Effect of Drosophila suzukii on Blueberry VOCs: Chemical Cues for a Pupal Parasitoid,Trichopria anastrephae

Journal of Chemical Ecology - Biocontrol agents such as parasitic wasps use long-range volatiles and host-associated cues from lower trophic levels to find their hosts. However, this chemical...     

The nature of polymer grafts and substrate shape on the surface degradation of poly(l‐lactide)

Surface grafting of functional polymers is an effective method to alter material properties and degradation behavior. Two different substrate shapes of poly(l ‐lactide) (PLLA), i.e., films and microparticles, were surface‐grafted with hydrophilic monomers, and their surface degradation was monitored. Surface grafting with a hydrophilic and acidic polymer graft [acrylic acid (AA)] induced large alterations in the surface morphology and topography of the films. In contrast, hydrophilic and neutral polymer grafts [acrylamide (AAm)] had no significant effect on the surface degradation behavior, while the PLLA reference and co‐monomeric (AA/AAm) polymer‐grafted samples exhibited intermediate surface degradation rates. The grafted PAA chains induced a local acidic environment on the surface of the substrates, which in turn catalyzed the surface degradation process. This effect was more pronounced in the films than in the microparticles. Thus, the nature of the grafted chains and substrate geometry were shown to affect the surface degradation behavior of PLLA substrates. © 2015 The Authors Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42736.     

Reasons underlying behaviour of motorcyclists disregarding traffic regulations in urban areas of Indonesia

Over the last decade, motorcycle use has been rapidly increasing in Indonesia as have violations of traffic rules committed by motorcyclists. This study aims to explore the impacts of motorcyclists’ attitudes, habits, preferences, and travel patterns on their behaviour in disregarding traffic regulations in three cities in Indonesia. The theory of planned behaviour and structural equation modelling are employed to explore these relationships. Consistent with results from previous studies in developed countries, an individual’s beliefs and attitudes, social norms and perceived behaviour control significantly influence behaviour in disregarding traffic rules. Young adults and students are found to be more likely to frequently violate traffic regulations. However, unlike previous findings from developed countries, in Indonesia, males are less likely to disregard traffic rules than females. Overall, pushing the motorcycle through a (very) narrow gap, speeding, driving recklessly, and overtaking on the wrong side are the most frequent traffic violations that make up repetitive violation behaviour among urban motorcyclists in Indonesia. The results highlight the need to revisit Indonesian National Traffic Law traffic violation classification and penalties and separate violations that are likely to cause fatal results, thus requiring tougher law enforcement, from violations that are unlikely to have fatal consequences.     

Processing and properties of a new biodegradable Mg−Zn−Ca−Zr alloy

Magnesium alloys are used for degradable orthopaedic and cardiovascular implants due to their favourable mechanical and biological properties, degradation ability in physiological environment and stimulatory effect on the new bone formation. The research challenges are related to the increase of biological and mechanical compatibility. For the present study, a magnesium based alloy design was conducted to the following chemical composition: Mg?2.7Zn?1Ca?0.6Zr (wt.%). A complex thermomechanical processing route was applied: a plastic deformation by extrusion at various temperatures and deformation degrees (400 °C–480 °C, ? = 20 %–40 %), followed by various final heat treatments at 200 °C–400 °C for 10 min–60 min. Further, the influence of processing parameters upon the structure, mechanical properties and biological response was studied. Processed specimens were characterized by scanning electron microscopy (secondary electron imaging and energy dispersive spectroscopy) and mechanically by tensile tests. The most representative results were obtained for the samples extruded at 450 °C/? = 20 %, followed by a final heat treatment at 350 °C/15 min, air cooling. Further, for samples which revealed promising results, in‐vitro testing was developed. Biocompatibility testing of the Mg?2.7Zn?1Ca?0.6Zr (wt.%) alloy was realized by indirect contact studies using the Vero (ATCC® CCL‐81?, American Type Culture Collection) cell line. Cells morphologies, cell viability and proliferation were evaluated.     

A Multiphase Pore Scale Network Model of Gas Exchange in Apple Fruit

A multiphase pore scale network model was developed to describe mass transfer in apple fruit. The 3D microscale geometry of the tissue was reconstructed from synchrotron radiation tomography images. Individual cells and pores were identified using a watershed segmentation procedure on a Euclidean distance map of the tissue microstructure. Further morphological characteristics of each individual pore, including its volume, connections to the neighbors and the connected area between the pore and its neighbors, were determined. The tissue was represented by a network of nodes (simplified individual pores and cells) that were interconnected by tubes. The transport of the respiratory gases O₂ and CO₂ between two nodes was modelled using diffusion laws and irreversible thermodynamics, while respiration was taken into account in the individual cellular nodes. A numerical procedure was applied to simulate the gas transport within the discrete network and to compute the local diffusivities of the links in the network. The predicted overall gas diffusivities compared well to experimental data and results computed from a microscale continuum model, thereby validating the pore scale network model. This approach is a computationally attractive alternative to a continuum multiphase approach for modelling gas transport in fruit.     

Effect of wall friction on variation of formwork pressure over time in self-consolidating concrete

In order to accurately predict the varying of formwork pressure over time, it is necessary to consider various factors influencing the development of formwork pressure. A prediction model has been previously proposed, but that model has some limitations in that only intrinsic material characteristics are taken into account. Extrinsic effects such as wall friction, formwork flexibility, and external temperature are excluded in the model. This study focuses on the wall friction effect as one of the extrinsic factors. First, by incorporating the intrinsic model and friction stress acting on the interface, a method of calculating formwork pressure considering the wall friction effect is suggested. To find out how much friction stress is acting on the interface and how it varies over time, formwork pressure tests were performed with circular column formworks having three different diameters. In these columns, the vertical pressure at the bottom and the lateral pressures were measured. To calibrate parameters of the intrinsic model for the same material as that used in the formwork pressure tests, additional tests were conducted with a specially designed apparatus that can exclude effects of extrinsic factors. From tests and analysis results, it was found that wall friction greatly affects the variation of formwork pressure over time. The newly suggested calculation method can give a good prediction of real formwork pressure.     

Nusselt number correlations for a microchannel heat exchanger hot water supplier with S-shaped fins

Using 3D-CFD code, Nusselt number correlations for a microchannel heat exchanger (MCHE) with S-shaped fins used for hot water suppliers are obtained through numerical experiments and then validated. The supercritical carbon dioxide working fluid is assumed to operate around the pseudo-critical point, where fluid properties change radically. Calculations with 20 different temperatures are executed to produce Nusselt number correlations for each side. The fluid inlet temperature in each calculation is defined as 2 °C lower or higher than the constant wall temperature, respectively, for cold and hot side simulations. The small temperature difference of 2 °C is sufficiently small to regard thermal–hydraulic properties as constant. A new integrating method using the correlations to calculate the heat-transfer-performance is proposed. The resultant heat-transfer-performance is compared with that of another numerical result, which is reduced from large geometry and integration. The results agree within 3% error; the calculation accuracy of the method is confirmed. Experimental results with MCHE verify the correlations. The difference is approximately 5%. Using few computer resources, these Nusselt number correlations and the heat-transfer-performance calculation methods using correlation information are sufficiently accurate to evaluate heat exchangers.     

Perturbation technique and method of fundamental solution to solve nonlinear Poisson problems

We show in this work that the Asymptotic Numerical Method (ANM) combined with the Method of Fundamental Solution (MFS) can be a robust algorithm to solve the nonlinear Poisson problem. The ANM transforms the nonlinear problem into a sequence of linear ones which can be solved by MFS. This last method consists of approximating the solution of the linear Poisson problem by a linear combination of fundamental solutions. Some examples are presented to show the efficiency of the proposed method.