Calculation of the Characteristics of Salient‐Pole Synchronous Machines Assisted by Permanent Magnets on the Basis of the Operating Principle

In this study we investigate a method for accurately calculating the characteristics of salient‐pole synchronous machines assisted by permanent magnets. First, the operating principle of the machines is investigated by using both finite element analysis and a simple magnetic circuit. Then, a theoretical representation of the assist effect on the permanent magnets is derived based on the magnetic circuit. Finally, the measured and calculated results are compared in order to confirm the validity of the proposed calculation method. We show that the load characteristics of the proposed machine can be accurately estimated from the no‐load and short‐circuit characteristics of the conventional machine without permanent magnets, and the size and magnetization of the inserted permanent magnets.     

Preparation and characterization of sulfonated block‐graft copolyimide/sulfonated polybenzimidazole blend membranes for fuel cell application

Polymer electrolyte blend membranes composed of sulfonated block‐graft polyimide (S‐bg‐PI) and sulfonated polybenzimidazole (sPBI) were prepared and characterized. The proton conductivity and oxygen permeability coefficient of the novel blend membrane S‐bg‐PI/sPBI (7 wt%) were 0.38 S cm^?1 at 90 °C and 98% relative humidity and 7.2 × 10^?13 cm³(STP) cm (cm² s cmHg)^?1 at 35 °C and 76 cmHg, respectively, while those of Nafion^® were 0.15 S cm^?1 and 1.1 × 10^?10 cm³(STP) cm (cm² s cmHg)^?1 under the same conditions. The apparent (proton/oxygen transport) selectivity calculated from the proton conductivity and the oxygen permeability coefficient in the S‐bg‐PI/sPBI (7 wt%) membrane was 300 times larger than that determined in the Nafion membrane. Besides, the excellent gas barrier properties based on an acid ? base interaction in the blend membranes are expected to suppress the generation of hydrogen peroxide and reactive oxygen species, which will degrade fuel cells during operation. The excellent proton conductivity and gas barrier properties of the novel membranes promise their application for future fuel cell membranes. © 2015 Society of Chemical Industry     

Permeability changes in granite with crack growth during immersion in hot water

Permeability tests and observation of induced, as well as inherent, cracks have been carried out to quantitatively explain permeability changes in granite taking place during a weathering test in terms of micro-structure by cracks. To this end, permeability tensors were estimated from observations of crack systems using the Replica Method and of the crack apertures with a scanning electron microscope. The following conclusions were reached: the drastic increase in permeability around an immersion of 1000 d in 90°C water could not be explained by the existence of a percolation threshold because all the specimens were percolative in the sense that the traces of crack tensor were above the critical density for percolation. On the other hand, SEM observation revealed that, with immersion, crack apertures widened and their distribution spread. Permeability estimated using the third (not the first) moment of observed apertures showed the increase in measured permeability well. When evaluating the connectivity parameter λ to give a quantitative accordance between measured and estimated permeability, it had a constant value as low as 0.17, irrespective of the immersion period, in spite of the higher density of micro-cracks than the percolation threshold. It can be said that, in considering the natural three-dimensional crack system, the third moment of physical apertures plays a more important role in predicting the permeability and λ is greatly affected by the spread of crack apertures.     

Combined γ-ray irradiation-activated sludge treatment of humic acid solution from landfill leachate

Humic acid, which is a typical microbially refractory organic substance, was extracted from a landfill leachate. The humic acid solution (COD = 367 mg 1⁻¹; TOC = 293 mg 1⁻¹; BOD = 27 mg 1⁻¹) was applied to a batch scale activated sludge treatment after the modification of its biodegradability by γ-ray irradiation. The BOD increased to 64 mg 1⁻¹ by irradiation of 15 kGy (1.5 Mrad), while the COD and TOC decreased to 231 and 230 mg 1⁻¹, respectively. When the irradiated sample was treated with an activated sludge, the BOD decreased rapidly in 2–3 h to about 15 mg 1⁻¹ which was a similar value as the unirradiated sample was treated. The elimination efficiency of TOC by the sludge treatment was approximately equal to that obtained by irradiation of 15 kGy. These facts suggest a utility of applying microbial processes after radiation treatment of microbially refractory wastewaters.     

Concentration of Antifouling Biocides and Metals in Sediment Core Samples in the Northern Part of Hiroshima Bay

Accumulation of Ot alternative antifoulants in sediment is the focus of this research. Much research had been done on surface sediment, but in this report, the accumulation in the sediment core was studied. The Ot alternative antifoulants, Diuron, Sea-Nine211, and Irgarol 1051, and the latter’s degradation product, M1, were investigated in five samples from the northern part of Hiroshima Bay. Ot compounds (tributyltin (TBT) and triphenyltin (TPT)) were also investigated for comparison. In addition, metal (Pb, Cu, Zn, Fe and Mn) levels and chronology were measured to better understand what happens after accumulation on the sea floor. It was discovered that Ot alternative antifoulant accumulation characteristics in sediment were like Ot compounds, with the concentration in the sediment core being much higher than surface sediment. The concentration in sediment seems to have been affected by the regulation of Ot compounds in 1990, due to the concentration of Ot alternative antifoulants and Ot compounds at the survey point in front of the dock, showing an increase from almost the same layer after the regulation.     

Features of a control blade degradation observed in situ during severe accident conditions in boiling water reactors

In the present paper, new results using in situ video are presented regarding boiling water reactor (BWR) control blade degradation up to 1750 K at the beginning of a nuclear severe accident. Energy-dispersive X-ray spectrometry (EDS) mapping indicated stratification of the absorber blade melt with formation of a chromium and boride-enriched layer. High-content-B- and C-containing material with increased melting temperature acted like a shielding and was found to prevent further relocation of control blade claddings. The interacted layers around the B₄C-granules prevented direct steam attack of residual B₄C. The results provide new insights for understanding of the absorber blade degradation mechanism under reducing conditions specific to Fukushima Dai-Ichi Unit 2 resulting from prolonged steam starvation.     

Plastic behaviours during tempering by crystal plasticity analyses using fast Fourier transform

ABSTRACT

Heat treatment, such as quenching and carburising, often involves volume change caused by phenomena such as thermal expansion, phase transformation, and carbide precipitation during tempering. During the tempering process, an external force induces additional plastic deformation. The authors termed this phenomenon ‘tempering plasticity’. In this study, we performed crystal plasticity analysis using fast Fourier transform considering the volume change in carbides to assess the mechanism of tempering plasticity. As a result, tempering plastic strain occurred as the volume fraction of carbide increased, and the tempering plastic phenomenon could be reproduced based on the transformation model proposed by Greenwood–Johnson. The result supports the idea that the volume change accompanied by carbide precipitation is an important mechanism that invokes tempering plasticity.     

Isolation of antimicrobial agent from the marine algae Cystoseira hakodatensis

Cystoseira hakodatensis is an unutilised brown algae belonging to family Sargassaceae. A crude methanol extract from the algae showed inhibitory effects on the growths of Bacillus cereus and Bacillus licheniformis. To isolate the major antimicrobial agent, a sequential active‐guided isolation procedure was applied: liquid–liquid extraction, column chromatography and bio‐autography. A marked antimicrobial agent (active α) was isolated in hydrophobic fraction and was determined to phenolics without carbohydrates and proteins by phytochemical test. Regarding the antimicrobial potential, the isolated active α showed better inhibitory effects against B. cereus and B. licheniformis at 2 and 4 times of lower concentrations (62.5 and 31.3 μg mL^?1) in comparison with epigallocatechin gallate. These results showed that C. hakodatensis is a potential source of antimicrobial agent capable of preventing the growth of the two bacteria.     

Traversable Region Estimation for Mobile Robots in an Outdoor Image

This paper describes a novel method to estimate appropriate traversable regions from an outdoor scene image. The traversable regions output by the proposed method reflect the common sense of people. For example, a candidate traversable region is “a paved road somewhat distant from the side ditch.” The input to the traversable region estimation is one color image. First, category is assigned to each pixel in the image. The categorization result is then input to the region estimator. Finally, the traversable region are estimated on the input image. An important aspect of this method is the application of two score functions in region estimation process. One score function places high value on categories selected as traversable paths by subjects. The other function places high value on categories that are not selected as traversable regions but are adjacent to categories with traversable paths. A combination of these two functions produces feasible estimation results. The effectiveness of the combined score functions was evaluated by experiments and a questionnaire.