ethylene using aqueous tert-butyl alcohol as medium was carried out in a large-scale pilot plant with a 50-liter central source-type reactor at a pressure of 105 to 395 kg/cm², temperature of 30° to 80°C, mean dose rate of 4.5 × 10⁴ to 1.9 × 10⁵ rads/hr, ethylene feed rate of 5.5 to 23.5 kg/hr, and medium feed rate of 21 to 102 l./hr. The space–time yield and molecular weight of the polymer were in the range of 4.7 to 16.8 g/l.-hr and 1.3 × 10⁴ to 8.9 × 10⁴, respectively. The space–time yield and molecular weight increased with mean residence time at 30°C, whereas at 80°C they became almost independent of the time. The space–time yield increased with pressure and dose rate, slightly decreased with temperature, and was maximum at ethylene molar fraction of 0.5. The polymer molecular weight increased with pressure and ethylene molar fraction, and decreased with dose rate and temperature. The total amount of deposited polymer on the reactor wall, source case wall, and scraping blades was usually less than 1 kg, which was negligibly small for the analysis of polymerization. Continuous discharge of the polymer slurry and production of fine-powder polyethylene were successfully carried out. In the central source-type reactor, a dose rate of 1.9 × 10⁵ rads/hr was obtained with a ⁶⁰Co source of ca. 12 kCi.     

Localization of the ROMK potassium channel to the apical membrane of distal nephron in rat kidney

BACKGROUND: The apical potassium (K+) channels mediate K+ recycling in thick ascending limb (TAL) and K+ secretion in cortical collecting duct (CCD). Recently, the cDNAs for a family of renal K+ channels, ROMK1, -2 and -3, were identified. Based on the biophysical properties and mRNA distribution, it is believed that these ROMK cDNAs encode the apical K+ channels of TAL and CCD. However, the information for cellular and subcellular localization of the ROMK proteins in these tubules is still not available. METHODS: Paraffin or frozen kidney sections from adult Sprague-Dawley rats were stained by polyclonal antibodies against the N- and C-terminal domain of ROMK. Immunoreactive staining was visualized by color development from horseradish peroxidase reaction. Membrane homogenates from kidney were analyzed by Western blot analysis. RESULTS: The polyclonal antibodies against cytoplasmic epitope of ROMK recognized a approximately 42 kD protein in the membrane homogenates from kidney, but not from liver. Staining by immunocytochemistry revealed that ROMK channels were localized to the apical membranes of the distal nephron in cortex and outer medulla, including thick ascending limb and collecting tubule. ROMK staining was absent in glomerulus, proximal tubule and inner medulla. Double staining of the tissue section with both ROMK-specific and H+-ATPase-specific antibodies revealed labeling of ROMK in the principal cells of the collecting tubules. CONCLUSIONS: These results further strengthen the idea that ROMK channels play important roles in the recycling of K+ in TAL and the secretion of K+ in CCD.