以辉锑矿为原料放电等离子烧结快速制备黝铜矿Cu_(12)Sb_4S_(13)及反应机理

采用辉锑矿为原料成功制备出Cu_(12)Sb_4S_(13)块体。研究以Sb_2S_3矿物为原料时烧结工艺对Cu_(12)Sb_4S_(13)合成的影响。在400 ～ 440℃温度区间内均可快速合成Cu_(12)Sb_4S_(13)块体且二次烧结能够进一步减小中间相CuSbS_2和Cu_3SbS_3。第二相Cu_3SbS_4和残留相CuS随着烧结时间的延长而降低。二次烧结前进行机械化球磨处理,干磨比湿磨更容易减小残留相。初次烧结块体的断面SEM和EDS能谱分析表明内部存在Cu或Cu_2S颗粒团聚现象。适当降低Cu或CuS摩尔量(化学计量比0.1 mol)能促进烧结块表面反应进行。烧结过程中,硫磺蒸汽压的导致烧结块表面成分和内部粉末的成分不同。     

Resinification Behavior of Regenerated Feather Keratin Powder

A preliminary study was performed on the resinification behavior of regenerated feather keratin powder by changing the sintering conditions, and the thermal and mechanical properties for the obtained resin were investigated. It was confirmed that the molding at 140°C was enough to complete the resinification. The resin obtained was amorphous and its glass transition temperature could be raised to 93°C. In addition, the hardness of the resin could be increased from 20–25 HV to 90 HV by leaving the as-sintered compact resin in ambient air at room temperature for 133 days. Crosslinking agents that work even at room temperature seem to be synthesized during the molding.     

Intestinal absorption and biological effects of orally administered amorphous silica particles

Although amorphous silica nanoparticles are widely used in the production of food products (e.g., as anticaking agents), there is little information available about their absorption and biological effects after oral exposure. Here, we examined the in vitro intestinal absorption and in vivo biological effects in mice of orally administered amorphous silica particles with diameters of 70, 300, and 1,000 nm (nSP70, mSP300, and mSP1000, respectively) and of nSP70 that had been surface-modified with carboxyl or amine groups (nSP70-C and nSP70-N, respectively). Analysis of intestinal absorption by means of the everted gut sac method combined with an inductively coupled plasma optical emission spectrometer showed that the intestinal absorption of nSP70-C was significantly greater than that of nSP70. The absorption of nSP70-N tended to be greater than that of nSP70; however, the results were not statistically significant. Our results indicate that silica nanoparticles can be absorbed through the intestine and that particle diameter and surface properties are major determinants of the degree of absorption. We also examined the biological effects of the silica particles after 28-day oral exposure in mice. Hematological, histopathological, and biochemical analyses showed no significant differences between control mice and mice treated with the silica particles, suggesting that the silica nanoparticles evaluated in this study are safe for use in food production.     

Effect of surface properties of silica nanoparticles on their cytotoxicity and cellular distribution in murine macrophages

In this study, complexes composed of poly-l-tyrosine (pLT) and single-walled carbon nanotubes (SWCNTs) were produced and the dispersibility of the pLT/SWCNT complexes in water by measuring the ζ potential of the complexes and the turbidity of the solution were investigated. It is found that the absolute value of the ζ potential of the pLT/SWCNT complexes is as high as that of SWCNTs modified with double-stranded DNA (dsDNA) and that the complexes remain stably dispersed in the water at least for two weeks. Thermogravimetry analysis (TGA) and visualization of the surface structures of pLT/SWCNT complexes using an atomic force microscope (AFM) were also carried out.     

Highly specific detection of H2O2-dependent luminol chemiluminescence in stimulated human leukocytes using polyvinyl films.

When human polymorphonuclear leukocytes (PMN) were attached to glass coverslips, cells always spread and formed reactive oxygen species prior to any experimental stimulation. To avoid this, a polyvinylidine chloride film was used as an inactive substance to place the cells. Cells engaged in phagocytosis on the film exhibited a specific H2O2-mediated luminol chemiluminescence (LCL) at the cell-particle interface; the cells stimulated with 12-O-tetradecanoylphorbol-13-acetate became aggregated and the LCL was observed at the cell-cell contact. These results corresponded well with those obtained by an electron microscopic H2O2-demonstration method.     

Prospective predictors of posttraumatic stress disorder symptoms: Direct and mediated relations.

This study assessed the relations between pretrauma risk (neuroticism, negative affect, prior distress) and protective (self-esteem, optimism) factors and posttraumatic stress disorder (PTSD) symptoms and potential mediators (subjective event-related distress, unsupportive social interactions, perceived control) of those relations. Students (N = 1,528) at four U.S. universities completed online surveys assessing pretrauma risk and protective factors at Time 1 (T1); 84% (N = 1,281) completed a survey 2 months later (T2). PTSD symptoms and the three potential mediators were assessed among those who experienced potentially traumatic events between T1 and T2 (n = 264). PTSD symptoms related to prior traumas were controlled in all analyses. In structural equation modeling (SEM) analyses, the relation between risk factors and PTSD symptoms was mediated by unsupportive social interactions. Protective factors did not independently predict PTSD symptoms when risk factors also were included in the SEM models. Implications for research and practice are discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Te concentration dependent photoemission and inverse-photoemission study of FeSe1?xTex

We have characterized the electronic structure of FeSe_1−xTe_x for various x values using soft x-ray photoemission spectroscopy (SXPES), high-resolution photoemission spectroscopy (HRPES) and inverse photoemission spectroscopy (IPES). The SXPES valence band spectral shape shows that the 2 eV feature in FeSe, which was ascribed to the lower Hubbard band in previous theoretical studies, becomes less prominent with increasing x. HRPES exhibits systematic x dependence of the structure near the Fermi level (E_F): its splitting near E_F and filling of the pseudogap in FeSe. IPES shows two features, near E_F and approximately 6 eV above E_F; the former may be related to the Fe 3d states hybridized with chalcogenide p states, while the latter may consist of plane-wave-like and Se d components. In the incident electron energy dependence of IPES, the density of states near E_F for FeSe and FeTe has the Fano lineshape characteristic of resonant behavior. These compounds exhibit different resonance profiles, which may reflect the differences in their electronic structures. By combining the PES and IPES data the on-site Coulomb energy was estimated at 3.5 eV for FeSe.     

Iterative Design of the Reduced-Order Weight and Controller for the $H_{infty}$ Loop-Shaping Method Under Open-Loop Magnitude Constraints for SISO Systems

The H _infin loop-shaping method is known to be an effective control method. However, it has two drawbacks. The first is that it is difficult to select appropriate loop-shaping weights, and the second is that the resulting controller is very complex. For the first drawback, Lanzon has proposed a suboptimal loop-shaping weight design method. It is formulated as a generalized eigenvalue minimization problem (GEVP). This suboptimal loop-shaping weight design method provides high-order weights, exacerbating the second drawback. To resolve these two drawbacks, a reduced-order loop-shaping weight design method is proposed for SISO systems in this paper. In the proposed method, the weight structure is first fixed, and the weight is then decomposed into a frequency-dependent vector and parameter matrices characterizing the loop-shaping weight. Since the open-loop constraints are represented as linear matrix inequalities with respect to the parameter matrices, the proposed reduced-order loop-shaping weight design problem for SISO systems is formulated as a GEVP, as well as Lanzon's suboptimal loop-shaping weight design method. The proposed method can reduce the designer's burden, although it is only valid for SISO systems. The effectiveness of the proposed method is verified experimentally by velocity control of a belt-driven two-mass system.     

Trans-activator Tax of human T-cell leukemia virus type 1 enhances mutation frequency of the cellular genome

Two principles are presented that describe directional confounds associated with baseline differences: Principle 1: Change scores are confounded with baseline whenever data are skewed. Principle 2: When baseline differences are real, ANCOVA has a directional bias that magnifies differences in one direction and masks those in the other direction. Both principles involve a directional bias that is related to the direction of baseline difference and the direction of the hypothesized difference in change. Ethical dilemmas arise if decisions (whether or not to transform, whether or not to use ANCOVA) are chosen in order to maximize power by capitalizing on the directional bias and Type 1 error.     

Analysis of in situ water transport in Nafion by confocal micro-Raman spectroscopy

A proton exchange membrane fuel cell (PEMFC) is a promising alternative source of clean power for automotive applications, but its acceptance in such applications depends on reducing its costs and increasing its power density to achieve greater compactness. To meet these requirements, further improvements in cell performance are required. In particular, when the fuel cell is operating at high current density, the transport of water through the membrane has considerable impacts on the performance because of the large concentration gradient of water between the cathode and anode. Through-plane water permeation across the membrane is therefore a fundamental process in operational PEMFCs. Recently, resistance to water transport at the membrane-gas interface has been reported, and this is affected by the temperature and relative humidity. We investigated the distribution of water inside a proton exchange membrane during a water permeation test by using confocal micro-Raman spectroscopy with a fine spatial resolution (2-3 μm). In the presence of a water flux, the local water content is not necessarily in equilibrium with the water activity in the gas phase. Interfacial water-transport resistance due to the presence of a non-equilibrium membrane structure at the interface cannot be neglected.