Overlapping community detection using core label propagation algorithm and belonging functions

Applied Intelligence - The community detection in complex networks has become a major field of research. Disjoint community detection deals often with getting a partition of nodes where every node...     

Dynamic response of ferrofluidic deformable mirrors using elastomer membrane and overdrive techniques

The experimental results obtained with a ferrofluidic deformable mirror controlled by electro-magnet actuators are presented here. Using a step input through a single actuator, we obtained a steady-state settling time of 100?ms; however, different combinations of overdrive inputs can be used to decrease it to 25?ms. A new technique which consists of laying down an elastomer membrane, coated with an aluminum film, on the ferrofluid is also discussed. By adding the membrane on the ferrofluid, it further decreases the time response by a factor of 2. Furthermore, the thin aluminum layer improves the reflectivity of the mirror. Finally, using the membrane and the overdrive techniques combined, the time response is improved by a factor of 20. Numerical simulations show that ferrofluidic mirrors using membranes and improved electronics should reach settling times of the order of a millisecond. Presumably, even lower settling times could be possible.     

On the Room-Temperature Mechanical Properties of an Ion-Irradiated TiZrNbHfTa Refractory High Entropy Alloy

JOM - Refractory high-entropy alloys (RHEAs) are potential candidate materials for use in next-generation nuclear reactors due to their excellent mechanical performance at high temperatures. Here,...     

Partial Sperm beta1 Integrin Subunit Deletion Proves Its Involvement in Mouse Gamete Adhesion/Fusion

We have previously shown, using antibodies, that the sperm alpha6beta1 integrin is involved in mouse gamete fusion in vitro. Here we report the conditional knockdown of the sperm Itgb1 gene. It induced a drastic failure of sperm fusogenic ability with sperm accumulation in the perivitelline space of in vitro inseminated oocytes deleted or not for the Itgb1 gene. These data demonstrate that sperm, but not oocyte, beta1 integrin subunit is involved in gamete adhesion/fusion. Curiously, knockdown males were fertile in vivo probably because of the incomplete Cre-mediated deletion of the sperm Itgb1 floxed gene. Indeed, this was shown by Western blot analysis and confirmed by both the viability and litter size of pups obtained by mating partially sperm Itgb1 deleted males with females producing completely deleted Itgb1 oocytes. Because of the total peri-implantation lethality of Itgb1 deletion in mice, we assume that sperm that escaped the Itgb1 excision seemed to be preferentially used to fertilize in vivo. Here, we showed for the first time that the deletion, even partial, of the sperm Itgb1 gene makes the sperm unable to normally fertilize oocytes. However, to elucidate the question of the essentiality of its role during fertilization, further investigations using a mouse expressing a recombinase more effective in male germ cells are necessary.     

Minimizing the Consequences of Intentional Attack on Water Infrastructure

Abstract:  Since September 11, 2001, protecting the nation's water infrastructure and improving water network resiliency have become priorities in the water industry. In this work, we develop methods to mitigate the consequences of water shortage resulting from destruction of facilities in water networks. These methods integrate search techniques, such as branch-and-bound and genetic algorithms, with a hydraulic solver to check demand feasibilities across a residual water network. The objective is to identify a feasible customer demand pattern that minimizes the consequences of water shortage in the downgraded network. We present a mathematical model of the problem addressed along with an exact solution methodology and several heuristics. We apply these methodologies to three water networks ranging in size from approximately 10–700 nodes and compare the solution quality and computational efficiency.     

Influence of the character of NOM on the ozonation of MIB and geosmin

Tastes and odours (T&Os) are a major concern in drinking water as they are not efficiently removed by conventional water treatment. Ozonation has been effective for their destruction in some studies. However, the natural organic matter (NOM) in waters can affect the ozonation process and subsequently affect the destruction of T&Os. Five NOM fractions were isolated and ozonated in synthetic waters. The fraction containing the more highly coloured, higher molecular weight compounds exhibited the highest ozone (O3) demand, whereas the low aromatic fraction exhibited the lowest O3 demand. The character of the NOM fractions influenced the ozonation of MIB and geosmin. The destruction of MIB and geosmin was significantly higher in the fraction with the highest colour and UV/visible absorbance at all O3 doses. The destruction of the compounds in the other fractions showed the same trends, increasing MIB and geosmin destruction with increasing UV/visible absorbing character of the NOM. MIB was also ozonated in two real waters. with results showing a competing effect between NOM concentration and NOM character. The O3 reaction time was shown to be important for the destruction of both compounds.     

Chlorination of bromide-containing waters: Enhanced bromate formation in the presence of synthetic metal oxides and deposits formed in drinking water distribution systems

Bromate formation from the reaction between chlorine and bromide in homogeneous solution is a slow process. The present study investigated metal oxides enhanced bromate formation during chlorination of bromide-containing waters. Selected metal oxides enhanced the decay of hypobromous acid (HOBr), a requisite intermediate during the oxidation of bromide to bromate, via (i) disproportionation to bromate in the presence of nickel oxide (NiO) and cupric oxide (CuO), (ii) oxidation of a metal to a higher valence state in the presence of cuprous oxide (Cu₂O) and (iii) oxygen formation by NiO and CuO. Goethite (α-FeOOH) did not enhance either of these pathways. Non-charged species of metal oxides seem to be responsible for the catalytic disproportionation which shows its highest rate in the pH range near the pK_a of HOBr. Due to the ability to catalyze HOBr disproportionation, bromate was formed during chlorination of bromide-containing waters in the presence of CuO and NiO, whereas no bromate was detected in the presence of Cu₂O and α-FeOOH for analogous conditions. The inhibition ability of coexisting anions on bromate formation at pH 8.6 follows the sequence of phosphate >> sulfate > bicarbonate/carbonate. A black deposit in a water pipe harvested from a drinking water distribution system exerted significant residual oxidant decay and bromate formation during chlorination of bromide-containing waters. Energy dispersive spectroscopy (EDS) analyses showed that the black deposit contained copper (14%, atomic percentage) and nickel (1.8%, atomic percentage). Cupric oxide was further confirmed by X-ray diffraction (XRD). These results indicate that bromate formation may be of concern during chlorination of bromide-containing waters in distribution systems containing CuO and/or NiO.     

Optimized silyl ester diblock methacrylic copolymers: A new class of binders for chemically active antifouling coatings

This work focuses on the assessment of the erosion properties and antifouling (AF) performance of silyl ester copolymer-based coatings through laboratory and field tests. Silyl ester diblock copolymers were synthesized via the reversible addition-fragmentation chain transfer polymerization and were selected as binders for developing copper-free chemically active coatings. AF coatings were subsequently prepared using biocides (Sea-Nine™ 211, Preventol^® A4S, and zinc pyrithione). Laboratory-based bioassays, targeting the growth of selected microorganisms (bacteria and microalgae) and barnacle settlement, highlighted that the silyl ester methacrylic-based binders did not inhibit the growth of microorganisms, are essentially non-toxic to nauplii and reduced the settlement of Amphibalanus amphitrite cyprids. The corresponding biocidal coatings are potent toward bacteria and diatoms but were demonstrated to be toxic against the barnacle larvae. Field test results showed variations with geographical locations: in sub-tropical area, the silyl ester methacrylic-based coatings failed to inhibit the settlement of barnacles; however, field tests performed in Mediterranean Sea for 18 months demonstrated that biocidal silyl ester methacrylic-based coatings were promising candidates.     

In situ injection of THF to trigger gas hydrate crystallization: Application to the evaluation of a kinetic hydrate promoter

This paper investigates an original method to efficiently trigger gas hydrate crystallization. This method consists of an in situ injection of a small amount of THF into an aqueous phase in contact with a gas-hydrate-former phase at pressure and temperature conditions inside the hydrate metastable zone. In the presence of a CO₂–CH₄ gas mixture, our results show that the THF injection induces immediate crystallization of a first hydrate containing THF. This triggers the formation of the CO₂–CH₄ binary hydrate as proven by the pressure and temperature reached at equilibrium. This experimental method, which “cancels out” the stochasticity of the hydrate crystallization, was used to evaluate the effect of the anionic surfactant SDS at different concentrations, on the formation kinetics of the CO₂–CH₄ hydrate. The results are discussed and compared with those published in a recent article (Ricaurte et al., 2013), where THF was not injected but present in the aqueous phase from the beginning and at much higher concentrations.     

Simulated annealing-based fitting of CAD models to point clouds of mechanical parts’ assemblies

Engineering with Computers - This paper introduces a new fitting approach to allow an efficient part-by-part reconstruction or update of editable CAD models fitting the point cloud of a digitized...