Chemical exposures from upholstered furniture with various flame retardant technologies

Upholstered furniture is often manufactured with polyurethane foam (PUF) containing flame retardants (FRs) to prevent the risk of a fire and/or to meet flammability regulations, however, exposure to certain FRs and other chemicals have been linked to adverse health effects. This study developed a new methodology for evaluating volatile organic compound (VOC) and FR exposures to users of upholstered furniture by simulating use of a chair in a controlled exposure chamber and assessing the health significance of measured chemical exposure. Chairs with different fire-resistant technologies were evaluated for VOC and FR exposures via inhalation, ingestion, and dermal contact exposure routes. Data show that VOC exposure levels are lower than threshold levels defined by the US and global indoor air criteria. Brominated FRs were not detected from the studied chairs. The organophosphate FRs added to PUF were released into the surrounding air (0.4 ng/m³) and as dust (16 ng/m²). Exposure modeling showed that adults are exposed to FRs released from upholstered furniture mostly by dermal contact and children are exposed via dermal and ingestion exposure. Children are most susceptible to FR exposure/dose (2 times higher average daily dose than adults) due to their frequent hand to mouth contact.     

Status of Mysis diluviana in Lake Ontario in 2013: Lower abundance but higher fecundity than in the 1990s

Mysis diluviana is a major component of prey fish diets in the Great Lakes, so annual production of M. diluviana is important for understanding and modeling energy flow through Great Lakes food webs. However, only three lake-wide measurements of M. diluviana annual production in Lake Ontario are currently available (1971, 1990, 1995). During 2013, lake-wide coverage of Lake Ontario was achieved during four periods from April to November. Annual mean density and biomass of M. diluviana in 2013 were 99?#/m² (SE: 8) and 318?mg?dw/m² (SE: 28) – approximately half of values observed in 1990s. M. diluviana comprised 13–30% of offshore zooplankton biomass in each period. Reproduction peaked in fall, with mean brood size of 32 embryos (range: 11–49), at least 10% larger than in 1990s. Generation time was two years from embryo to initial reproduction. Growth rates were 0.052?mm/d for the age-0 cohort and 0.027?mm/d for the age-1 cohort. Age-0 growth rate was significantly higher than in 1980s–90s (0.035?mm/d). Annual production in 2013 was 0.85?g?dw/m²/yr (SE: 0.03) which was 30–40% of values observed in 1990 and 1995 (2.23 and 2.53?g/m²/yr). Annual production to biomass ratio (P/B) in 2013 was 2.65?/yr which was 80–85% of values observed in 1990 and 1995 (3.24 and 3.11?/yr), but this difference was not statistically significant. Our results suggest that changes in annual production over time can be estimated using changes in biomass over time and a mean P/B ratio.     

The impacts of cattle access points on deposited sediment levels in headwater streams in Ireland

Cattle access to streams has been linked globally with degradation of stream water quality, driven largely by bank erosion and resultant instream, fine sediment deposition. The majority of evidence on such effects is however based in arid and semiarid regions of the United States and Australia, with few studies relating to cool temperate climates such as Northwest Europe. In this study, “Quorer” resuspendable sediment samples were taken from riffle geomorphic units upstream (control) and at two points downstream (pressure and recovery) of cattle access points in headwater streams in agricultural catchments in Ireland to assess levels of deposited stream sediment. Samples were taken in April/May (2016) prior to the grazing season and in October (2016) at the end of the grazing season. Sites in good‐high ecological status catchments and less than good ecological status catchments were included in the study. Higher levels of sediment were found downstream of cattle access points in both good‐high status and less than good status catchments; however, the impacts of access points were spatially confined to, in most cases, the area immediately downstream of the point of access. There was a strong correlation between deposited sediment mass and organic matter (OM) mass, with levels of OM increasing linearly with deposited sediment mass. Levels of measured sediment were negatively correlated with riparian habitat health (measured using a qualitative habitat assessment). The results of this study highlight the need for measures to prevent cattle access to headwater streams where access points can be many in order to manage local habitat quality and downstream water quality issues.     

丹尼尔斯大厦 加拿大多伦多

正多伦多大学丹尼尔斯建筑、景观和设计学院的设计采用了分期的方法,包括修复和扩建以前称为"知识学院"的标志性建筑,将现有建筑物改造成与教学和需求更相关的框架体系。这个十九世纪遗址的总体规划是通过对预期用途模式和场地生态的分析而制定的,目的是重新定位校园西南角与安大略湖的轴线,并为学院创造新的特性。丹尼尔斯建筑、景观和设计学院需要一个可持续发展的新型工     

A cathode support structure for use in a magnetron oscillator experiment

A low temperature co-fired ceramic (LTCC) material system has been used to develop a protype field emission cathode structure for use in an experimental magnetron oscillator. The structure is designed for used with 30 gated field emission array (GFEA) die electrically connected through silver metal traces and electrical vias. To approximate a cylinder, the cathode structure (48 mm long and 13.7 mm in diameter) is comprised of 10 faceted plates which cover the GFEA dies. Slits in the facet plates allow electron injection. The GFEA die (3 mm × 8 mm) are placed in axial columns of 3 and spaced azimuthally around a cylindrical support structure in a staggered configuration resulting in 10 azimuthal locations. LTCC manufacturing techniques were developed in order to fabricate the newly designed cathode with seven layers wrapped to form the cylinder with electrical traces and vias. Two different cathode wrapping techniques and two different via filling techniques were studied and compared. Two different facet plate manufacturing techniques were studied. Finally, four different support stand configurations for firing the cylindrical structure were also compared with a square post stand having the best circularity and linearity measurements of the fired structure.     

Lignin solvated in zwitterionic Good's buffers displays antibacterial synergy against Staphylococcus aureus

The volume of industrial lignin is expected to increase with the deployment of biorefineries that convert lignocellulosic biomass to renewable chemicals and fuels. Interest in using lignin for value-added biomedical applications requires understanding of its effects on mammalian and microbial cells, which has been impaired by the toxicity of the solvents used to solubilize lignin. In this study, lignin is solvated in zwitterionic Good's buffers compatible with culture media. Up to 100 mg lignin can be solvated in 1 ml of 3-morpholinopropane-1-sulfonic acid (MOPS, pH 7.2) within 60 min at room temperature, whereby MOPS acts as a chaotropic agent. The addition of MOPS-solvated lignin to cultures of Staphylococcus aureus UAMS-1 containing a subinhibitory concentration of tunicamycin reduced growth more than 99% compared to tunicamycin alone, making lignin of interest as an antibiotic adjuvant. This effect of lignin is attributed to damage to the bacterial cell membrane.     

A Step toward Molecular Evolution of RNA: Ribose Binds to Prebiotic Fatty Acid Membranes,and Nucleosides Bind Better than Individual Bases Do

A major challenge in understanding how biological cells arose on the early Earth is explaining how RNA and membranes originally colocalized. We propose that the building blocks of RNA (nucleobases and ribose) bound to self-assembled prebiotic membranes. We have previously demonstrated that the bases bind to membranes composed of a prebiotic fatty acid, but evidence for the binding of sugars has remained a technical challenge. Here, we used pulsed-field gradient NMR spectroscopy to demonstrate that ribose and other sugars bind to membranes of decanoic acid. Moreover, the binding of some bases is strongly enhanced when they are linked to ribose to form a nucleoside or – with the addition of phosphate – a nucleotide. This enhanced binding could have played a role in the molecular evolution leading to the production of RNA.     

Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.     

In Silico/In Vitro Hit-to-Lead Methodology Yields SMYD3 Inhibitor That Eliminates Unrestrained Proliferation of Breast Carcinoma Cells

SMYD3 is a lysine methyltransferase that regulates the expression of over 80 genes and is required for the uncontrolled proliferation of most breast, colorectal, and hepatocellular carcinomas. The elimination of SMYD3 restores normal expression patterns of these genes and halts aberrant cell proliferation, making it a promising target for small molecule inhibition. In this study, we sought to establish a proof of concept for our in silico/in vitro hit-to-lead enzyme inhibitor development platform and to identify a lead small molecule candidate for SMYD3 inhibition. We used Schrodinger^® software to screen libraries of small molecules in silico and the five compounds with the greatest predicted binding affinity within the SMYD3 binding pocket were purchased and assessed in vitro in direct binding assays and in breast cancer cell lines. We have confirmed the ability of one of these inhibitors, Inhibitor-4, to restore normal rates of cell proliferation, arrest the cell cycle, and induce apoptosis in breast cancer cells without affecting wildtype cell behavior. Our results provide a proof of concept for this fast and affordable small molecule hit-to-lead methodology as well as a promising candidate small molecule SMYD3 inhibitor for the treatment of human cancer.