Study on induced work-function variation of titanium metal gate on various electrical parameters for delta-doped layer germanium source vertical tunnel FET

Journal of Computational Electronics - Workfunction variation (WFV) in a high-k/titanium metal gate stack vertical tunnel field-effect transistor (FET) with a delta-doped layer in the germanium...     

On processing of Ni-WC based functionally graded composite clads through microwave heating

Present study focuses on the development of four layered functionally graded clads (FGC) of Ni-WC based composite material on AISI 304 substrate through microwave heating route. Experimental trials were conducted inside a microwave applicator of domestic type at frequency range of 2.45?GHz. The optimal exposure time of 900?W microwave power was varied with compositional gradient and it was from 300 to 360?s. The mechanism of FGC formation through microwave heating was explained and developed FGC was subjected to mechanical and microstructure characterizations. The results of micro-structural analysis revealed that the FGC of ～1.8?mm thickness was produced and was free from any type of interfacial cracks and visible porosity. It was observed that WC particles were randomly dispersed in the nickel matrix. XRD study revealed the formation of inter-metallics, such as NiW₄, NiSi, and Cr₂₃C₆. Maximum value of microhardness was observed in the top FGC layer and was 880?±?30?HV.     

Source-Drain Junction Engineering Schottky Barrier MOSFETs and their Mixed Mode Application

Silicon - In this paper, a new structure for a silicon on insulator Schottky barrier MOSFET (SOI SB-MOSFET) has been proposed. The simulated device is calibrated with experimental result. Here...     

Effect of Temperature on Reliability Issues of Ferroelectric Dopant Segregated Schottky Barrier Tunnel Field Effect Transistor (Fe DS-SBTFET)

This paper addresses reliability issues associated with temperature of Ferroelectric Dopant Segregated Schottky Barrier Tunnel Field Effect Transistor (Fe DS-SBTFET). The simulated results are compared with Dopant Segregated Schottky Barrier TFET (DS-SBTFET). This is achieved by varying the operating temperature from 300 to 500 K. DC parameters such as I_ON/I_OFF ratio, drain current characteristics and subthreshold swing (SS) for a range of temperature have been highlighted. Moreover, the influence of temperature on various RF figure of merits such as gate capacitance (C_GG), intrinsic delay, cutoff frequency (f_T) etc. have been investigated. The device linearity has been analyzed by considering the effect of temperature variation on linearity parameters like g_m2, g_m3, 1-dB compression point, VIP₂, VIP₃ and IIP₃. The device characteristics get upgraded by the increase in cut-off frequency and reduction in intrinsic delay at elevated temperature.

     

TFET on Selective Buried Oxide (SELBOX) Substrate with Improved ION/IOFF Ratio and Reduced Ambipolar Current

Silicon - This paper proposes a new structure for tunnel field effect transistor on a selective buried oxide (SELBOX) substrate. An extensive simulation study and a comparative performance analysis...     

Impact of Mole Fractions due to Work Function Variability (WFV) of Metal Gate on Electrical Parameters in Strained SOI-FinFET

In the recent sub-20 nm technology node, the process variability issues have become a major problem for scaling of MOS devices. We present a design for a strained Si/SiGe FinFET on an insulator using a 3D TCAD simulator. The impact of metal gate work function variability (WFV) on electrical parameters is studied. Such impact of WFV for different mole fractions (x) of the SiGe layer in a strained SOI-FinFET with varying grain size is presented. The results show that as the mole fraction is increased, the variability in threshold voltage (σVT) and off current (σIoff) is decreased; while, the variability of on-current (σIon) is increased. A notable observation is the distribution of electrical parameters approaches a normal distribution for smaller grain sizes.     

Robust vectorization method for electrical circuit drawings using component morphology

Pattern Analysis and Applications - Decomposition and representation of electrical circuit drawings to a suitable vector form has widespread applications related to data compression, storage,...     

High-temperature degradation of butadiene-based model elastomers by reactive molecular dynamics simulation

Thermal degradation of butadiene-based model elastomers was analyzed via a novel reactive molecular dynamics simulation (ReaxFF) method. The molecular simulation was carried out on 40 monomer units connected together. Degradation pathways of both homopolymer and copolymer of butadiene-based model elastomers such as polybutadiene (BR) and poly (styrene-co-butadiene) (SBR) were studied. The evolution of different fragmented products was examined as a function of time and heating rate. The formation mechanisms of different degraded fragments were visualized via the simulation method. The major decomposition products obtained from these model compounds were the monomers and comonomers. Pyrolysis gas chromatography–mass spectrometry (py-GC–MS) analysis was performed on the commercial samples of BR and SBR to verify the simulation results. The results obtained from the reactive simulation were very consistent with the experimental results. The activation energy required for the thermal decomposition of butadiene-based model elastomers were calculated both from the ReaxFF simulation and thermogravimetric analysis (TGA). The results were also in good agreement. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48592.     

Biocompatible composites of fibrous nanohydroxyapatite embedded in a polydimethylsiloxane

Silicone elastomers have the potential to be a valuable biomaterial due to their mechanical and chemical properties, easy processing, and high gas permeability. Some inherent properties of the pure silicone implant such as high hydrophobicity and low load bearing capacity can be problematic for biomedical applications. The issues were addressed by fabricating hydroxyapatite nanofiber/polydimethylsiloxane nanocomposites. The morphology of nanocomposite structures was visualized by high resolution transmission electron microscopy and field emission scanning electron microscopy. Improved mechanical strength and compliance of the prepared nanocomposite structures were obtained by frequency sweep and creep measurements. Surface hydrophilicity of polydimethylsiloxane was enhanced by hydroxyapatite nanofiber incorporation into the polymer matrix. The cytotoxicity and biocompatibility of the structures were analyzed using breast epithelial cells (MDA MB 231 cell line). These studies showed that the nanocomposite scaffold did not leach any cytotoxic material and showed better cell adhesion and cell proliferation compared to the unfilled elastomer.