Multi-field coupling thermo-acoustic radiation using free-standing nano-thin films in a static magnetic field

Abstract

Thermo-acoustic radiation from nano-thin film has been widely reported these years. In this paper, a static magnetic field is introduced to enhance the acoustic power in the multi-field thermo-acoustic generation. The coupled thermo-acoustic system in a static magnetic field shares the same acoustical unit with very few additional components. In the presence of a static magnetic field, thin-film vibration is excited instead of being still in the classical thermo-acoustic system. Not surprisingly, a steady magnetic field has very little impact on the thermo-acoustic generation system when a constant amplitude sinusoidal current is introduced. The oscillation perpendicular to the nano-thin film is driven by the electromagnetic force. The system response of thermo-acoustics and magneto-acoustics can be generally matched when suitable parameters are introduced. The acoustical pressure output can be significantly improved in the presence of a static magnetic field although more electrical input power should be provided in the multi-field thermo-acoustic system. Evidently, the coupled multi-field acoustical system is able to handle more electrical power input and the power input can be more easily dissipated relatively. The results show that the acoustic response of this new multi-filed coupled system can be significantly improved as compared to the classical system without magnetic effects.     

陕西省略阳县干河坝金矿地质特征及矿床成因探讨

干河坝金矿床是南秦岭南段勉略康构造混杂岩带内属受岩相和构造双重控制的构造蚀变岩型金矿床。该矿床的矿体集中产于古生界泥盆系金家河岩组金家河千枚岩与乔子沟火山岩的岩性—构造接触带附近，多呈似层状、透镜状。为进一步探讨该矿床成因，通过对矿床成矿地质特征、地球化学背景及硫同位素的系统研究，认为：①该矿床的赋矿层位就是其初始矿源层；②经区域变质变形和多期构造活动，初始矿源层中的成矿物质活化、迁移，在近EW向张性裂隙中充填、沉淀而富集成矿。     

基于CDIO工程教育理念的化学工程与工艺专业培养模式研究与探索

我们针对现阶段国内工科院校教育现状,借助国际先进的CDIO工程教育模式,对合肥工业大学化学工程与工艺专业的教学体系、教学内容、教学方法及学生的考核制度等进行了改革。教改注重课程理论与实践环节的连接,引导学生主动探索,全面培养学生的CDIO工程能力,以培养合格的化学工程与工艺专业人才为目标。     

复合支护结构在深基坑边坡加固中的应用

粉喷桩一喷锚网复合支护是目前常用的支护结构，它具有技术低、工期短、安全可靠等特点，主要适用于地基沉积厚度大，含水量高，空隙比大于1．0，抗剪强度低，压缩性高，渗透性差的场地。     

抑制局部放电信号中周期性窄带干扰的子空间重构方法

为有效提取局部放电信号,提出一种基于子空间重构的窄带干扰抑制方法。对局部放电信号数据形成的HANKEL矩阵进行奇异值分解,将信号划分为窄带干扰子空间和局部放电信号子空间。利用子空间数据重构窄带干扰波形,然后与原始数据相减,得到抑制干扰后的局部放电信号。该方法能在保证局部放电信号失真较小的同时有效去除窄带干扰,抗随机干扰能力较强。仿真和实测信号的处理结果验证了其有效性。     

水下气动发射模型内流场仿真分析

利用FLUENT软件对某水下气动发射模型发射过程的内流场特性进行了仿真研究。基于标准κ-ε湍流模式和轴对称模型进行了瞬态内流场分析。使用自定义函数和动态层网格更新方法,对因阀开启和武器运动引起的内流场边界的变化进行了模拟。通过对发射气瓶在不同初压条件下的内流场仿真,分析了内弹道参数随时间的变化规律和发射装置内流场压强的空间分布规律。最后进行了水池发射试验,验证了仿真分析方法的有效性。     

局部放电信号中抑制周期性窄带干扰的逆向分离方法

为了有效提取局部放电信号,提出一种抑制周期性窄带干扰的逆向分离方法。该方法由两部分组成:利用矩阵束算法估计含噪局部放电信号中的窄带干扰频率;借助独立分量分析算法,逆向分离出抑制窄带干扰后的局部放电信号。针对在不同信噪比下的局部放电信号,分别运用小波、多小波消噪算法和该方法抑制窄带干扰。仿真结果表明,与小波、多小波相比,在信噪比低至?20d B时,该方法表现出更强的抗噪能力,同时能更好的保留原信号特征。现场测试信号的处理结果也验证了所提方法的有效性。     

Effect of Initial Grain Size on the Dynamic Recrystallization of Hot Deformation for 3003 Aluminum Alloy

The 3003 aluminum alloys with four different initial grain sizes were deformed by isothermal compression in the range of deformation temperature 300–500 °C at strain rate 0.01–10.0 s^?1 with Gleeble-1500 thermal simulator. The results show that the smaller the initial grain size of the alloy, the greater the required deformation resistance, and the smaller the peak strain, which is conducive to the occurrence of dynamic recrystallization (DRX). The DRX critical strain increases with the decrease of the deformation temperature or the increase of the strain rate, and the DRX volume fraction increases with the decrease of the strain rate and the increase of the deformation temperature. The average grain size of 3003 aluminum alloy after deformation is smaller than that before deformation. The smaller the initial grain size, the lower the critical recrystallization strain. So the DRX is carried out more fully, contributing to the thermoplastic deformation of the alloy.     

与神对话巴别塔的纸上幻象

在《圣经旧约创世纪》中．洪水过后的苍茫大地上．世上所有人说着同一种语言。在靠近巴比伦城的地方，人类齐心协力。要“传人类之名．以免分散各地”。建造起通天的巨塔。上帝慌了散至各处。人类的通天梦想破灭。言，使人们四散至各处。人类的通天梦想破灭。     

γ-(2,3-环氧丙烷)丙基三甲氧基硅烷水解研究

为获得充分水解,且尽量避免缩聚的有机硅氧烷水解产物,以γ-(2,3-环氧丙氧)丙基三甲氧基硅烷(GPT-MS)为例,对有机硅氧烷的水解工艺进行研究.结果表明,中性介质、常温搅拌有利于降低水解得到的Si-OH发生缩聚反应;Si-OH的缩聚反应随着水含量的增加而下降,GPTMS的水解、缩聚反应随着反应温度的提高而加快;GP...