Inspection and Monitoring of Concrete Structures via Radiography and Weighted Nuclear Norm Minimization Method

Russian Journal of Nondestructive Testing - The location of reinforcement bar in concrete, the bar corrosion, diameter and the depth below the surface are important factors in the evaluation of the...     

Mathematical Behavior of Optical Density of γ-Ray Radiography Images of Steel Pipes

Russian Journal of Nondestructive Testing - The purpose of this article is to determine the mathematical function of the optical behavior of radiographic films/images produced by gamma-ray...     

Roll bonding of AA5052 and polypropylene sheets: Bonding mechanisms,microstructure and mechanical properties

Structural, microstructural and mechanical properties in roll bonding of AA5052 and polypropylene sheets have been evaluated in this study. The surface roughness of the AA5052 sheets, rolling temperature and the surface energy of polymer were selected as the bonding variables. The findings indicated that an increase in the surface energy of polypropylene by grafting maleic anhydride would result in higher bonding strength due to chemical interaction between the AA5052 and the maleic anhydride grafted polypropylene (PP-g-MAH). In fact, this reaction caused the formation of an interphase layer at the polymer side of the interface and the diffusion of aluminum into the PP-g-MAH layer. It was also observed that an increase in the rolling temperature increases bonding strength because the polymer penetrates the AA5052 surface irregularities more easily, the PP-g-MAH molecules move more smoothly toward the AA5052 surface, and finally there are more chemical interactions among the layers. An Increase in the bonding strength through increasing the AA5052 surface roughness was attributed to an increase of the van der Waals force and more interaction surface among the layers along with higher mechanical interlocking in the shear tension test.     

Extended Algorithms for Approximating Variable Order Fractional Derivatives with Applications

This paper proposes accurate and robust algorithms for approximating variable order fractional derivatives of arbitrary order. The proposed schemes are based on finite difference approximations. We compare the performance of algorithms by introducing a new formulation of experimental convergence order. Two initial value problems are considered and solved by means of the proposed methods. Numerical results are provided justifying the usefulness of the proposed methods.     

Modeling managerial behavior in real options valuation for project-based environments

Project valuation, as a decision-making tool for initiating investments in projects, should be able to value project flexibilities and incorporate reasonable risk preferences of relevant decision makers. Real options valuation methods are the available approaches for valuing project flexibilities, whereas they have shortcomings in considering managers’ reasonable risk preferences in project decisions. Therefore, researchers have suggested approximating the perspective on risk of real options methods and practitioners in project management. This study proposes a fair real options valuation for project-based environments by a behavioral economic approach, which adopts binomial lattice method, Monte-Carlo simulation, and cumulative prospect theory. The results show that behavioral factors such as ‘risk attitude’ and ‘loss aversion’ should be accepted in project investment decisions while limited to an acceptable amount depending on the project conditions (e.g. uniqueness of decision-making scenarios). This research contributes to the project management domain by enhancing project investment decisions that include project flexibilities.     

Dipyridamole recognition and controlled release by uniformly sized molecularly imprinted nanospheres

We used novel synthetic conditions of precipitation polymerization to obtain uniformly sized molecularly imprinted nanospheres of dipyridamole for application in the design of new drug delivery systems. In addition, the morphology, drug release, and binding properties of molecularly imprinted polymers (MIPs) were studied, and the effects of morphology on other properties were investigated. The MIPs prepared by acetonitrile/chloroform (19:1, v/v) were uniformly sized nanospheres with an average mean diameter of approximately 88 nm at a wetted state, 50 nm at a dry state, and a polydispersity index of 0.062. The imprinted nanospheres showed excellent binding properties and had 62.7% of template binding compared with 17.1% of its blank polymer. The imprinted nanospheres with 67.5 (mg template/of polymer) of binding capacity had better imprinting efficiency than the 50.5% of binding capacity shown by irregularly shaped MIP particles that were prepared by chloroform. The molecular binding abilities of imprinted nanospheres in human serum were evaluated by HPLC analysis (binding about 77% of dipyridamole). Results from release experiments of MIPs showed a very slow, controlled, and satisfactory release of dipyridamole. The loaded drug was released up to 99% in 17 days for nanospheres and 22 days for irregularly shaped particles.     

Immobilization of Metalloporphyrin on Functionalized MCM-48 Nanoporous Silica as a Catalyst in Oxidation of Cyclohexene: The Effects of Nanoporous Structure of MCM-48 on Its Catalytic Efficiency

MCM-48 nanoporous silica were prepared by the sol–gel method and functionalized by pyridine using a silane agent. With the aid of pyridines on the surface, the nanoporous material was used as a support for immobilization of metalloporphyrin. The formation of this material was confirmed by infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, inductively coupled plasma atomic emission spectroscopy analysis and specific surface area measurement. The application of this metalloporphyrin-immobilized MCM-48 was investigated as a heterogeneous catalyst in cyclohexene oxidation. Various parameters such as solvent and time were optimized. Also the effect of nanoporous structure on the efficiency of the catalyst was investigated by comparing the results with the same composite using nonporous silica (SiO₂). The result showed that the MCM-48 immobilized metalloporphyrin is a better catalyst for cyclohexene oxidation, which can be attributed to its nanoporous structure. The nanoporous structure increases the surface area of MCM-48 and leads to more metalloporphyrin immobilization.     

Defensive role ofAllium sulfur compounds for leek mothAcrolepiopsis assectella Z. (Lepidoptera) against generalist predators

It has been shown previously that sulfur volatiles produced byAllium plants affect the behavior of their specialist phytophages and of their specialist entomophages. The action of these compounds in protecting the leek mothAcrolepiopsis assectella against generalist entomophages was studied in comparison to the proposed original defensive role of these compounds against generalist herbivorous insects. Two ants species,Formica selysi andF. fusca, were used as generalist predators. Six behavioral criteria of the predatory behavior of the ants were studied in presence of the last-instar caterpillars (C₅). C₅ reared on artificial diets with or without leek components were tested, as well as C₅ soaked in frass of leek-reared caterpillars or disulfide solutions. In addition, the response of the ants to pure chemicals found in leek was studied using honey solutions with or without sulfur compounds. The sulfur allelochemicals ofAllium plants have a negative action on predatory ants. Interestingly, the nonvolatile precursors of sulfur volatiles ofAllium plants seem to have a protective role for their phytophagous insects against generalist entomophages.     

Vulnerability assessment of irregular steel structures under traveling fires

This paper investigates the response of tall setback irregular steel moment resisting structures under traveling fires. A seven‐story steel regular structure (RS) is first designed for gravity and seismic loads and then it is fireproofed for a fire resistance rating (FRR) of 120 min based on the ISO834 fire. Some architectural changes are then imposed on the RS to make it a setback irregular structure (SBS). Based on the traveling fire methodology, both structures are then subjected to fire curves ranging from 1% to 100% for the fire load density (q_f) of 570 MJ/m². As in the SBS, the distribution of gravity loads is not uniform; the structural fire analyses are performed twice: when the fires start from left to right and then vice versa. The results show the FRR of the RS is minimized under the fire size of 22% with the collapse time of 87.0 min. In the SBS, when the fires start from left to right and then from right to left, the FRR is minimized under the fire size of 20% with the collapse times of 75.0 and 79.0 min, respectively. This shows that the SBS is more vulnerable toward traveling fires than the RS. In order to monitor the role of q_f in the FRRs of the structures, q_f is then reduced, and the required analyses are repeated. This process continues to where no collapse is observed under all the fire sizes. The results indicate that the RS would remain stable if the q_f is decreased to 480 MJ/m², implying that a 16% increase should be considered to the required FRR. As for the SBS, the q_f should be decreased to 440 MJ/m² to make it stable, meaning that a 25% increase should be considered to the required FRR.