Functionally Graded Ceramics Fabricated with Side‐by‐Side Tape Casting for Use in Magnetic Refrigeration

Functionally graded ceramic tapes have been fabricated by a side‐by‐side tape casting technique. This study shows the possibility and describes the main principles of adjacent coflow of slurries resulting in formation of thin plates of graded ceramic material. Results showed that the small variations of solvent and binder system concentrations have a substantial effect on slurry viscosity. Varying these parameters showed that side‐by‐side tape casting with a well‐defined interface area is possible for slurries with viscosities above 3500 mPa s at a casting shear rate of 3.3 s^?1. As it was expected, the choice of de‐bindering and sintering regimes significantly influences crack formation, and a three‐step heating programme was found to result in tapes of the highest quality. The interface regions of green graded tapes were investigated structurally by scanning electron microscopy; for a distinct identification of the interface region and analysing the degree of cross‐interface diffusion, the isothermal entropy change was measured by a vibrating sample magnetometer as the magnetic transition temperature (Curie temperature) is very sensitive to the dopant level in ceramics. Also the purpose of developing this graded ceramic tape casting was applications of these specific magnetocaloric properties within the magnetic refrigeration technology.     

Preoperative sonographic diagnosis of acute appendicitis caused by Ascaris lumbricoides

Acute appendicitis caused by Ascaris lumbricoides is an uncommon variant of a common disease. We describe a case in which sonography was used for preoperative diagnosis of ascaris appendicitis.     

Effect of carbon fiber surface functional groups on the mechanical properties of carbon-carbon composites with HTT

The present investigation describes the quantitative measurement of surface functional groups present on commercially available different PAN based carbon fibers, their effect on the development of interface with resol-type phenol formaldehyde resin matrix and its effect on the physico-mechanical properties of carbon-carbon composites at various stages of heat treatment. An ESCA study of the carbon fibers has revealed that high strength (ST-3) carbon fibers possess almost 10% reactive functional groups as compared to 5.5 and 4.5% in case of intermediate modulus (IM-500) and high modulus (HM-45) carbon fibers, respectively. As a result, ST-3 carbon fibers are in a position to make strong interactions with phenolic resin matrix and HM-45 carbon fibers make weak interactions, while IM-500 carbon fibers make intermediate interactions. This observation is also confirmed from the pyrolysis data (volume shrinkage) of the composites. Bulk density and kerosene density more or less increase in all the composites with heat treatment up to 2600 °C. It is further observed that bulk density is minimum and kerosene density is maximum upon heat treatment at 2600 °C in case of ST-3 based composites compared to HM-45 and IM-500 composites. It has been found for the first time that the deflection temperature (temperature at which the properties of the material start to decrease or increase) of flexural strength as well as interlaminar shear strength is different for the three composites (A, B and C) and is determined by the severity of interactions established at the polymer stage. Above this temperature, flexural strength and interlaminar shear strength increase in all the composites up to 2600 °C. The maximum value of flexural strength at 2600 °C is obtained for HM-45 composites and that of ILSS for ST-3 composites.     

Some problems of the moral and psychological training of medical service personnel

The authors' experience with 45 papillosphincterotomies, performed for diseases of bile passages and chronic pancreatitis, is reported. The details of the operative technic, employed by the authors, are described. The technic of papillosphincterotomy on a conus-shape sound by means of a "laser scalpel" proved to be the most perfect one. Careful observation of the surgical technic made it possible to gain favourable results--only 1 of 45 operated patients died. Papillosphincterotomy is largely advocated in stenoses and concretions in the large duodenal papilla, strictures of choledocho-duodenoanastomoses, care should be taken not to overwiden indications to the operation concerned.     

Studies on bitumen production from North Rumaila crude oil

In the present investigation, the effect of three process variables viz., air rate, temperature and time of oxidation has been studied to determine the possibility of making paving bitumens from North Rumaila Crude Oil. In order to have flexibility in the choice of proper feedstock for bitumen production, the effect of these process parameters was studied on three different vacuum residues. Air rate and temperature of oxidation were optimised to produce a bitumen product having less temperature susceptibility. The composition studies of typical feeds and oxidised products indicate that mainly “saturates” components get converted to “asphaltics” on air blowing.     

A cone-based distributed topology-control algorithm for wireless multi-hop networks

The topology of a wireless multi-hop network can be controlled by varying the transmission power at each node. In this paper, we give a detailed analysis of a cone-based distributed topology-control (CBTC) algorithm. This algorithm does not assume that nodes have GPS information available; rather it depends only on directional information. Roughly speaking, the basic idea of the algorithm is that a node u transmits with the minimum power p/sub u,/spl alpha// required to ensure that in every cone of degree /spl alpha/ around u, there is some node that u can reach with power p/sub u,/spl alpha//. We show that taking /spl alpha/=5/spl pi//6 is a necessary and sufficient condition to guarantee that network connectivity is preserved. More precisely, if there is a path from s to t when every node communicates at maximum power then, if /spl alpha//spl les/5/spl pi//6, there is still a path in the smallest symmetric graph G/sub /spl alpha// containing all edges (u,v) such that u can communicate with v using power p/sub u,/spl alpha//. On the other hand, if /spl alpha/>5/spl pi//6, connectivity is not necessarily preserved. We also propose a set of optimizations that further reduce power consumption and prove that they retain network connectivity. Dynamic reconfiguration in the presence of failures and mobility is also discussed. Simulation results are presented to demonstrate the effectiveness of the algorithm and the optimizations.     

Post spinning modification of PAN fibres — a review

Post spinning modifications play an important role in improving the mechanical properties, density and structure of PAN fibres. Post spinning modifications affect the thermal and kinetic parameters during stabilization and alter the overall stabilization mechanism. The present paper presents a review of the different types of post spinning modifications previously attempted on PAN fibres and the effects of these modifications on the resulting carbon fibres.     

Acidic urine pH is associated with elevated levels of free urinary benzidine and N-acetylbenzidine and urothelial cell DNA adducts in exposed workers

We evaluated the influence of urine pH on the proportion of urinary benzidine (BZ) and N-acetylbenzidine present in the free, unconjugated state and on exfoliated urothelial cell DNA adduct levels in 32 workers exposed to BZ in India. Postworkshift urine pH was inversely correlated with the proportions of BZ (r = -0.78; P < 0.0001) and N-acetylbenzidine (r = -0.67; P < 0.0001) present as free compounds. Furthermore, the average of each subject's pre- and postworkshift urine pH was negatively associated with the predominant urothelial DNA adduct (P = 0.0037, adjusted for urinary BZ and metabolites), which has been shown to cochromatograph with a N-(3'-phosphodeoxyguanosin-8-yl)-N'-acetylbenzidine adduct standard. Controlling for internal dose, individuals with urine pH < 6 had 10-fold higher DNA adduct levels compared to subjects with urine pH > or = 7. As reported previously, polymorphisms in NAT1, NAT2, and GSTM1 had no impact on DNA adduct levels. This is the first study to demonstrate that urine pH has a strong influence on the presence of free urinary aromatic amine compounds and on urothelial cell DNA adduct levels in exposed humans. Because there is evidence that acidic urine has a similar influence on aromatic amines derived from cigarette smoke, urine pH, which is influenced by diet, may be an important susceptibility factor for bladder cancer caused by tobacco in the general population.