Adaptive neural network output feedback control of incommensurate fractional-order PMSMs with input saturation via command filtering and state observer

Neural Computing and Applications - In this paper, an adaptive neural network (NN) output feedback control is investigated for incommensurate fractional-order permanent magnet synchronous motors...     

一种用于桩基础动力相互作用分析的桩单元复刚度矩阵

本文采用动力文克尔地基粱模型,在求得有限长桩运动微分方程通解的基础之上,导出了层状土中桩单元复刚度矩阵.提出了计算层状土中单桩动力阻抗的方法.本文方法具有单元划分简单,输入数据少,可以方便地处理不同约束条件和计算桩截面内力等优点.可以用于群桩动力阻抗及桩身内力的计算,也可以进行桩—土—桩运动相互作用分析.     

基于键图法的直流电网系统模型

为适应直流电网智能、高效、经济运行的要求,实现各换流站间的协调控制,基于六端直流电网物理仿真平台,将多端直流输电系统视为一个多输入、多输出、多控制目标的系统整体进行了数学建模。提出了适用于多节点、系统级仿真的换流器简化模型,分别讨论了各端电源、负载模型的简化方法,利用键图方法对六端树状直流电网进行了等效建模,并提取出其状态空间方程。最后根据电力系统的常规运行要求对直流电网的具体控制目标进行了数学提炼,写出控制问题的约束条件和指标函数,为进一步设计、优化协调控制器提供了基础。     

Regulated Breathing Effect of Silicon Negative Electrode for Dramatically Enhanced Performance of Li‐Ion Battery

Si is an attractive negative electrode material for lithium ion batteries due to its high specific capacity (≈3600 mAh g^–1). However, the huge volume swelling and shrinking during cycling, which mimics a breathing effect at the material/electrode/cell level, leads to several coupled issues including fracture of Si particles, unstable solid electrolyte interphase, and low Coulombic efficiency. In this work, the regulation of the breathing effect is reported by using Si–C yolk–shell nanocomposite which has been well‐developed by other researchers. The focus is on understanding how the nanoscaled materials design impacts the mechanical and electrochemical response at electrode level. For the first time, it is possible to observe one order of magnitude of reduction on breathing effect at the electrode level during cycling: the electrode thickness variation reduced down to 10%, comparing with 100% in the electrode with Si nanoparticles as active materials. The Si–C yolk–shell nanocomposite electrode exhibits excellent capacity retention and high cycle efficiency. In situ transmission electron microscopy and finite element simulations consistently reveals that the dramatically enhanced performance is associated with the regulated breathing of the Si in the new composite, therefore the suppression of the overall electrode expansion.     

从铜镉渣中回收锌、镉、铜试验研究

通过小型试验和工业试验,研究了一段浸出法从铜镉渣中浸出锌、镉、铜。试验结果表明:浸出体系中添加强氧化剂B可明显提高氧化速率和锌、镉浸出率,只需一段浸出,锌、镉浸出率均大于91%,且浸出液中杂质含量低,不需进一步除杂;铜不被浸出而是以海绵铜形式留在渣中,渣中铜质量分数为43%~46%,此渣可返回铜渣除氯系统循环利用。     

用于图像传输的改进的LDPC码译码算法

为了改善改进的加权比特翻转(IWBF)算法的误比特率性能以及译码收敛速度,结合并行比特翻转算法的特性,提出了在IWBF算法的每次迭代中一次更新多个比特的标准,并将这种算法应用于图像传输中。仿真结果表明,改进的算法不但误码性能优于IWBF算法约0.5 dB,性能明显改善,译码收敛速度也大大提高,并能实现图像的快速高质量传输。     

Deformation Behavior and Constitutive Equation Coupled the Grain Size of Semi-Solid Aluminum Alloy

Isothermal compression tests on Al-4Cu-Mg alloy were carried out in semi-solid state. Deformation behavior and microstructural evolution are discussed in this paper. Meanwhile, a new constitutive equation, which couples the grain size and liquid volume fraction, has been established for the semi-solid deformation behavior. The results show that the maximum difference between the calculated with the experimental data is less than 15%. The present equation is satisfactory for describing the correlation between the flow stress and microstructure of semi-solid Al-4Cu-Mg alloy. The coupled simulation of the deformation behavior and microstructural evolution during the semi-solid forming would be conducted easily through writing the present equation in a FE code.     

Study on Stark Effect in Optically Pumped Far-Infrared Laser

The output intensity of optically pumped NH3 molecules far-infrared laser (NH3-OPFIRL) was calculated by solving the density matrix equation and by means of iteration method. Meanwhile, the spectral characteristic of AC Stark splitting was studied. Finally, the F-P interferogram of NH3-OPFIRL pumped by CO2-10R(8) line was measured. The experimental results were in good agreement with the theoretical calculation results.     

杆式支撑换热器壳程性能数值分析及改进设计

用数值方法研究了杆式支撑换热器壳程的流体流动和传热性能，指出了杆式支撑换热器在结构和性能上存在的缺陷，并探讨了几种复合强化传热方法。为杆武支撑换热器的结构完善和推广应用奠定了理论基础。