PNET “ONDM 2019” special issue

Photonic Network Communications -     

Fire Safety Performance of Japanese Traditional Wood/Soil Walls and Implications for the Restoration of Historic Buildings in Urban Districts

Grass-root research activities to clarify fire safety performance of Japanese traditional wooden construction are introduced. The activities aim to resolve conflict between the restoration of historic buildings and the reduction of risk and hazard of urban fires. Among various activities, scope and results of fire resistance tests on traditional soil wall assemblies supported by timber frame are reported in detail. The test results indicate an encouraging prospect for the rational fire safety assessment of historic buildings and further development of fire-safe traditional constructions for the restoration of historic buildings and historic urban districts.     

Regional allocation of public investment

Conclusion In the previous Sections, we have observed the following interesting properties of the optimum solution to this regional allocation problem.First, as indicated by assumptions (33) (34), and (35), public investment in one of the regions will be justified during some phase of the planning period, even if it is less productive than the private investment in the same region. The reason is that the central government can directly control the interregional flow of public fundsoutside the market mechanism and can concentrate its public investment on the region with greater growth potential.Second, as seen by equation (41), the value of (T–t ^*), the length of the second phase of planning, is independent from the length of planning horizonT provided thatT>T–t ^*. Then, the relative significance of the second phase will be less and less asT becomes larger and larger. This is one of the characteristics which have been observed in the dynamic programming problems with linear form. Therefore, ifT is very large, the public investment should be almost persistently concentrated to the second region, as far as there is no change in the values of relevant parameters.Third, the resultant optimum solution is very sensitive to the relative sizes of such parameters ass _i, _i , _i (i=1, 2), and . Then, if there is some slight change in them by means of social overhead investment, for instance, which was analyzed earlier in this paper, we may observe a drastic change of the optimum solution. Such being the case, it may be possible for us to utilize some combination of those two kinds of public investment policy in order to attain theoptimum optimorum in the set of feasible growth paths.The author is a postdoctoral fellow with the University of Pennsylvania. The present paper is a product of his research on the basic theory of regional growth which has been supported by a grant from the Ford Foundation. This support is gratefully acknowledged. He is indebted to Professors W. Isard, B. H. Stevens, and J. Kissin for their valuable comments on the earlier draft of this paper. Of course, the author alone is responsible for any remaining errors.     

Chain stiffness and chain conformation of poly(α-methylene-γ-butyrolactone) in dilute solutions

The chain stiffness and local chain conformation of atactic poly(α-methylene-γ-butyrolactone) (PMBL), which is a side chain cyclic structural analog of poly(methyl methacrylate) (PMMA), with a weight-average molecular weight (M_w) ranging from 2.8 × 10³ to 2.6 × 10⁶ in N,N-dimethylformamide (DMF) and γ-butyrolactone (GBL) were characterized by size exclusion chromatography with a multi-angle light-scattering detector (SEC-MALS) and synchrotron radiation small-angle X-ray scattering (SAXS). Based on the Kratky-Porod worm-like chain model, the scattering functions and the M_w dependence of z-average root-mean-square radius of gyration <S²>_z^1/2 yielded the Kuhn segment lengths λ⁻¹, the diameter of the PMBL chains d, and the excluded-volume strengths in DMF and GBL. The local conformation of atactic PMBL in DMF and GBL were slightly larger than those of atactic PMMA, due to the presence of the conformationally rigid lactone ring structure.     

Connection‐Strength Estimation of Neuronal Networks by Fitting for Izhikevich Model

Recently, there has been abundant research using multineuron recording, but there are many problems with extracting the features from the obtained spike time series, which are huge in volume and complex. Here we introduce a new method of estimating synaptic connection strengths between neurons by fitting to the Izhikevich model by maximum likelihood estimation. We demonstrate that our method can estimate connection strengths from spike time series given by a simulated neural ensemble and can estimate nonconnectivity between two independent cultured neuronal networks. These results suggest that our method is applicable to network and plasticity analysis of neuronal networks.     

微波场中加热高钛高炉渣的数值模拟

利用微波加热技术在高钛高炉渣内引发裂纹的实验过程中发现炉渣局部区域发生热失控现象.为探寻高钛高炉渣在微波场中产生热失控的原因,使用 FEMAP 和 wave-jω 软件计算了在多模式微波炉中高钛高炉渣及其周围空间内微波场和热三维分布情况,并对比研究了钙钛矿相和普通高炉渣吸收微波的能力.通过计算结果可知几乎所有的微波能都集中在被加热的高钛高炉渣试样中,即微波具有加热高钛渣自身而非周围环境的特点.另外,高钛高炉渣试样中微波场分布不均匀,且分散在炉渣中的钙钛矿相比其他矿物相更易被微波加热.以上 2 因素作用下微波加热高钛高炉渣时局部区域发生热失控现象.     

Integrated reproduction of human motion components by motion copying system

Currently, the development of leading‐edge technology for recording and loading human motion on the basis of haptic information is required in the fields of manufacturing and human support. Human movement is an assembly of motion components. Since human movements should be supported by a robot in real time, it is necessary to integrate the motion components that were saved earlier. Once such motion integration is realized, future technology for use in daily human life can be developed. This paper proposes the integrated reproduction of the decomposed components of human motion by using a motion copying system. This system is the key technology for the realization of the acquisition, saving, and reproduction of real‐world haptic information. By using the proposed method, it is possible not only to achieve expert skill acquisition, skill transfer to robots, and power assist for each motion component, but also to open up new areas of applications. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 181(1): 28–35, 2012; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.21263     

Manufacture of three-layer wood–porcelain stone composite board reinforced with bamboo fiber

The objective of this study was to improve bending strength properties of three-layer wood–porcelain stone composite board. The focus of this study was on the effects of orientations and weight ratios of bamboo fiber in face layer on physical and mechanical properties of the board. Three types of board with different orientation of bamboo fibers in the face layer were manufactured: one in which the fibers were oriented at random orientation (R board), another in which the fibers were oriented at unidirectional orientation (U board), and a third in which the fibers were oriented at cross orientation (C board). The physical and mechanical properties of the boards were evaluated based on the Japanese Industrial Standard for Particleboards. The main results obtained were as follows: Bending strength properties of the board were strongly affected by both orientation and weight ratio of bamboo fibers. Perpendicular specimen of C board has larger bending strength properties than U board and the value become larger with increased weight ratio of bamboo fibers. Internal bond strength value decreased with increasing weight ratio of bamboo fibers. The effect of orientation and weight ratios of bamboo fiber on thickness swelling of the board was not significant.     

Improving the photovoltaic performance of co‐evaporated Cu2ZnSnS4 thin‐film solar cells by incorporation of sodium from NaF layers

We have investigated the influence of sodium (Na) on the properties of co‐evaporated Cu₂ZnSnS₄ (CZTS) layer microstructures and solar cells. The photovoltaic performance and diode properties were improved by incorporating Na from NaF layers into the CZTS layers, while Na had a negligible effect on the microstructural properties of the layer. The best cell fabricated by using an optimal CZTS layer (Cu/(Zn + Sn) = 0.70, Zn/Sn = 1.8) yielded an active area efficiency of 5.23%. The analysis of device properties suggests that charge‐carrier recombination at CZTS/CdS interface is suppressed by intentional Na incorporation from NaF layers. Copyright © 2016 John Wiley & Sons, Ltd.