3D seismic and formation micro-imager (FMI) integrated study to delineate depositional pattern of Abu Madi (Upper Miocene) clastic reservoir rocks in El-Wastani gas field,onshore Nile Delta,Egypt

Ten wells (EW-4, EW-5, EW-6, EW-7, EW-8, EW-9, EW-10, EW-12, EW-13 and EW-15) were interpreted using the composite well logs, data of core analysis, gamma-ray logs, formation micro-imager logs (FMI), and 3D seismic data in SEGY format to understand the stratigraphy of the onshore, Nile Delta, Egypt.The amplitude analysis of 3-D seismic horizon slice of Lower Abu Madi rock unit together with the lithostratigraphic correlation through the study area depending on the gamma-ray log “HSGR” (left to right increasing), and the identification of type of bed geometry, nature of bed contacts, type of the sedimentary structures and the dominant formative paleocurrents by using some available borehole micro-resistivity images (FMI) and core photos. All of these techniques are used together to define the different depositional facies and depositional environment of the Messinian clastics (Lower Abu Madi rock unit), which is considered to be the main reservoir in the El-Wastani gas field, onshore Nile Delta, Egypt.The present study of depositional pattern of the Upper Miocene clastics reservoir (Lower Abu Madi rock unit) revealed that it is represented by high sinuous meandering channels or paleo-valley and three types of fluvial facies were defined; channel fill, channel margin, and floodplain basin.     

The effects of food essential oils on cardiovascular diseases: A review

Essential oils (EO) are complex secondary metabolites, which are produced by aromatic plants and identified by their powerful odors. Present studies on EO and their isolated ingredients have drawn the attention of researchers to screen these natural products and evaluate their effect on the cardiovascular system. Some EO, and their active ingredients, have been reported to improve the cardiovascular system significantly by affecting vaso-relaxation, and decreasing the heart rate and exert a hypotension activity. Several mechanisms have been proposed for the role of EO and their main active components in promoting the health of the cardiovascular system. The objective of this review is to highlight the current state of knowledge on the functional role of EO extracted from plants for reducing the risk of cardiovascular diseases and their mechanisms of action. Research on EO has the potential to identify new bioactive compounds and formulate new functional products for the treatment of cardiovascular diseases such as arterial hypertension, angina pectoris, heart failure, and myocardial infarction.     

Investigating Factors Affecting Water-In-Diesel Fuel Nanoemulsions

In this work, water-in-diesel fuel nanoemulsions were prepared with mixed nonionic surfactants. Several mixtures of sorbitan monooleate and polyoxyethylene (20) sorbitan monooleate, with different Hydrophilic–Lipophilic Balance (HLB) values (9.6, 9.8, 10, 10.2 and 10.4) were prepared to achieve the optimal HLB value. Three mixed surfactant concentrations were prepared at 6, 8 and 10 wt% to identify the optimum concentration. Five emulsions with different water contents: 5, 6, 7, 8 and 9 % (wt/wt) were prepared using a high energy method under the optimum conditions (HLB = 10 and mixed surfactant concentration = 10 %). The effect of the HLB value, mixed surfactant concentration and water content on the droplet size has been studied. The interfacial tension and thermodynamic properties of the individual and the blended emulsifiers were investigated. Droplet size of the prepared nanoemulsions was determined by dynamic light scattering and the nanoemulsion stability was assessed by measuring the variation of the droplet size as a function of time. From the results obtained, it was found that the mean droplet size was formed between 49.5 and 190 nm depending on the HLB value, surfactant concentration and water content of the blended emulsifiers.     

Selective elimination of natural radionuclides during the processing of high grade monazite concentrates by caustic conversion method

This work is directed for removal of the nondesired species (²²⁸Ra, ²²⁶Ra, ²²³Ra, ²¹⁰Pb, Th(IV) and Fe(III)) in the rare earth chloride (RECl₃) liquor before separation of Ln(III). The different factors affecting elimination of radium-isotopes, lead (²¹⁰Pb), Th(IV) and Fe(III) from the RECl₃ liquor, have been investigated and optimized. The results indicated that the activity concentration of radionuclides in RECl₃ liquor was above the safe limits required during the separation process of Ln(III). Adjustment of pH 3±0.1 leads to eliminate 14±1% of radionuclides and Th(IV), and 40±3% of Fe(III), while 12±1% of Ln(III) was lost. The developed method shows that more than 95% of the nondesired species was selectively removed when the liquor was eliminated by potassium sulfate or sulfuric acid solutions in presence of Ba/Pb-carrier (1: 1). About 20-83% of Ln(III) was lost when the non-desired species removed by sodium or ammonium sulfate or potassium chromate solutions. Fe(III) interfered with Ln(III) when radionuclides and Th(IV) were eliminated by 2.6M H₂SO₄ in presence of Ba/Pb-carrier. Finally, use of 0.23M K₂SO₄ or 2.6M H₂SO₄ was efficient to reduce level of ²²⁸Ra, ²²⁶Ra, ²²³Ra and ²¹⁰Pb to the safe limits in viewpoint of radiation protection. In addition, the interfered Th(IV) and Fe(III) were also eliminated efficiently from RECl₃ liquor before the chemical processing of Ln(III).     

CFD simulation of the IAEA 10 MW generic MTR reactor under loss of flow transient

Three-dimensional simulation of the IAEA 10 MW generic reactor under loss of flow transient is introduced using the CFD code, Fluent. The IAEA reactor calculation is a safety-related benchmark problem for an idealized material testing reactor (MTR) pool type specified in order to compare calculational methods used in various research centers. The flow transients considered include fast loss of flow accidents (FLOFA) and slow loss of flow accidents (SLOFA) modeled with exponential flow decay and time constants of 1 and 25 s, respectively. The transients were initiated from a power of 12 MW with a flow trip point at 85% nominal flow and a 200 ms time delay. The simulation shows comparable results as those published by other research groups. However, interesting 3D patterns are shown that are usually lost based on the one-dimensional simulations that other research groups have introduced. In addition, information about the maximum clad surface temperature, the maximum fuel element temperature as well as the location of hot spots in fuel channel is also reported.     

Microstructural and hardness investigation of tool steel D2 processed by laser surface melting and alloying

Several techniques can be used to improve surface properties of metals. These can involve changes on the surface chemical composition such as alloying or on the surface microstructure, such as hardening. In the present work, melting of the surface by a 9 kW CO₂ CW laser of wavelength 10.6 μm was used to alter surface features of D2 tool steel. Carbon powder and nitrogen gas were used as sources of alloying elements during laser processing. The effect of various laser parameters (power and speed) on the microstructure and hardness of D2 tool steel was investigated. Laser powers from 1 to 8 kW and laser speeds from 5 to 15 mm/s were employed. It was found that as the laser power increases, the hardness of the melted zone decreases while that of the heat-affected zone increases. On the other hand, the depth of both of melted and heat-affected zones increases with power.     

Predicting the impact of subsurface heterogeneous hydraulic conductivity on the stochastic behavior of well draw down in a confined aquifer using artificial neural networks

Groundwater flow and behavior have to be investigated based on heterogeneous subsurface formation since the homogeneity assumption of this formation is not valid. Over the past twenty years, stochastic approach and Monte Carlo technique have been utilized very efficiently to understand the groundwater flow behavior. However, these techniques require lots of computational and numerical efforts according to the various researchers’ comments. Therefore, utilizing new techniques with much less computational efforts such as Artificial Neural Network (ANN) in the prediction of the stochastic behavior for the groundwater based on heterogeneous subsurface formation is highly appreciated. The current paper introduces the ANN technique to investigate and predict the stochastic behavior of a well draw down in a confined aquifer based on subsurface heterogeneous hydraulic conductivity. Several ANN models are developed in this research to predict the unsteady two dimensional well draw down and its stochastic characteristics in a confined aquifer. The results of this study showed that ANN method with less computational efforts was very efficiently capable of simulating and predicting the stochastic behavior of the well draw down resulted from the continuous constant pumping in the middle of a confined aquifer with subsurface heterogeneous hydraulic conductivity.     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Cold alkali refining of cellulosic pulps derived from Egyptian cotton and bagasse

A cotton linter pulp, a bagasse dissolving pulp and a bagasse paper pulp were subjected to cold sodium hydroxide refining and the resulting changes in their chemical, physical and submicroscopic characteristics were investigated. In the case of cotton linters the main change took place in the physical and submicroscopic properties and the refining resulted in better reactivity towards xanthation. The α-cellulose content of the paper and viscose pulps increased with alkali concentration until it reached a constant value which depends on the type of pulp and the concentration of alkali. The refining of the paper and viscose pulps impaired their reactivity towards xanthation. The presence of the more hydrophilic hemicellulose increased the swelling ability of the fibres and made them more reactive towards xanthation. The undesirable effects of drying after refining with high alkali concentration could be overcome if the DP is sufficiently lowered. In this case the resulting shorter chain macromolecules dissolve more readily during xanthation.     

Effect of different application techniques on microshear bond strength of self-etch adhesives to dentin

Objectives: To investigate the effect of different self-etch adhesive systems application techniques: active or passive in a single or double layer on adhesive–dentin microshear bond strength.

Methods: Occlusal surfaces of 48 extracted human molars were ground to expose flat superficial dentin surfaces. Specimens were randomly divided into two main groups according to the tested self-etch adhesive system either: One-step self-etch (Adper^TM easy-one) or two-step self-etch (Adper^TM SE Plus). Each adhesive system was applied on the prepared dentin surfaces followed one of these techniques: (1) Passive application of a single layer, (2) Active application of single layer, (3) Passive application of double adhesive layer (with light curing in between), and (4) Active application of double adhesive layers. Resin composite was packed inside micro-tubes fixed on the bonded dentin surfaces and light cured for 40 s. All specimens were stored in artificial saliva either for 24 h or 3 months before testing. Microshear bond strength test was employed using a universal testing machine at a crosshead speed of 0.5 mm/min.

Results: Adper^TM SE Plus showed higher significant microshear bond strength in compared with Adper^TM easy-one. For both adhesive systems active application showed higher significant microshear bond strength to dentin than passive application. Double application of adhesive systems showed lower microshear bond strength than single application.

Conclusion: Active application of self-etch adhesives could improve the dentin microshear bond strength. Double application with curing in between the layers did not improve the bond strength to the tested adhesive.