Input-parallel output-parallel configuration of boost half bridge DC-DC converter with control strategy

The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.     

大规模MIMO系统下的低复杂度迫零预编码技术

针对大规模天线技术导致传统迫零(zero-forcing, ZF)预编码复杂度上升的问题,提出了一种低复杂度预编码技术。首先利用对称超松弛迭代(semi-iteration symmetric successive overrelaxation method, SSOR)技术优化信道矩阵求逆复杂度的问题;然后利用切比雪夫半迭代法(semi-iteration, SI)加速SSOR迭代(semi-iteration symmetric successive overrelaxation method, SI-SSOR)的收敛速度,使得ZF预编码可以快速的收敛。实验结果表明,SI-SSOR预编码在误码率和传输速率上都有非常好的性能。切比雪夫半迭代法加速的SSOR预编码技术通过2次迭代就可以近似达到传统ZF预编码性能的95%以上,同时利用相对于迫零预编码更少的计算资源,因此,SI-SSOR预编码技术可以作为无线通信抑制干扰的重要手段。     

Siting park-and-ride facilities using a multi-objective spatial optimization model

Park-and-ride services are an important component of many public transportation systems in the United States. Locating park-and-ride facilities is an essential step when planning for these services. In this research we focus on three major siting/modeling concerns that need to be addressed when siting park-and-ride facilities: covering as much potential demand as possible, locating park-and-ride facilities as close as possible to major roadways, and siting such facilities in the context of an existing system. Unfortunately, existing models do not enable each of these concerns to be simultaneously addressed. This paper presents a multi-objective spatial optimization model for integrating these considerations. This model is applied for siting park-and-ride facilities in Columbus, Ohio. Application results show the usefulness of the developed model in supporting transit planning in an urban region.     

Giant Anomalous Hall and Nernst Conductivities in Magnetic All-d Metal Heusler Alloys

All-d Heuslers are a category of novel compounds combining versatile functionalities such as caloric responses and spintronics with enhanced mechanical properties. Despite the promising transport properties (anomalous Hall (AHC) and anomalous Nernst (ANC) conductivities) shown in the conventional Co₂XY Heuslers with p-d hybridization, the all-d Heuslers with only d-d hybridization open a new horizon to search for new candidates with outstanding transport properties. In this work, the AHC and ANC are evaluated for thermodynamically stable ferro/ferri-magnetic all-d-metal regular Heusler compounds based on high-throughput first-principles calculations. It is observed that quite a few materials exhibit giant AHCs and ANCs, such as cubic Re₂TaMn with an AHC of 2011 S cm^-1, and tetragonal Pt₂CrRh with an AHC of 1966 S cm^-1 and an ANC of 7.50 A m^-1K^-1. Comprehensive analysis on the electronic structure reveals that the high AHC can be attributed to the occurrence of the Weyl nodes or gapped nodal lines in the neighborhood of the Fermi level. The correlations between such transport properties and the number of valence electrons are also thoroughly investigated, which provides a practical guidance to tailor AHC and ANC via chemical doping for transverse thermoelectric applications.     

Senti‐CS: Building a lexical resource for sentiment analysis using subjective feature selection and normalized Chi‐Square‐based feature weight generation

Sentiment analysis involves the detection of sentiment content of text using natural language processing. Natural language processing is a very challenging task due to syntactic ambiguities, named entity recognition, use of slangs, jargons, sarcasm, abbreviations and contextual sensitivity. Sentiment analysis can be performed using supervised as well as unsupervised approaches. As the amount of data grows, unsupervised approaches become vital as they cut down on the learning time and the requirements for availability of a labelled dataset. Sentiment lexicons provide an easy application of unsupervised algorithms for text classification. SentiWordNet is a lexical resource widely employed by many researchers for sentiment analysis and polarity classification. However, the reported performance levels need improvement. The proposed research is focused on raising the performance of SentiWordNet3.0 by using it as a labelled corpus to build another sentiment lexicon, named Senti‐CS. The part of speech information, usage based ranks and sentiment scores are used to calculate Chi‐Square‐based feature weight for each unique subjective term/part‐of‐speech pair extracted from SentiWordNet3.0. This weight is then normalized in a range of ?1 to +1 using min–max normalization. Senti‐CS based sentiment analysis framework is presented and applied on a large dataset of 50000 movie reviews. These results are then compared with baseline SentiWordNet, Mutual Information and Information Gain techniques. State of the art comparison is performed for the Cornell movie review dataset. The analyses of results indicate that the proposed approach outperforms state‐of‐the‐art classifiers.     

Utilizing settling tests to design a conventional upflow settling tank modified with inclined plates

This paper examines the relationships between the turbidity removal efficiency (TRE), the surface overflow rate (SOR), and the detention time (D(t)) in settling column and jar tests, as well as the performance of a conventional upflow settling tank modified with inclined plates in the upper zone. The experimental results showed that the SOR obtained from the flocculent settling column test can be increased by 30% and the corresponding D(t) can be decreased by 75% with a variation in TRE of less than 7%. The TRE of flocculent settling in the jar test coincided with the performance of the modified upflow settling tank, while the results of the settling column test were slightly different. For plain settling, the SOR obtained from jar and settling column tests should be divided by 3 and 2, respectively, before possible use in the design of the modified upflow settling tank. Two empirical models with 1.0% error in the TRE predictions were developed to facilitate the design of the modified upflow settling tank.     

Assessing the impact of palmitic,myristic and lauric acids on hydrogen production from glucose fermentation by mixed anaerobic granular cultures

The effects of lauric (LUA), myristic (MA), palmitic (PA), and a mixture of myristic:palmitic (MA:PA) acids on hydrogen (H₂) production from glucose degradation using anaerobic mixed cultures were assessed at 37 °C with an initial pH set at 5.0 and 7.131 mM of each acid. The maximum H₂ yield (2.53 ± 0.18 mol mol⁻¹ glucose) was observed in cultures treated with PA. A principal component analysis (PCA) of the by-products and the microbial population data sets detected similarities between the controls and PA treated cultures; however, differences were observed between the controls and PA treated cultures in comparison to the MA and LUA treated cultures. The flux balance analysis (FBA) showed that PA decreased the quantity of H₂ consumed via homoacetogenesis compared to the other LCFAs. The control culture was dominated by Thermoanaerovibrio acidaminovorans (60%), Geobacillus sp. and Eubacterium sp. (28%), while Clostridium sp. was less than 1%. Treatment with PA, MA, MA:PA, or LUA increased the H₂ producers (Clostridium sp. and Bacillus sp.) population by approximately 48, 67, 86, and 86%, respectively.     

The effect of computer-assisted cooperative learning methods and group size on the EFL learners’ achievement in communication skills

This study explored the effect of cooperative learning small group size and two different instructional modes (positive interdependence vs. individual accountability) on English as a Foreign Language (EFL) undergraduate learners’ communication skills (speaking and writing) achievement in computer-based environments. The study also examined the effects of disclosing/blinding the participants’ identities while interacting around computers on their post-test. The findings of the study revealed that the computer-based environment enabled the participants to blind their identities and reduce their anxiety from face-to-face debate, and so was very helpful in developing their communication skills. The use of the individual accountability mode was quite useful compared with the positive interdependence mode as it enabled all group members to perform their roles significantly. The 5-student group also significantly outperformed other groups of 2-7 members on the post-test communication skills. In conclusion, the findings of this study bring us a step closer to understanding the technique of cooperative language learning and group size.