Tuning of shear thickening behavior and elastic strength of polyvinylidene fluoride via doping of ZnO-graphene

ZnO rice like nonarchitects are grafted on the graphene carbon core via a rapid microwave synthesis route. The prepared grafted systems are characterized via XRD, SEM, RAMAN, and XPS to examined the structural and morphological parameters. Zinc oxide grafted graphene sheets (ZnO-G) are further doped in β-phase of polyvinylidene fluoride (PVDF) to prepare the polymer nanocomposites (PNCs) via mixed solvent approach (THF/DMF). β-phase confirmation of PVDF PNCs is done by FTIR studies. It is observed that ZnO-G filler enhances the β-phase content in the PNCs. Non-doped PVDF and PNCs are further studied for rheological behavior under the shear rate of 1–100 s⁻¹. Doping of ZnO-G dopant to the PVDF matrix changes its discontinuous shear thickening (DST) behavior to continues shear thickening behavior (CST). Hydrocluster formation and their interaction with the dopant could be the reason for this striking DST to CST behavioral change. Strain amplitude sweep (10⁻³% -10%) oscillatory test reveals that the PNCs shows extended linear viscoelastic region with high elastic modulus and lower viscous modulus. Effective shear thickening behavior and strong elastic strength of these PNCs present their candidature for various fields including mechanical and soft body armor applications.     

Bioceramic composites for orthopaedic applications: A comprehensive review of mechanical,biological, and microstructural properties

Bioceramics have been widely utilized for orthopaedic applications in which the biocompatibility and mechanical properties of the materials are vital characteristics to be considered for their clinical use. Till date, extensive studies have been devoted to developing a range of scientific ways for tailoring the microstructure of bioceramics in order to attain the trade-off of mechanical properties and biocompatibility of the final product. Owing to low reactivity, earlier stabilization and longer functional life of bioceramic, the developed implants are capable of replicating the mechanical behaviour of original bone. As the safety of the patient and its ultimate functionality are the ultimate goal of the selected implant material hence, the present literature survey investigates and brings forth the important aspects associated to the mechanical, biological and microstructural characteristics of bioceramics employed in orthopaedic applications. The review paper majorly focuses on effective utilization of various materials as an additive in bioceramics and processing techniques used for enhancement of properties, enabling the use of material in orthopaedic applications. The influence of various additives on the microstructure, mechanical properties and biological performance of developed bioceramics orthopaedic implants has been elaborately discussed. Furthermore, future prospects are proposed to promote further innovations in bioceramics research.     

First-Principles Investigation of Electronic Properties of GaAsxSb1 –x Ternary Alloys

Semiconductors - Compositional variations in GaAs based ternary alloys have exhibited wide range alterations in electronic properties. In the present paper, first-principles study of...     

Flower‐shaped ultra‐wideband fractal antenna

A flower‐shaped ultra‐wideband fractal antenna is presented. It comprises a fourth iterative flower‐shaped radiator, asymmetrical stub‐loaded feeding line, and coplanar quarter elliptical ground planes. A wide operating band of 12.12 GHz (4.58‐16.7 GHz) for S ₁₁ ≤ ? 10 dB is achieved along with an overall antenna footprint of 15.7 × 11.4 mm². In addition, other desirable characteristics, that is, omnidirectional radiation patterns, peak gain upto 5 dB, and fidelity factor more than 75% are achieved. A good agreement exists between the simulation and measured results. The obtained results illustrate that this antenna has wide operating range and compact dimensions than available structures.     

Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Ag2O–Al2O3–ZrO2 Trimetallic Nanocatalyst for High Performance Photodegradation of Nicosulfuron Herbicide

Topics in Catalysis - In the present study, Ag2O–Al2O3–ZrO2 based trimetallic oxide nanocatalyst was designed using simple microwave assisted reduction method. It was characterized...     

Development of docetaxel nanocapsules for improving in vitro cytotoxicity and cellular uptake in MCF-7 cells

The aim of this study was to fabricate docetaxel loaded nanocapsules (DTX-NCs) with a high payload using Layer-by-Layer (LbL) technique by successive coating with alternate layers of oppositely charged polyelectrolytes. Developed nanocapsules (NCs) were characterized in terms of morphology, particle size distribution, zeta potential (ζ-potential), entrapment efficiency and in vitro release. The morphological characteristics of the NCs were assessed using transmission electron microscopy (TEM) that revealed coating of polyelectrolytes around the surface of particles. The developed NCs successfully attained a submicron particle size while the ζ-potential of optimized NCs alternated between (+) 34.64?±?1.5 mV to (?) 33.25?±?2.1 mV with each coating step. The non-hemolytic potential of the NCs indicated the suitability of the developed formulation for intravenous administration. A comparative study indicated that the cytotoxicity of positively charged NCs (F4) was significant higher (p?in vitro on MCF-7 cells. Furthermore, cell uptake studies evidenced a higher uptake of positive NCs (≥1.2 fold) in comparison to negative NCs. In conclusion, formulated NCs are an ideal vehicle for passive targeting of drugs to tumor cells that may result in improved efficacy and reduced toxicity of encapsulated drug moiety.     

Detailed study on fusion characteristics of rigid poly(vinyl chloride) nanocomposites: The comparison of using multiple regression analysis and artificial neural network

Fusion behavior of poly(vinyl chloride) (PVC) compounds plays an important role in the development of physical properties of processed material. The fusion characteristics in PVC processing are governed by material variables that affect the fusion with some interactions. In this research, the aim was to characterize the effects of formulation ingredients on fusion characteristics of PVC. Four material parameters, including the contents of nanoclay (NC), azodicarbonamide, calcium stearate, and processing aid, are proposed as affecting variables. The fusion time (FT) as well as fusion factor (FF) are considered fusion indicators and are experimentally determined in some different levels of affecting parameters. The multivariable regression analysis (MRA) and the Artificial Neural Network (ANN) modeling are considered as two analytical methods. The regression analysis result for the FT denotes, in part, significant linear and quadratic effects of NC and also its significant interactions with azodicarbonamide and calcium stearate, whereas that of FF indicates only a linear effect of NC. ANN modeling is performed with a three‐layer (input, hidden, and output) neural network. The results of the comparison of the MRA and ANN predictions with experimental values are reported as the correlation coefficient (R²), mean‐square error, and mean absolute percentage error for both FF and FT parameters. The obtained values clearly denote that the ANN results are more precise and especially more general than those of MRA. However, in the case of FT, improvement of the ANN modeling is much greater than that of FF. J. VINYL ADDIT. TECHNOL., 21:147–155, 2015. © 2014 Society of Plastics Engineers