Full-duplex overlay cognitive wireless powered communication network using RF energy harvesting

In this paper, a novel full-duplex overlay cognitive wireless powered communication network (FD-OCWPCN) is proposed where a full-duplex (FD) hybrid-access point (H-AP) supports the full access of all battery-free secondary users (SUs). The H-AP broadcasts wireless power to empower the nearby SUs in the downlink (DL) phase while decoding the information transmitted uplink (UL) phase by the SUs, simultaneously. To overcome the self-interference (SI) phenomenon in FD-OCWPCN, the problem of maximizing the system sum-throughput with optimal UL-DL transmission/reception time and H-AP’s transmit power allocation is considered. This problem is non-convex under perfect/imperfect SI cancelation (SIC), so we employ the active interference temperature control and the gradient projection techniques to effectively reduce it into a convex problem. Closed-form expressions for the perfect/imperfect SIC cases are also derived. To assess the performance of the FD-OCWPCN, a comparison with a half-duplex OCWPCN (HD-OCWPCN) is provided. The achievable average sum-throughput for different FD/HD-OCWPCN is compared in the context of the average and peak transmit power at the H-AP, the number of SUs, path loss exponent and fairness metric. The simulation results depict the superiority of the FD-OCWPCN over the HD-OCWPCN for the perfect SIC and the effective imperfect SIC.

     

Toward a better understanding of multifunctional cement-based materials: The impact of graphite nanoplatelets (GNPs)

The impact of graphite nanoplatelets (GNPs) on the physical and mechanical properties of cementitious nanocomposites was investigated. A market-available premixed mortar was modified with 0.01% by weight of cement of commercial GNPs characterized by two distinctively different aspect ratios.The rheological behavior of the GNP-modified fresh admixtures was thoroughly evaluated. Hardened cementitious nanocomposites were investigated in terms of density, microstructure (Scanning Electron Microscopy, SEM and micro–Computed Tomography, μ-CT), mechanical properties (three-point bending and compression tests), and physical properties (electrochemical impedance spectroscopy, EIS and thermal conductivity measurements). At 28 days, all GNP-modified mortars showed about 12% increased density. Mortars reinforced with high aspect ratio GNPs exhibited the highest compressive and flexural strength: about 14% and 4% improvements compared to control sample, respectively. Conversely, low aspect ratio GNPs led to cementitious nanocomposites characterized by 36% decreased electrical resistivity combined with 60% increased thermal conductivity with respect to the control sample.     

A multilevel sampled‐data approach for resilient navigation and control of autonomous systems

Autonomous systems are rapidly becoming an integrated part of the modern life. Safe and secure navigation and control of these systems present significant challenges in the presence of uncertainties, physical failures, and cyber attacks. In this paper, we formulate a navigation and control problem for autonomous systems using a multilevel control structure, in which the high‐level reference commands are limited by a saturation function, whereas the low‐level controller tracks the reference by compensating for disturbances and uncertainties. For this purpose, we consider a class of nested, uncertain, multiple‐input–multiple‐output systems subject to reference command saturation, possibly with nonminimum phase zeros. A multirate output‐feedback adaptive controller is developed as the low‐level controller. The sampled‐data (SD) design of this controller facilitates the direct implementation on digital computers, where the input/output signals are available at discrete time instances with different sampling rates. In addition, stealthy zero‐dynamics attacks become detectable by considering a multirate SD formulation. Robust stability and performance of the overall closed‐loop system with command saturation and multirate adaptive control are analyzed. Simulation scenarios for navigation and control of a fixed‐wing drone under failures/attacks are provided to validate the theoretical findings.     

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity, permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.     

Bitumen-water interfacial tension modeling by using subtractive clustering method

Calculation of interfacial tension during bitumen production is a crucial issue in heavy crude oil history. Upon variation in pressure, temperature and phases composition, interfacial tension between bitumen and water change. In this work a sophisticated method called subtractive clustering was utilized to predict dynamic interfacial tension between bitumen and water. The subtractive clustering method is composed of optimized fuzzy logic algorithm. A data bank which is collected from open-source literature, is used to create a reliable model. Then the prediction accuracy of the measured dynamic interfacial tension using subtractive clustering have been examined. Results state that the comparison of measured interfacial tension and predicted interfacial tension indicate acceptable accuracy of proposed model. Also more than 90 percent of data points have less than 3 percent absolute error.     

Comparison of the Calculated Drought Return Periods Using Tri-variate and Bivariate Copula Functions Under Climate Change Condition

Water Resources Management - Concerning the various effects of climate change on intensifying extreme weather phenomena all around the world, studying its possible consequences in the following...     

Multilayer assembly of ionic starches on old corrugated container recycled cellulosic fibers

In this study, old corrugated container recycled fibers were treated with polyelectrolyte multilayers consisting of biopolymer cationic starch with two degrees of substitution (DS) each in combination with one anionic starch. Pulp zeta potential, paper strength and the thin layer ellipsometry technique were applied to examine the influence of cationic starch DS on the formation of polyelectrolyte multilayers. The results indicated a significant interaction between the DS of cationic starch and the number of ionic starch layers formed. When low‐DS cationic starch was used, the pulp zeta potential and the paper strength increased significantly in assembling the first cationic layer. However, in depositing high‐DS cationic starch a greater zeta potential and a stronger influence on the paper strength were observed with a larger number of starch layers. This was confirmed by thin layer ellipsometry when a greater thickness of multilayers was achieved by employing high‐DS cationic starch to form a higher number of layers. © 2017 Society of Chemical Industry     

Reactive,nonreactive, and flash spark plasma sintering of Al2O3/SiC composites—A comparative study

The influence of different SPS-based methods, that is, conventional spark plasma sintering (SPS), flash SPS (FSPS), and reactive SPS (RSPS) on the properties of Al₂O₃/SiC composite was investigated. It was shown that the application of preliminary high energy ball milling of the powders significantly enhances the sinterability of the ceramics. It was also demonstrated that FSPS provides unique conditions for rapid, that is, less than a minute, consolidation of refractory ceramics. The Al₂O₃-20 wt% SiC composite produced by FSPS possesses the highest relative density (~99%), fracture toughness (7.5 MPa m^1/2), hardness (20.3 GPa) and wear resistance among all ceramics produced by other SPS-based approaches with dwelling time 10 minutes. The RSPS ceramics hold the highest Young's modulus (390 GPa). Substitution of micron-sized Al₂O₃ particles by nano alumina does not lead to measurable enhancement of the mechanical properties.