Effect of coupling agent content on properties of composites made from polylactic acid and chrysanthemum waste

Chrysanthemum flower is among one of the highly sought after and widely planted flower crops, in particular for cultural and religious ceremonies. However, the chrysanthemum stem and stalk have little value and usually discard as by‐product waste from floristry. The objective of this research is to investigate the potential value of utilizing chrysanthemum stem and stalk as reinforcing fillers for thermoplastic composites. In this study, 2‐mm thick composite sheet containing predefined formulations of polylactic acid (PLA), chrysanthemum waste filler (CWF) ranging from 15 to 60 phr, and maleated polyethylene (MAPE) coupling agent up to 5 phr were prepared with the aid of Haake internal mixer and compression molding. The effect of MAPE loading on tensile, thermal, and morphological properties of PLA/CWF composites was investigated. The findings revealed that PLA/CWF composite attained improved tensile modulus compared to the neat PLA, and the tensile modulus increases with higher concentration of CWF. However, both tensile strength and elongation at break reduces with increase loading of CWF. Overall, PLA/CWF composites with MAPE shows better performance compared to those without MAPE, where an optimum strength of 21.8 MPa can be achieved with 60 phr CW and 3 phr MAPE. The measured tensile strength is comparable to alternatives natural fiber thermoplastic composites demonstrating its potential to be used in non‐structurally demanding application. J. VINYL ADDIT. TECHNOL., 26:10–16, 2020. © 2019 Society of Plastics Engineers     

Reversal of the Inflammatory Responses in Fabry Patient iPSC-Derived Cardiovascular Endothelial Cells by CRISPR/Cas9-Corrected Mutation

The late-onset type of Fabry disease (FD) with GLA IVS4 + 919G > A mutation has been shown to lead to cardiovascular dysfunctions. In order to eliminate variations in other aspects of the genetic background, we established the isogenic control of induced pluripotent stem cells (iPSCs) for the identification of the pathogenetic factors for FD phenotypes through CRISPR/Cas9 genomic editing. We adopted droplet digital PCR (ddPCR) to efficiently capture mutational events, thus enabling isolation of the corrected FD from FD-iPSCs. Both of these exhibited the characteristics of pluripotency and phenotypic plasticity, and they can be differentiated into endothelial cells (ECs). We demonstrated the phenotypic abnormalities in FD iPSC-derived ECs (FD-ECs), including intracellular Gb3 accumulation, autophagic flux impairment, and reactive oxygen species (ROS) production, and these abnormalities were rescued in isogenic control iPSC-derived ECs (corrected FD-ECs). Microarray profiling revealed that corrected FD-derived endothelial cells reversed the enrichment of genes in the pro-inflammatory pathway and validated the downregulation of NF-κB and the MAPK signaling pathway. Our findings highlighted the critical role of ECs in FD-associated vascular dysfunctions by establishing a reliable isogenic control and providing information on potential cellular targets to reduce the morbidity and mortality of FD patients with vascular complications.     

A Flexi-PEGDA Upconversion Implant for Wireless Brain Photodynamic Therapy

Near-infrared (NIR) activatable upconversion nanoparticles (UCNPs) enable wireless-based phototherapies by converting deep-tissue-penetrating NIR to visible light. UCNPs are therefore ideal as wireless transducers for photodynamic therapy (PDT) of deep-sited tumors. However, the retention of unsequestered UCNPs in tissue with minimal options for removal limits their clinical translation. To address this shortcoming, biocompatible UCNPs implants are developed to deliver upconversion photonic properties in a flexible, optical guide design. To enhance its translatability, the UCNPs implant is constructed with an FDA-approved poly(ethylene glycol) diacrylate (PEGDA) core clad with fluorinated ethylene propylene (FEP). The emission spectrum of the UCNPs implant can be tuned to overlap with the absorption spectra of the clinically relevant photosensitizer, 5-aminolevulinic acid (5-ALA). The UCNPs implant can wirelessly transmit upconverted visible light till 8 cm in length and in a bendable manner even when implanted underneath the skin or scalp. With this system, it is demonstrated that NIR-based chronic PDT is achievable in an untethered and noninvasive manner in a mouse xenograft glioblastoma multiforme (GBM) model. It is postulated that such encapsulated UCNPs implants represent a translational shift for wireless deep-tissue phototherapy by enabling sequestration of UCNPs without compromising wireless deep-tissue light delivery.     

Housing Equity Withdrawal in Australia: Prevalence,Patterns and Motivations in Mid-to-late Life

In an era of population ageing, the primary home is increasingly viewed as a personal resource that can perform a pension role in retirement. This article assesses the extent to which Australians aged 45 years and over withdraw housing equity through in situ mortgage equity withdrawal (MEW), downsizing and selling up. We find that the incidence of housing equity withdrawal has increased over the last decade despite a global financial crisis. MEW is the dominant form of equity release among those under pension age, while downsizing or selling up is more frequent among those above pension age. Downsizing and selling up are more likely to be prompted by adverse life events than MEW. Selling up is typically an option of last resort. Our findings offer insights into important debates around homeownership societies and the welfare role performed by owner-occupied housing in mid-to-late life.     

Studies on the respiratory health of primary school children in urban communities of Hong Kong

The first stage of a 2-year survey of respiratory morbidity in primary school children was conducted in two districts of Hong Kong in April/May 1989. One group (2009) of children was from Kwai Tsing District, which had high levels of exhaust emission from factories. The other group (1837) was from Southern District where atmospheric pollution was considered to be relatively low. After adjustment for gender, age, socioeconomic factors, child smoking and exposure to parental smoking, the prevalence ratios of sore throat, evening cough, cough for more than 3 months, morning phlegm and wheezing were found to be significantly higher in Kwai Tsing. The difference between the districts is likely to be related to the environmental air quality. The study, which is continuing, will provide the basis for an evaluation of the impact of new low sulphur fuel regulations introduced in July 1990.     

Investigation of assimilable organic carbon (AOC) and bacterial regrowth in drinking water distribution system

This paper investigated the variation of assimilable organic carbon (AOC) concentrations in water from several typical water treatment plants and distribution systems in a northern city of China. It is concluded from this study that: (1) The AOC in most of the product water of the studied water treatment plants and the water from the associated distribution systems could not meet the biostability criteria of 50-100 microg/L. (2) Only 4% of the measured AOC concentrations were less than 100 microg/L. However, about half of the measured AOC values were less than 200 microg/L. (3) Better source water quality resulted in lower AOC concentrations. (4) The variation of AOC concentrations in distribution systems was affected by chlorine oxidation and bacterial activity: the former resulted in an increase of AOC value while the latter led to a reduction in AOC. (5) The variation of AOC concentration followed different patterns in different distribution systems or different seasons due to their respective operational characteristics. (6) Less than 30% of AOC could be removed by a conventional treatment process, whereas 30-60% with a maximum of 50-60% could be removed by granular activated carbon (GAC). (7) The observation via scanning electron microscope (SEM) on distribution pipe tubercle samples demonstrated that the pipe inner wall was not smooth and bacteria multiplied in the crevice as well as in the interior wall of distribution pipes.     

A new method for characterizing denitrifying phosphorus removal bacteria by using three different types of electron acceptors

This study investigated the characteristics of denitrifying phosphorus removal bacteria by using three different types of electron acceptors as well as the positive role of nitrite in phosphorus removal process. Denitrifying phosphorous removal bacteria was enriched under anaerobic-anoxic (A/A) condition. To understand A/A sludge better, sludge from two other sources were also studied. These include sludges obtained from a lab-scale anaerobic-anoxic-aerobic (A/A/O) system and a local sewage treatment plant. Three types of possible electron acceptors (oxygen, nitrate and nitrite) were examined for their roles in phosphorus uptake. The results obtained indicated that oxygen, nitrate and nitrite were able to act as electron acceptors successfully. This observation suggested that in addition to the two well-accepted groups of phosphorus removal bacteria (one can only utilize oxygen to take up phosphorus, P(O), while the other can use both oxygen and nitrate, P(ON)), a new group of phosphorus removal bacteria, P(ON(n)), which could use oxygen, nitrate or nitrite to take up phosphorus was identified. The relative population of these three types of bacteria could be calculated from results obtainable from phosphorus uptake batch experiments with either oxygen or nitrate or nitrite as electron acceptor. The results obtained in this study showed that A/A sludge had similar phosphorus removal performance as the A/A/O sludge. However, it has better denitrifying phosphorus removal capability, which was demonstrated by the relative population of the three groups of bacteria. The results also suggested that nitrite was not an inhibitor to phosphorus removal process. Instead, it is an alternative electron acceptor to oxygen or nitrate.     

Interactive Mixture as a Rapid Drug Delivery System

The effectiveness of an interactive mixture as a rapid drug delivery system is compared with that of a solid dispersion. The influences of drug load, particle size, and crystallinity of these test systems are investigated. The interactive mixtures and solid dispersions were prepared from polyethylene glycol (PEG) 3350 and hydrophobic nifedipine drug by means of physical mixing and melting methods, respectively. The formed products were subjected to drug particle size and crystallinity analyses, and dissolution tests. In comparison with the interactive mixtures, the solid dispersions with low drug load were more effective as a rapid drug delivery system, as the size of a given batch of drug particles was markedly reduced by the molten PEG 3350. The rate and extent of drug dissolution were mainly promoted by decreasing effective drug particle size. However, these were lower in the solid dispersions than in the interactive mixtures when a high load of fine drug particles was used as the starting material. This was attributed to drug coarsening during the preparation of the solid dispersion. Unlike solid dispersions, the interactive mixtures could accommodate a high load of fine drug particles without compromising its capacity to enhance the rate and extent of drug dissolution. The interactive mixture is appropriate for use to deliver a fine hydrophobic drug in a formulation requiring a high drug load.