Volatilization of fluorine in a CaO–SiO2–CaF2-based system with the substitution of Na2O with K2O

Cuspidine-based systems are used to control the crystallization in mold fluxes, which is enabled by CaF₂ additions. However, excess CaF₂ increases the corrosion of casting machines. Therefore, Na₂O and K₂O are added to the mold flux system to ensure an optimized crystallization and lubrication ability of the flux with the CaF₂ content. This study investigated the effect of substituting Na₂O with K₂O on the volatilization of fluorine in a CaO–SiO₂–CaF₂-based slag system at high temperatures. The substitution of Na₂O with K₂O was performed at 5 mol% intervals. The volatilization was observed by thermogravimetric analysis under several isothermal conditions. The mass loss was measured at a heating rate of 5, 10, and 20 K/min. As the temperature increased, the volatilization of the mixed samples increased. The activation energy was calculated using the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods. A kinetic analysis of the volatilization of fluorine was conducted using the calculated parameters and several known kinetic models. Consequently, the volatilization of the Na-rich sample was controlled by chemical reactions and that of the K-rich sample was identified to be controlled by a phase-boundary-controlled reaction. These results suggest that the addition of mixed alkali oxide promote the volatilization during the early stages of the reaction. From the post-experimental composition analyses, the remaining Na and K in the samples suggested a different mechanism for the Na and K volatilization. The volatilization of Na increased with time, whereas K volatilized easily during the beginning of the reaction.     

Borage Oil Enhances Lamellar Body Content and Alters Fatty Acid Composition of Epidermal Ceramides in Essential Fatty Acid-Deficient Guinea Pigs

Borage oil [BO: 40.9% linoleic acid (LNA) and 24.0% γ-linolenic acid (GLA)] reverses disrupted epidermal lipid barrier in essential fatty acid deficiency (EFAD). We determined the effects of BO on lamellar body (LB) content and LNA and GLA incorporation into epidermal ceramide 1 (CER1) and epidermal ceramide 2 (CER2), major barrier lipids. EFAD was induced in guinea pigs by a diet of 6% hydrogenated coconut oil (HCO) for 10 weeks (group HCO) or 8 weeks followed by 6% BO for 2 weeks (group HCO + BO). LB content and LNA and GLA incorporation into CER1 were higher in group HCO + BO than in group HCO. Small but significant levels of LNA, GLA, and their C20-metabolized fatty acids [dihomo-γ-linolenic acid (DGLA) and arachidonic acid (ARA)] were incorporated into CER2, where ARA was detected at a level lower than LNA, but DGLA incorporation exceeded that for GLA in group HCO + BO. Dietary BO enhanced LB content and differential incorporation of GLA into CER1 and DGLA into CER2.     

Toxoplasma gondii GRA9 Regulates the Activation of NLRP3 Inflammasome to Exert Anti-Septic Effects in Mice

Dense granule proteins (GRAs) are essential components in Toxoplasma gondii, which are suggested to be promising serodiagnostic markers in toxoplasmosis. In this study, we investigated the function of GRA9 in host response and the associated regulatory mechanism, which were unknown. We found that GRA9 interacts with NLR family pyrin domain containing 3 (NLRP3) involved in inflammation by forming the NLRP3 inflammasome. The C-terminal of GRA9 (GRA9C) is essential for GRA9–NLRP3 interaction by disrupting the NLRP3 inflammasome through blocking the binding of apoptotic speck-containing (ASC)-NLRP3. Notably, Q200 of GRA9C is essential for the interaction of NLRP3 and blocking the conjugation of ASC. Recombinant GRA9C (rGRA9C) showed an anti-inflammatory effect and the elimination of bacteria by converting M1 to M2 macrophages. In vivo, rGRA9C increased the anti-inflammatory and bactericidal effects and subsequent anti-septic activity in CLP- and E. coli- or P. aeruginosa-induced sepsis model mice by increasing M2 polarization. Taken together, our findings defined a role of T. gondii GRA9 associated with NLRP3 in host macrophages, suggesting its potential as a new candidate therapeutic agent for sepsis.     

A novel spectrum sensing scheme with sensing time optimization for energy-efficient CRSNs

Wireless Networks - The cognitive radio technology enables secondary users (SUs) to occupy licensed bands when primary users (PUs) are not occupy them. Spectrum sensing is a key technology for SUs...     

Early-warning performance monitoring system (EPMS) using the business information of a project

An early-warning performance monitoring system (EPMS) is proposed to objectively measure and monitor the performance of a project for early detection of inherent poor performance problems. The EPMS is built based on project progress data and consists of a database of business information, an optimized theoretical model used as a performance measurement baseline, and an index for monitoring and forecasting the performance. By monitoring the performance through an application of the EPMS to the Korean construction project, the quarterly variation of index was found to differ by project type. These results could explain the environmental changes in the project execution. Therefore, the EPMS is expected to be an alternative for objective performance monitoring and forecasting while applying the existing methods is difficult because of the limited available data on performance indicators. The development procedures may also be useful to researchers interested in approaches to quantitatively analyze trends in various industries.     

Simultaneous determination of synthetic food additives in kimchi by liquid chromatography-electrospray tandem mass spectrometry

Food Science and Biotechnology - A new analytical method was developed for the simultaneous determination of seven food additives (Ponceau 4R, Allura Red AC, Amaranth, 4-hydroxymethyl benzoic acid,...     

A Polyallylamine Anchored Amine‐Rich Laser‐Ablated Graphene Platform for Facile and Highly Selective Electrochemical IgG Biomarker Detection

Current immunosensors have an insufficient number of binding sites for the recognition of biomolecules, which leads to false positive or negative results. In this research, a facile, cost‐effective, disposable, and highly selective electrochemical immunosensing platform is developed based on cationic polyelectrolyte polyallylamine (PAAMI) anchored laser‐ablated graphene (LAG). Here, for the first time, PAAMI is introduced to stabilize LAG flakes, while retaining the intrinsic thermal and electronic properties of the substrate by noncovalent π–π interaction and electrostatic physical absorption. The sensing platform offers a suitable number of anchoring sites for the immobilized antibodies by providing ? NH₂ functional groups. The proper grafting of PAAMI is confirmed through X‐ray photoelectron spectroscopy and Raman spectroscopy. The immunosensing platform is applied to detect immunoglobulin (IgG) biomarkers as a proof of concept. Under optimized conditions, the sensing platform exhibits a linear range of 0.012–15 and 15–352 ng mL^?1 with a limit of detection of 6 pg mL^?1 for IgG detection with high selectivity. Based on the analysis, the developed immunosensing platform can be used for point‐of‐care detection of IgG in clinical diagnostic centers. Furthermore, the developed strategy is well suited for the detection of other cancer biomarkers after immobilizing the relevant antibodies.     

Automatic Transformation of Membrane‐Type Electronic Devices into Complex 3D Structures via Extrusion Shear Printing and Thermal Relaxation of Acrylonitrile–Butadiene–Styrene Frameworks

This work demonstrates a means of automatic transformation from planar electronic devices to desirable 3D forms. The method uses a spatially designed thermoplastic framework created via extrusion shear printing of acrylonitrile–butadiene–styrene (ABS) on a stress‐free ABS film, which can be laminated to a membrane‐type electronic device layer. Thermal annealing above the glass transition temperature allows stress relaxation in the printed polymer chains, resulting in an overall shape transformation of the framework. In addition, the significant reduction in the Young's modulus and the ability of the polymer chains to reflow in the rubbery state release the stress concentration in the electronic device layer, which can be positioned outside the neutral mechanical plane. Electrical analyses and mechanical simulations of a membrane‐type Au electrode and indium gallium zinc oxide transistor arrays before and after transformation confirm the versatility of this method for developing 3D electronic devices based on planar forms.     

Determination on environmental factors and growth factors affecting tomato yield using pattern recognition techniques

Multimedia Tools and Applications - In the area of smart farming, a big data is being created using information and communication technologies such as the Internet of Things and Cloud computing....