Distributed Control Strategy with Smith's Predictor in a Pilot-Scale Diabatic Distillation Unit

Intrinsic characteristics of distillation such as dead time and high nonlinearities do not allow the complete elimination of transient times when any external disturbance or set-point change occurs. Thus, aiming at the use of easy-tuning systems, a distributed-action control in trays of a diabatic distillation unit with Smith's predictor was implemented in the Simulink environment to further reduce transient times and out-of-specification product. The distributed-action strategy with Smith's predictor led to a reduction of 33.3 min (33 %) in the transient time of the top temperature control loop and 66 % in out-of-specification product, when compared with the conventional strategy, and thus is shown to be an efficient approach to increasing the productivity of distillation plants.     

Strategy for a Scale‐up Correlation in a Dissolved Air Flotation Chamber

Beginning with a laboratory‐scale physical model, a scale‐up correlation for a pilot unit project was determined based on the analysis of dynamic similarity correlations involving the predominant phenomena of a dissolved air flotation (DAF) chamber. The implantation costs of pilot units require special strategies due to the lack of correlations of this type, as novel flotation methods have been considered strictly from an economic standpoint. With the aid of computational fluid dynamics and videos of microbubble and floc flow, inertia and gravity were identified as the predominant phenomena in a DAF chamber. The strategy described herein is simple and reduces the likelihood of future risks in scale‐up investments.     

Real‐time monitoring by proton relaxometry of radical polymerization reactions of acrylamide in aqueous solution

The potential of time‐domain nuclear magnetic resonance (TD‐NMR) for the real‐time monitoring of solution radical polymerizations is demonstrated. A model system composed of a redox‐pair initiator system, acrylamide as monomer and water as solvent was investigated. A second‐generation continuous wave free precession technique was employed to measure the longitudinal relaxation time constant (T₁) of the samples throughout the polymerization reactions. This parameter was shown to be sensitive to the reactant feed free‐radical enhancement of the water molecule relaxation time, making it a good probe to monitor monomer conversion in real time in an automated, non‐destructive fashion. It was found that the T₁ value was better than the transverse relaxation time constant (T₂) for describing the evolution of the polymerization reactions, due to its greater sensitivity to paramagnetic effects. The TD‐NMR signal variation observed was linked to the formation, propagation and termination steps of the radical polymerization kinetics scheme. These first results may contribute to the application of real‐time monitoring of radical polymerization reactions employing low‐cost and robust TD‐NMR spectrometers. © 2018 Society of Chemical Industry     

深层搅拌水泥土基底加固层的三维随机有限元分析

在软土基坑开挖过程中,围护结构的最大侧向位移往往出现在开挖面以下。常用的防范方法是采用深层搅拌法对设计深度以下2~3 m的软土层进行水泥加固处理,形成水泥土加固层以减少围护结构的侧向位移。由于水泥土的强度具有显著的空间变异性,工程设计中通常采用较为保守的整体强度设计值。考虑深层搅拌桩形成过程中的两种主要不确定性因素:桩身位置不确定性和桩身内部水泥土强度不均匀性,将水泥土加固层的强度模拟为随机场,且将其作为材料变量结合有限元仿真模拟进行受力分析。分析结果表明水泥土加固层的设计强度可表示为钻心取样强度平均值减去t倍标准差,对系数t进行了详细探讨,所得结果可为今后类似工程设计提供参考依据。     

Assessment of extreme and metocean conditions in the Maldives for OTEC applications

The Maldives is a group of tropical atolls, considered globally to be one of the most desirable holiday destinations. There is an urgent requirement to decrease their dependency on fossil fuels that are currently the main source of energy, and a number of renewable energy alternatives are being evaluated. Among these, due to the favorable oceanographic and bathymetric conditions, ocean thermal energy conversion (OTEC) systems represent a viable opportunity for clean and reliable power. However, the stresses the OTEC platform will need to endure during adverse environmental conditions are not well defined. The magnitude of these stresses will then have a direct influence on the design of the OTEC device. In order to overcome this uncertainty, this paper uses hindcast data sets from global weather and ocean models to assess the metocean conditions of the Maldives, with particular reference to extreme conditions. After selecting a suitable location for the deployment of the devices, return values calculated using the peaks‐over‐threshold (POT) methodology are estimated for wind, waves, and currents. The 100‐year return value for the significant wave height is found to be 4.5 m, with a joint occurrence of energy periods between 7.5 and 8.5 seconds, whereas the 100‐year return wind has a velocity of 17.8 m/s and the 100‐year return current of 1.9 m/s. The directionality of these extreme events is also considered, showing the southern and western sub‐quadrants as the prevailing sources, which provides essential information for positioning of the platform. Additional evaluations of tropical revolving storms (TRS) and variations in temperature and salinity patterns are also provided over a 1500‐m water column; temperature varies by approximately 24°C, and salinity by around 2 ppt, showing the suitability of OTEC platforms in the Maldives. This work is therefore of interest to offshore renewable energy stakeholders interested in developing a project in the Maldives or those conducting an analogous analysis in other locations.     

Biological conversion of low-grade coal discard to a humic substance-enriched soil-like material

International Journal of Coal Science & Technology - A mutualistic relationship between grasses, coal-degrading fungi, and arbuscular mycorrhizal fungi was proposed to account for the...     

Enhancement of pasta antioxidant activity with oregano and carrot leaf

Five different pasta formulations were prepared using different concentrations of carrot leaf meal (CLM) and oregano leaf meal (OLM). One control formulation (wheat flour and semolina, 70:30 w/w) and four other formulations were prepared using the following amounts of leaf meals: 5% CLM and 5% OLM (I), 10% CLM (II), 10% OLM (III), and 10% CLM, 10% OLM (IV). The highest content of alpha-linolenic acid was found in formulations II and IV, which also had a reduced n-6/n-3 ratio, 3.6 (IV), when compared to the control, which was 19.8. All the samples enhanced with leaf meals showed antioxidant activity by the DPPH radical method; however, it was higher in formulation IV, which was the same observed for phenolic compounds. Pasta added with leaf meals lost more solubles, had shorter cooking time and a lower weight increase than the control pasta. All formulations had significant sensory acceptance.     

Similarity and assumed similarity in personality reports of well-acquainted persons.

The authors obtained self- and observer reports of personality from pairs of well-acquainted college students. Consistent with previous findings, results of Study 1 showed strong cross-source agreement for all 6 HEXACO personality factors (rs ≈ .55). In addition, the authors found modest levels of similarity (r ≈ .25) between dyad members' self-reports on each of 2 dimensions, Honesty-Humility and Openness to Experience. For these same 2 factors, dyad members' self-reports were correlated with their observer reports of the other dyad member (r ≈ .40), thus indicating moderately high assumed similarity. In Study 2, Honesty-Humility and Openness to Experience were the 2 personality factors most strongly associated with the 2 major dimensions of personal values, which also showed substantial assumed similarity. In Study 3, assumed similarity was considerably stronger for close friends than for nonfriend acquaintances. Results suggest that assumed similarity for Honesty-Humility and Openness to Experience reflects a tendency to overestimate one's similarity to persons with whom one has a close relationship, but only on those personality characteristics whose relevance to values gives them central importance to one's identity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Water Efficiency and the Professional Plumbing Sector: How Capacity and Capability Influence Knowledge Acquisition and Innovation

Professional plumbers play an essential role in the implementation of water efficiency. If North America is to achieve high water efficiency standards and more ambitious plumbing codes, plumbers will need to be actively included in the water efficiency discussion. Repositioning the industry will required a cultural shift because the plumbing community has been mostly ignored in discussions of the larger environmental agenda and priorities. This repositioning will require substantial rethinking and retraining. New knowledge will need to be transmitted about emerging water efficient technologies, public policies and practices, as well as the rationale for use in residential and Industrial, Commercial, and Institutional (ICI) sectors. The GreenPlumbers Program (GPP) initiated this knowledge transfer process. Originating in Australia and expanded to the United States, the GPP is a national training and accreditation program for professional plumbers. Their focus has been on upgrading skills and awareness of water efficiency, conservation, and the professional plumbers’ roles in the contemporary environmental context. In this paper we report on the efficacy of the GPP’s curriculum and the process of transferring explicit water efficiency knowledge. Semi-structured interviews and a survey were used to gather the data. We considered how the program participants incorporated the GPP curriculum into their ‘day-to-day’ practices and operations post-certification. We also investigated participants’ motivating factors and cross-referenced these findings to their overall assessment of the program. Recommendations focus on how the GPP can best influence and contribute to a more comprehensive water efficiency agenda.     

Dense Plasma Injection Experiment at MCX

We present preliminary results of the High Density Plasma Injection Experiment at the Maryland Centrifugal Experiment (MCX). HyperV Technologies Corp. has designed, built, and installed a prototype coaxial gun to drive rotation in MCX. This gun has been designed to avoid the blow-by instability via a combination of electrode shaping and a tailored plasma armature. An array of diagnostics indicates the gun is capable of plasma jets with a mass of 160 μg at 70 km/s with an average plasma density above 10¹⁵ cm⁻³. Preliminary measurements are underway at MCX to understand the penetration of the plasma jet through the MCX magnetic field and the momentum transfer from the jet to the MCX plasma. Data will be presented for a wide range of MCX field parameters, and the prospects for future injection experiments will be evaluated.