Continuous physical activity recognition for intelligent labour monitoring

Multimedia Tools and Applications - The paper addresses the problem of human activity recognition based on the data from wearable sensors. Human activity recognition depends on a wide context of...     

Bolted large seismic steel beam-to-column connections Part 1: experimental study

Two large bolted steel moment-resisting connections were studied by experiments. These connections were single-sided beam-to-column assemblies that are representative of exterior beam-to-column connections, and they were composed of W36×150 Grade 50 beams and W14×283 Grade 50 columns. T-stubs were cut from W40×264 sections of Grade 50 steel. The T-stub stems were welded to the beams and prestressed by bolts to the beam flanges in the shop. Final beam-to-column assembly required no additional welding: the T-stub flanges were bolted to the column and the column shear tab was bolted to the beam web. The specimens had two symmetrically located T-stubs with different stem geometry: Specimen 1 had rectangular-shaped stems, whereas Specimen 2 had U-shaped stems. During the cyclic testing the beam deformation was minimal controlled by active participation of the T-stub flanges: a separation between T-stub flanges and the column flanges was observed. This separation was caused by bending plastic deformation in the T-stub flanges and plastic deformation in the high-strength bolts. This phenomenon allowed energy dissipation and prevented severe buckling of the beam flanges and beam web.     

Recent research on eccentrically braced frames

Recent research developments on eccentrically braced steel frames for seismic design are reviewed. The emphasis is placed on the design of links, which are short sections of beams between columns and braces, and similar elements at eccentric joints. The review includes some highlights of the latest experiments with one-third scale models employing different eccentric bracing schemes, an updated classification of links, and special design requirements for different types of links. Some results are given on recent cyclic tests of full-size links.     

Hydrothermal microwave-assisted synthesis of LaFeO3 catalyst for N2O decomposition

Lanthanum orthoferrite powders were synthesized via one-step hydrothermal reactions under mild conditions using microwave and conventional heating. The use of microwave irradiation during the synthesis allows one to obtain nanocrystalline LaFeO₃ with a higher yield and reduced crystallite and particle size within a 16 times shorter duration (3 hours) at a lower temperature of 220°C as compared to the conventional heating. The catalytic decomposition of nitrous oxide was performed over both samples, it was shown that the sample obtained under microwave conditions demonstrates enhanced activity as a catalyst: N₂O decomposes completely at 700°C over the catalyst formed at microwave conditions, while the comparative catalyst prepared by conventional heating reaches a lower conversion of only 60% at the same temperature and catalytic reaction conditions.     

Monitoring the curing processes of epoxy oligomers with partially substituted polyethoxymetallosiloxanes by IR spectroscopy and thermomechanical analysis

In this work, the curing of «ED-20» epoxy resin with partially siloxy-substituted aluminum, iron, and zirconium siloxanes that we obtained previously was studied. The initial content of a metallosiloxane in the compositions was 5–50 wt% with respect to the resin. In all the cases, thermal curing was used to obtain a series of samples in the form of solid homogeneous materials. The fact of the epoxy ring opening in the resin was confirmed by IR spectroscopy. The catalytic properties of the metal atom in a metallosiloxane were found to affect the curing process. The samples demonstrate rather a high resistance to thermooxidative destruction, and in most cases, their glass transition temperatures are lower than those obtained upon standard curing of «ED-20» resin with triethylenetetramine. Partially siloxy-substituted metalloalkoxysiloxanes can be efficient agents for curing and formation of a hybrid material based on epoxy resins.     

ATP-Independent Initiation during Cap-Independent Translation of m6A-Modified mRNA

The methylation of adenosine in the N⁶ position (m⁶A) is a widely used modification of eukaryotic mRNAs. Its importance for the regulation of mRNA translation was put forward recently, essentially due to the ability of methylated mRNA to be translated in conditions of inhibited cap-dependent translation initiation, e.g., under stress. However, the peculiarities of translation initiation on m⁶A-modified mRNAs are not fully known. In this study, we used toeprinting and translation in a cell-free system to confirm that m⁶A-modified mRNAs can be translated in conditions of suppressed cap-dependent translation. We show for the first time that m⁶A-modified mRNAs display not only decreased elongation, but also a lower efficiency of translation initiation. Additionally, we report relative resistance of m⁶A-mRNA translation initiation in the absence of ATP and inhibited eIF4A activity. Our novel findings indicate that the scanning of m⁶A-modified leader sequences is performed by a noncanonical mechanism.     

bOptimizing atomic force microscopy for characterization of diamond-protein interfaces

Atomic force microscopy (AFM) in contact mode and tapping mode is employed for high resolution studies of soft organic molecules (fetal bovine serum proteins) on hard inorganic diamond substrates in solution and air. Various effects in morphology and phase measurements related to the cantilever spring constant, amplitude of tip oscillations, surface approach, tip shape and condition are demonstrated and discussed based on the proposed schematic models. We show that both diamond and proteins can be mechanically modified by Si AFM cantilever. We propose how to choose suitable cantilever type, optimize scanning parameters, recognize and minimize various artifacts, and obtain reliable AFM data both in solution and in air to reveal microscopic characteristics of protein-diamond interfaces. We also suggest that monocrystalline diamond is well defined substrate that can be applicable for fundamental studies of molecules on surfaces in general.     

Plain concrete as a composite material

The purpose of this paper is to study the consequences of the composite nature of concrete. A plausible energy balance equation is postulated and the Green-Rivlin invariance principle is applied to it to derive the linear and angular momentum balance laws. General constitutive equations are discussed with the aid of thermodynamic potentials and Coleman's method. The distribution of the applied stresses between mortar and aggregate is also studied in detail, showing for instance that substantial tensile lateral stresses may appear in mortar under uniaxial compressive loading. These results are used to derive a criterion for the onset of inelasticity in concrete.     

Ultrasoft Liquid Metal Elastomer Foams with Positive and Negative Piezopermittivity for Tactile Sensing

Soft, capacitive tactile (pressure) sensors are important for applications including human–machine interfaces, soft robots, and electronic skins. Such capacitors consist of two electrodes separated by a soft dielectric. Pressing the capacitor brings the electrodes closer together and thereby increases capacitance. Thus, sensitivity to a given force is maximized by using dielectric materials that are soft and have a high dielectric constant, yet such properties are often in conflict with each other. Here, a liquid metal elastomer foam (LMEF) is introduced that is extremely soft (elastic modulus 7.8 kPa), highly compressible (70% strain), and has a high permittivity. Compressing the LMEF displaces the air in the foam structure, increasing the permittivity over a large range (5.6–11.7). This is called “positive piezopermittivity.” Interestingly, it is discovered that the permittivity of such materials decreases (“negative piezopermittivity”) when compressed to large strain due to the geometric deformation of the liquid metal droplets. This mechanism is theoretically confirmed via electromagnetic theory, and finite element simulation. Using these materials, a soft tactile sensor with high sensitivity, high initial capacitance, and large capacitance change is demonstrated. In addition, a tactile sensor powered wirelessly (from 3 m away) with high power conversion efficiency (84%) is demonstrated.     

Single Au Atoms on the Surface of N-Free and N-Doped Carbon: Interaction with Formic Acid and Methanol Molecules

Topics in Catalysis - Formic acid and methanol are considered as liquid organic hydrogen carriers and could be produced sustainably from biomass or by CO2 hydrogenation using catalysts. The choice...