Appraisal of ε-Caprolactam and Trimellitic Anhydride Potential as Novel Chain Extenders for Poly(lactic acid)

The potential of ε-caprolactam (CAP) and trimellitic anhydride (TMA) compounds as novel chain extenders for poly(lactic acid) (PLA) has been assessed; the amounts of 0.01, 0.025, and 0.05 wt% each additive have been added. The chain extension was evidenced by the increase in PLA/CAP and PLA/TMA viscosities in mixing torque measurements and by infrared spectroscopy. PLA reaction with CAP and TMA has also been confirmed from contact angle and surface free energy studies, which have shown that the increase in TMA amount decreased the hydrophilicity of PLA due to the decreased concentration of terminal surface hydroxyl groups. However, the addition of CAP accentuated the PLA hydrophilicity as indicated by the increase in the polar component of the surface energy. On the other hand, the glass transition temperature of PLA/TMA and PLA/CAP decreased as a result of a local plasticizing effect, which favored the chain mobility and the crystallization of PLA due to the concomitant nucleating effect of the chain extenders moieties too. Furthermore, the higher molecular weight of PLA/CAP and PLA/TMA was responsible for their increased thermal stability and higher impact strength with respect to PLA. POLYM. ENG. SCI., 60:944–955, 2020. © 2020 Society of Plastics Engineers     

Investigation of the mechanical and thermal fatigue properties of hybrid sol–gel coatings applied to AA2024 substrates

This research article reports on the response of various hybrid sol–gel materials when applied as coatings to pre-treated bare AA2024 substrates, to mechanical indentation and cyclic thermal stimuli, in order to determine their usefulness in aeronautical applications. Three groups of hybrid sol–gel-coated samples were prepared using various organosilanes and transition metal oxides. The characterization of the materials revealed that the presence of the organic functionalities, especially the methacrylate group, has a noticeable effect on the mechanical response of the hybrid coatings, in particular their flexibility. The presence of methacrylate group in the cured material gives it ability to flex which influenced the thermal fatigue characteristics of the coatings which are able to withstand the cyclic temperature regimes of 82 ± 3 to ?37 ± 3°C over 25 2 h cycles. This capability to maintain substrate protection is reflected in the corrosion resistance of the coatings as measured using electrochemical impedance spectroscopy and accelerated exposure testing. This result is important, as it shows that hybrid sol–gel materials can be used in applications where protecting a metal or ally substrate is paramount, especially in thermally volatile environments.     

Oxidation Behavior of Aerospace Materials in High Enthalpy Flows Using an Oxyacetylene Torch Facility

The oxyacetylene torch facility is used to measure the ablation rates of graphite and the surface temperatures of different aerospace materials. The free‐stream flame environment is characterized as a function of flame chemistry for heat flux, pO₂, and flow velocity. Measured ablation rates for graphite increase as a function of increasing heat flux and pO₂, which are validated by applying an oxygen diffusion based model. The model uses experimentally measured values for temperature, pO₂, and gas velocity in order to confirm torch testing results are reliable and reproducible. Surface temperatures of ultra‐high temperature ceramic composites are measured as a function of increasing heat flux and show an enthalpic cooling effect on the flame during oxidation testing.     

Determination of the internal morphology of poly (D,L-lactide) microspheres using stereological methods

The morphological characteristics of the internal structure of poly (D,L-lactide) microspheres have been determined by stereological methods in two different formulations of microspheres, with different internal structures, prepared by using a double emulsion method. In one formulation the internal emulsion was produced by homogenisation at 3000 rpm, whilst the other was prepared at 11000 rpm. As expected the formulation prepared at the lower speed contained larger and more broadly distributed pores than that prepared at the higher speed. The porosity, pore size distribution and total internal surface area of the microspheres were obtained by stereological methods from electron microscopic measurements of the sectioned microspheres. It was found that whilst the porosity of the microspheres was 0.6 in both formulations, the preparation method gave rise to large differences in their pore size distribution characteristics. The pore size distribution was simulated by computer modelling to validate and compare alternative stereological algorithms. It was found that the Saltykov unfolding method predicts the measured pore size distribution more accurately than the Cruz-Orive unfolding method (at significance level alpha=0.1). This finding was attributed to the violation of one of the basic assumptions of the Cruz-Orive unfolding method.     

The imprinted domain in mouse distal Chromosome 7: reagents for mutagenesis and sequencing

BACKGROUND: Right lower quadrant abdominal pain may pose a diagnostic problem in patients with cystic fibrosis. Abdominal ultrasound examination, used commonly in the diagnostic work-up, may reveal abnormalities of the appendix. However, interpretation of such findings is problematic, because the appearance of the gastrointestinal system during routine examination has not been documented in patients with cystic fibrosis. The purpose of this study was to investigate the findings during routine abdominal ultrasound scans in our cohort of patients with cystic fibrosis and in control subjects. METHODS: Abdominal ultrasound scans were performed prospectively during routine clinic visits in a cohort of patients with cystic fibrosis. RESULTS: Fifty patients aged 10+/-6 years, (range, 0.5-28 years) were examined; 45 had pancreatic insufficiency. Four patients (3 with pancreatic insufficiency) reported right lower quadrant pain at the time of the scan. According to standard ultrasound criteria, the appearance of the appendix was abnormal in 8 patients (16%), 6 had a mucoid appendix, and 2 had a pathologically thickened appendiceal wall. Only 1 of these 8 patients mentioned abdominal pain at the time of the study. Other incidental findings included gallstones (3 patients), intussusception (2 patients), and pancreatic cyst (1 patient). CONCLUSIONS: Abnormalities can be observed during routine abdominal ultrasonographic studies in cystic fibrosis. These findings may not be associated with abdominal pain; their clinical relevance needs further investigation.     

The urinary ratio of 5-hydroxytryptophol to 5-hydroxyindole-3-acetic acid in surgical patients with chronic alcohol misuse

Interactions among growth factors are important in a variety of physiological and pathological processes. The regulation of IGF-I mRNA expression by bFGF was investigated in cultured rat Müller cells and the mechanism of regulation studied. Müller cells from 1- to 3-day-old Sprague-Dawley rats were isolated and cultured with Eagle MEM+10% FCS. Cultured cells were identified by immunocytochemistry using antibodies against vimentin, carbonic anhydrase C, and glutamine synthetase. Cells of passage 1-4 were treated with bFGF, the PKC inhibitor H-7, calphostin C, the PKC activator PMA or the PKA inhibitor H-89, as well as the adenylate cyclase activator forskolin, or adenylate cyclase inhibitor SQ22536. IGF-I and bFGF expression levels were assessed by Northern blot analysis. The addition of bFGF to culture medium down-regulated IGF-I expression in a dose- and time-dependent manner. Decrease of IGF-I expression started at a bFGF concentration of 1 ng ml-1. IGF-I mRNA level declined to 44% of baseline level at 10 ng ml-1 of bFGF, and reached a trough of 40% at 50 ng ml-1. At 10 ng ml-1 of bFGF, down-regulation of IGF-I expression was observed as early as 4 hr (60%) after treatment, and reached a trough of 42% by 8 hr. The temporal and concentration dependence of IGF-I expression by addition of the PKC activator PMA, to culture medium was similar to that due to the addition of bFGF. The down-regulation of IGF-I expression by bFGF (10 ng ml-1) and PMA (0.1 microM) was blocked by the PKC inhibitors H-7 (30 microM) and calphostin C (1 microM). Forskolin (5 microM), an adenylate cyclase activator, had activator, had no effect on IGF-I expression. SQ22536 (100 microM), an adenylate cyclase inhibitor, and H-89, a PKA inhibitor, had no inhibitory effect on bFGF-induced down-regulation of IGF-I expression. These results indicate that bFGF down-regulates IGF-I expression in cultured rat M uller cells through PKC activation.     

Linkage of proximal myotonic myopathy to chromosome 3q

We performed genetic linkage analysis in nine German proximal myotonic myopathy (PROMM) families using DNA-markers D3S1541 and D3S1589 from the region of the recently discovered gene locus of myotonic dystrophy type 2 (DM2) on chromosome 3q. Two-point analysis supplied an lod score of 5.9. We conclude that a gene causing PROMM is located on chromosome 3q. PROMM and DM2 may be allelic disorders or may be caused by closely linked genes.     

Using fluorescence-based human androgen receptor gene assay to analyze the clonality of microdissected dendritic cell tumors

The AGT1 permease is a alpha-glucoside-H+ symporter responsible for the active transport of maltose, trehalose, maltotriose, alpha-methylglucoside, melezitose and sucrose. In wild-type as well as in MAL constitutive strains, alpha-methylglucoside seemed to be the best inducer of transport activity, while trehalose had no inducing effect. Based on the initial rates of transport it seems that the sugar preferentially transported by this permease is trehalose, followed by sucrose.