Stabilization of 6H-Hexagonal SrMnO3 Polymorph by Al2O3 insertion

We demonstrate the structural evolution of polymorphic phases in Al₂O₃-inserted SrMnO₃ ceramics synthesized by solid state reaction. While the 4H-hexagonal phase is predominant in pure SrMnO₃ ceramics, a small amount of 6H-hexagonal polymorph is identified in addition to the primary 4H-hexagonal SrMnO₃ and the secondary hexagonal SrAl₂O₄ phases in the as-sintered ceramics, evidenced by x-ray diffraction and subsequent Rietveld refinement analyses. The existence of the 6H-hexagonal SrMnO₃ phase is corroborated using Raman spectroscopy. The chemical compositions and electronic structures of the Al₂O₃-inserted SrMnO₃ compounds are also examined using energy dispersive spectroscopy and x-ray photoelectron spectroscopy, respectively. The first-principles calculations reveal that there is no clear difference between the total energies of 4H- and 6H-hexagonal polymorphs regardless of the presence/absence of Sr and oxygen vacancies. Possible origins are discussed with the estimation of actual strain based on the refined lattice parameter of 6H SrMnO₃.     

On colloid-chemical properties of some polymer composites

The influence of the vibrowave action on the properties of some disperse systems used in the textile industry has been considered. It has been noted that excitation of nonlinear oscillation in the audio band under resonant conditions leads to an increase in the degree of dispersion of distributed systems and an increase in their colloid stability. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 79, No. 1, pp. 133–138, January–February, 2006.     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Properties of Co-doped N-type FeSi2 processed by mechanical alloying

Iron-silicide was produced with a mechanical alloying process and consolidated through vacuum hot pressing. The as-milled powders were of metastable state and fully transformed into the ß-FeSi₂ phase through subsequent isothermal annealing. The as-consolidated iron silicides consisted of an untransformed mixture of α-Fe₂Si₅ and ?-FeSi phases and a partially transformed β-FeSi₂ phase was found in the low density compact. Isothermal annealing was carried out to induce transformation into a thermoelectric semiconducting β-FeSi₂ phase. The transformation behavior of the β-FeSi₂ was investigated utilizing DTA, SEM, and XRD analyses. Isothermal annealing at 830°C in vacuum led to a thermoelectric semiconducting β-FeSi₂ phase transformation, but some residual metallic α and ?-phases were unavoidable even after 96 hours of annealing. The iron silicide microstructures were investigated using SEM and TEM. The mechanical and thermoelectric properties of the β-FeSi₂ materials before and after isothermal annealing are characterized in this study.     

Analysis of impersonation attacks on systems using RF fingerprinting and low-end receivers

Recently, physical layer security commonly known as Radio Frequency (RF) fingerprinting has been proposed to provide an additional layer of security for wireless devices. A unique RF fingerprint can be used to establish the identity of a specific wireless device in order to prevent masquerading/impersonation attacks. In the literature, the performance of RF fingerprinting techniques is typically assessed using high-end (expensive) receiver hardware. However, in most practical situations receivers will not be high-end and will suffer from device specific impairments which affect the RF fingerprinting process. This paper evaluates the accuracy of RF fingerprinting employing low-end receivers. The vulnerability to an impersonation attack is assessed for a modulation-based RF fingerprinting system employing low-end commodity hardware (by legitimate and malicious users alike). Our results suggest that receiver impairment effectively decreases the success rate of impersonation attack on RF fingerprinting. In addition, the success rate of impersonation attack is receiver dependent.     

A secure and improved multi server authentication protocol using fuzzy commitment

Multimedia Tools and Applications - The advancement in communication and computation technologies has paved a way for connecting large number of heterogeneous devices to offer specified services....     

Thermoelectric properties of mechanically alloyed iron disilicides consolidated by various processes

Mn doped p-type iron disilicide powders have been produced by a mechanical alloying process. As-milled powders were of metastable state and mostly transformed to β-FeSi₂ phase by subsequent isothermal annealing. As-milled powders were consolidated by various processes such as sintering of the cold compact in vacuum, vacuum hot pressing (VHP), and spray drying/atmospheric plasma thermal spraying. Phase transitions during the processes were investigated using XRD, EDS, and SEM. As-consolidated specimens consisted of a mixture of α-Fe₂Si₅ and ε-FeSi phases, which were gradually transformed into a thermoelectric semiconducting α-FeSi₂ phase by subsequent isothermal annealing in the vicinity of 845°C in vacuum. However, some residual α and ε phases remained even after prolonged annealing. Thermoelectric properties were measured as a function of temperature and correlated with phase transformation. They showed optimum values in the vacuum hot pressed specimen due to a higher fraction of β phase and/or higher density.     

A probabilistic alternative to regression suites

Automated regression suites are essential in developing large applications, while maintaining reasonable quality and timetables. The main argument against the automation of regression suites, in addition to the cost of creation and maintenance, is the observation that if you run the same test many times, it becomes increasingly less likely to find bugs. To alleviate such problems, a new regression suite practice, using random test generators to create regression suites on-the-fly, is becoming more common. In this practice, instead of maintaining tests, we generate test suites on-the-fly by choosing several specifications and generating a number of tests from each specification.     

Nonlinear robust state feedback control system design for nonlinear uncertain systems

This paper presents a systematic approach to the design of a nonlinear robust dynamic state feedback controller for nonlinear uncertain systems using copies of the plant nonlinearities. The technique is based on the use of integral quadratic constraints and minimax linear quadratic regulator control, and uses a structured uncertainty representation. The approach combines a linear state feedback guaranteed cost controller and copies of the plant nonlinearities to form a robust nonlinear controller with a novel control architecture. A nonlinear state feedback controller is designed for a synchronous machine using the proposed method. The design provides improved stability and transient response in the presence of uncertainty and nonlinearity in the system and also provides a guaranteed bound on the cost function. An automatic voltage regulator to track reference terminal voltage is also provided by a state feedback equivalent robust nonlinear proportional integral controller. Copyright © 2016 John Wiley & Sons, Ltd.