A charge sharing–based switching scheme for SAR ADCs

This paper presents an energy-efficient switching scheme for successive approximation register (SAR) analogue-to-digital converter (ADC). The proposed scheme employs charge recycling method to keep the capacitor arrays free of transitional energy between bit generations except reset phase. In comparison with the conventional switching scheme, the proposed one achieves 100% transitional energy saving without considering reset phase. In addition, configuration of a 10-bit SAR ADC shows that the proposed switching scheme reduces the capacitor area by 25% compared with the conventional switching scheme.     

Post Deformation at Room and Cryogenic Temperature Cooling Media on Severely Deformed 1050-Aluminum

The annealed 1050-aluminum sheets were initially subjected to the severe plastic deformation through two passes of constrained groove pressing (CGP) process. The obtained specimens were post-deformed by friction stir processing at room and cryogenic temperature cooling media. The microstructure evolutions during mentioned processes in terms of grain structure, misorientation distribution, and grain orientation spread (GOS) were characterized using electron backscattered diffraction. The annealed sample contained a large number of “recrystallized” grains and relatively large fraction (78%) of high-angle grain boundaries (HAGBs). When CGP process was applied on the annealed specimen, the elongated grains with interior substructure were developed, which was responsible for the formation of 80% low-angle grain boundaries. The GOS map of the severely deformed specimen manifested the formation of 43% “distorted” and 51% “substructured” grains. The post deformation of severely deformed aluminum at room temperature led to the increase in the fraction of HAGBs from 20 to 60%. Also, it gave rise to the formation of “recrystallized” grains with the average size of 13 μm, which were coarser than the grains predicted by Zener–Hollomon parameter. This was attributed to the occurrence of appreciable grain growth during post deformation. In the case of post deformation at cryogenic temperature cooling medium, the grain size was decreased, which was in well agreement with the predicted grain size. The cumulative distribution of misorientation was the same for both processing routes. Mechanical properties characterizations in terms of nano-indentation and tensile tests revealed that the post deformation process led to the reduction in hardness, yield stress, and ultimate tensile strength of the severely deformed aluminum.     

TAMER: an adaptive task allocation method for aging reduction in multi-core embedded real-time systems

The Journal of Supercomputing - Technology scaling has exacerbated the aging impact on the performance and reliability of integrated circuits. By entering into nanotechnology era in recent years,...     

Quantifying the effects of crack width,tortuosity, and roughness on water permeability of cracked mortars

The existing service-life prediction models rarely account for the effect of cracks on mass transport and durability of concrete. To correct this deficiency, transport in fractured porous media must be studied. The objective of this paper is to quantify the water permeability of localized cracks as a function of crack geometry (i.e., width, tortuosity, and surface roughness). Plain and fiber-reinforced mortar disk specimens were cracked by splitting tension; and the crack profile was digitized by image analysis and translated into crack geometric properties. Crack permeability was measured using a Darcian flow-thru cell. The results show that permeability is a function of crack width square. Crack tortuosity and roughness reduce the permeability by a factor of 4 to 6 below what is predicted by the theory for smooth parallel plate cracks. Although tortuosity and roughness exhibit fractal behavior, their proper measurement is possible and results in correct estimation of crack permeability.     

The characteristics of hot mixed asphalt modified by nanosilica

The objective of this research is to investigate the characteristics of the hot mixed asphalt modified by 2%, 4%, 6%, and 8% nanosilica by weight of binder. Marshall stability, dynamic creep, and indirect tensile tests were used to study effects of nanosilica on performance characteristics of the mixtures. Results showed that nanosilica can improve Marshall stability, resilient modulus, indirect tensile strength, and fatigue life compared to unmodified mixtures. However, the tensile strength ratio parameter in the moisture sensitivity tests indicated a decrease in the resistance of the modified mixtures against moisture damage.     

A music symbols recognition method using pattern matching along with integrated projection and morphological operation techniques

Multimedia Tools and Applications - Optical Music Recognition (OMR) can be divided into three main phases: (i) staff line detection and removal. The goal of this phase is to detect and to remove...     

IPS-MAC: an informative preamble sampling MAC protocol for wireless sensor networks

Radio transceivers are the main source of energy consumption in wireless sensor networks (WSNs) where the source of energy supply is non-rechargeable battery. Several MAC protocols have been proposed in order to efficiently conserve energy in the link layer via duty-cycling. Low power listening (LPL) methods have been shown to outperform other schemes in lightly loaded situations which are common in environment monitoring applications. Nonetheless, as the network becomes dense, in LPL protocols such as BMAC a large number of nodes stay awake for each transmission, resulting in high levels of energy consumption. This paper introduces the informative preamble sampling (IPS) protocol in which a transmitter implicitly embeds information about its intended receiver via the power at which the preamble is transmitted. This results in far fewer nodes staying awake for each preamble. Upon hearing the preamble, a receiver executes a decision-making algorithm to decide whether to stay awake. If the decision-making algorithm is too lax, then more nodes stay awake following the preamble. On the other hand if the algorithm is too strict, it is likely that the intended receiver misses the preamble. In this paper we derive the optimal operating points for the IPS protocol. We show analytically that the IPS protocol can achieve a gain in energy by at least a factor of 2 over BMAC. We also conduct extensive simulations to show that IPS can achieve significant energy gains compared to BMAC.