Studies on the toxicity of pulp and paper mill effluents—I. Mutagenicity of the sediment samples derived from Kraft paper mills

Sediment samples collected at three different coastal points (Shinguu, Ooigawa and Tagonoura) were extracted with diethylether and then methanol. Each extract was separated into five fractions by high-speed liquid chromatography and they were submitted to mutagenic assay using B. subtilis and S. typhimurium and to GC-MS analysis.The ether fraction of sediment sample from Shinguu showed DNA damaging potency on B. subtilis and exhibited mutagenic effect on S. typhimurium TA 98, TA 100 and TA 1537. 2,4,6-Trichlorophenol, 3,4,5,6-tetrachloroguaiacol, dehydroabietic acid, pyrene and fluoranthene were mutagenic substances among 28 substances identified and tested.     

Variable stage-independent double sampling plan with screening for acceptance quality loss limit inspection scheme

The quality loss suggested by Taguchi has been recognised as a new quality evaluation based on variable property instead of the quality evaluation based on traditional attribute property such as the proportion of nonconforming items. Some variable sampling inspection plans in order to assure the quality have been considered. As one of those sampling inspection plans, the single sampling plan with screening (SSPS) has been constructed for acceptance quality loss limit inspection scheme. Further, the repetitive group sampling plan with screening (RGSPS) has been developed for reducing the average total inspection (ATI). Although ATI by RGSPS has successfully been reduced in comparison with ATI by SSPS, RGSPS may sometimes increase the average sampling frequency (ASF) in return for reducing ATI. In this study, the stage-independent double sampling plan with screening (SIDSPS) based on the concept of the acceptance quality loss limit inspection scheme is proposed under the consideration of the trade-off between ATI and ASF. Through some numerical comparisons about ATI and ASF in SSPS, RGSPS, and SIDSPS, the usefulness of SIDSPS proposed in this study is confirmed.     

Application of ergothioneine-rich extract from an edible mushroom Flammulina velutipes for melanosis prevention in shrimp,Penaeus monodon and Litopenaeus vannamei

This report investigated the melanosis-inhibiting properties of crude water soluble extract from the base and fruiting body waste of an edible mushroom (Flammulina velutipes) containing 9.13 ± 2.03 mg/mL 2-thiol-l-histidine-betaine (ergothioneine, ESH). Immersion of live full-grown black tiger shrimp (Penaeus monodon) and Pacific white shrimp (Litopenaeus vannamei) in a 0.5% w/v solution of mushroom extract for 1 h significantly decreased polyphenoloxidase (PPO) activity in shrimp hemolymph and expression of the prophenoloxidase (proPO) gene in hemocytes. Consequently, the development of melanosis in the treated shrimp during ice storage was prevented. Treatment with a 0.05% w/v solution of sodium sulfite and 4-hexyl-1,3-benzenediol had a similar effect. Enzyme assays showed that ESH is a non-competitive inhibitor. It is proposed that ESH possibly interacts directly with Cu²⁺ at the putative binding sites of PPO and proPO, based on copper-chelating activity analyses, thus preventing melanosis in the shrimp. This study indicated that application of ESH-rich F. velutipes mushroom extract from trimming waste is an effective natural alternative to synthetic melanosis-inhibiting agents to prevent postmortem melanosis in shrimp.     

Geotechnical Aspects of the Sumatra Earthquake of September 30, 2009, Indonesia

This paper reports and discusses the results of a field survey conducted by a joint scientific group from Japan and Indonesia to assess the geotechnical aspects of the Sumatra earthquake (M_w=7.6) of September 30, 2009. The studied area included the Padang and Pariaman cities, where a number of buildings collapsed as a result of strong shaking, and a mountainous part of the Pariaman district, a place where massive landslides buried several villages, claiming more than 400 human lives. The main objective of the survey was to investigate the causes and mechanisms of catastrophic landslides; however, other geotechnical problems such as lateral spread and liquefaction were also addressed. Field observations indicated that the catastrophic landslides occurred on relatively gentle slopes, then mobilized into debris flows, and traveled several hundred meters from their points of origin. The failure surfaces developed along the boundary of highly weathered pumice tuff with more intact and less weathered bedrock. Data from a portable cone penetration test showed that the sliding material was rather weak, having SPT N-values in the range of 5-10. The results of the field survey suggested that the main cause of slope instability was high pore-water pressures that generated in the soil mass during the earthquake.     

Effect of α-substituents on molecular motion and wetting behaviors of poly(fluoroalkyl acrylate) thin films with short fluoroalkyl side chains

The effect of α-substituent on the molecular motion and wetting behavior of poly{2-(perfluorobutyl)ethyl acrylate} [PFA-C₄], poly{2-(perfluorobutyl)ethyl methacrylate} [PFMA-C₄], poly{2-(perfluorobutyl)ethyl α-fluoroacrylate} [PFFA-C₄], and poly{2-(perfluorobutyl)ethyl α-chloroacrylate} [PFClA-C₄] films were characterized by dynamic contact angle measurement, lateral force microscopy (LFM), wide angle X-ray diffraction (WAXD), and X-ray photoelectron spectroscopy (XPS). WAXD of oriented PFClA-C₄ fiber suggested the presence of rod-like chain due to the presence of bulky α-substituent. The glass transition temperature (T_g) of PFFA-C₄ and PFClA-C₄ were well above the room temperature. The water repellencies of PFFA-C₄ and PFClA-C₄ were as high as that of PFMA-C₄ and their oil repellency of PFFA-C₄ and PFClA-C₄ was higher than the PFMA-C_4. This result was originated from the low main chain mobility of PFFA-C₄ and PFClA-C₄ due to the presence of bulky α-substituents. The effect of molecular motion on water repellency was clarified by the results of temperature dependence studies of dynamic contact angle, LFM, and surface chemical composition measured by XPS.     

Lessons from Earthquakes in Recent Times and their Effects on the Development of Geotechnology

This paper first reviews the earthquakes that occurred since 1995 and then outlines the significant lessons learnt from disasters. The discussion then goes into the induced development of engineering practices that were triggered by those disasters. It is clear that major development occurred in design philosophies, soil improvement, and facilities for research. The last section of this paper addresses the compound effects of earthquakes and rainfall that may make the extent of the disasters worse.     

Synthesis of boron carbide powder from polyvinyl borate precursor

Polyvinyl borate (PVBO) was prepared by the condensation of poly(vinyl alcohol) (PVA) and boric acid, and used as a precursor for boron carbide. Boron carbide powder was synthesized by the pyrolysis of the PVBO precursor in air at 600 °C for 2 h, followed by heat treatment in Ar flow at 1300 °C for 5 h, which is a relatively low temperature compared with conventional carbothermal methods. Pyrolysis of the PVBO precursor resulted in submicron-size particles of B₂O₃ dispersed in a carbon matrix. In addition, the pyrolysis temperature governed the carbon content in the pyrolyzed product of the PVBO precursor, which led to the synthesis of crystalline boron carbide powder with little free carbon.     

Corrosion resistance of structural materials in high-temperature aqueous sulfuric acids in thermochemical water-splitting iodine–sulfur process

Very harsh environments exist in the iodine–sulfur process for hydrogen production. Structural materials for sulfuric acid vaporizers and concentrators are exposed to high-temperature corrosive environments. Immersion tests were carried out to evaluate the corrosion resistance of ceramics and to evaluate corrosion-resistant metals exposed to environments of aqueous sulfuric acids at temperatures of 320, 380, and 460 °C, and pressure of 2 MPa. The aqueous sulfuric acid concentrations for the temperatures were 75, 85, and 95 wt%, respectively. Ceramic specimens of silicon carbides (SiC), silicon-impregnated silicon carbides (Si–SiC), and silicon nitrides (Si₃N₄) showed excellent corrosion resistance from weight loss measurements after exposure to 75, 85, and 95 wt% sulfuric acid. High-silicon irons with silicon content of 20 wt% showed a fair measure of corrosion resistance. However, evidence of crack formation was detected via microscopy. Silicon enriched steels severely suffered from uniform corrosion with a corrosion rate in 95 wt% sulfuric acid of approximately 1 g m⁻² h⁻¹. Among the tested materials, the ceramics SiC, Si–SiC, and Si₃N₄ were found to be suitable candidates for structural materials in direct contact with the considered environments.     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.