Tensile testing and fracture mechanism analysis of polyvinyl alcohol nanofibrous webs

A tensile properties testing study was conducted to understand the influence of thickness, cross-head speed (speed of testing), gauge length (GL; specimen test length), and sample shape on important tensile properties of polyvinyl alcohol (PVA) nanofiber webs. The effects of each testing parameter on load at break, extension at break, Young's modulus, and tensile stress–strain curve of PVA nanofiber webs are analyzed. The Welch two sample t-tests show the significant difference among tested data. Using interaction plots, two-way analysis of variance, and margin mean plots, the interaction effects among testing parameters have been analyzed. Of all the factors, cross-head speed, the interaction among GL, and sample thickness (GL: Thickness) and the interaction among GL, testing speed and sample thickness (GL: Speed: Thickness) have significant influence on the tensile properties of PVA nanofiber webs. Moreover, the hypothesized model of mechanism of tensile strain–stress curve of PVA nanofiber webs has been proposed. Based on the model, the tensile strain–stress curve can be split into three stages: linear elastic, partial break up, and complete breakage. This study will provide a better understanding of tensile testing parameters' effects and their interaction effects on the tensile properties of nanowebs.     

Novel temperature measurement method & thermodynamic investigations of amorphous polymers during high rate deformation

Polymers are frequently used in applications in which they may be exposed to high rate or impact loading, and there is growing industrial importance in understanding their mechanical behavior at different strain rates. An important aspect of this is the temperature rise due to adiabatic conditions in high rate loading. This paper describes research that has been performed to measure the temperature rise that occurs in specimens undergoing rapid deformation. A novel thermocouple design is presented and applied to PMMA and 20 wt% DINP-plasticized PVC, deformed at moderate and high strain rates. The measurements are accompanied by investigations of strain energy.     

The politics of co-design in ICT for sustainable development

ABSTRACT

In this paper, we discuss an approach to co-design in ICT for sustainable development. We first set out to consider sustainable development as incorporate a concern for resilience, adaptability, and autonomy. We then draw on an ongoing participatory design project to illustrate how co-design projects can be configured, along with the political choices that this entails, to support such development.     

Literature review--efficacy of various disinfectants against Legionella in water systems

There have been reported outbreaks of Legionnaires' disease at hospitals and industrial facilities, which prompted the development of various preventive measures. For example, Ford has been developing and implementing such a measure at its facilities worldwide to provide technical guidance for controlling Legionella in water systems. One of the key issues for implementing the measure is the selection of a disinfectant(s) and optimum conditions for its use. Therefore, available publications on various disinfectants and disinfection processes used for the inactivation of Legionella bacteria were reviewed. Two disinfection methods were reviewed: chemical and thermal. For chemical methods, disinfectants used were metal ions (copper and silver), oxidizing agents (halogen containing compounds [chlorine, bromine, iodine, chlorine dioxide, chloramines, and halogenated hydantoins], ozone, and hydrogen peroxide), non-oxidizing agents (heterocyclic ketones, guanidines, thiocarbamates, aldehydes, amines, thiocyanates, organo-tin compounds, halogenated amides, and halogenated glycols), and UV light. In general, oxidizing disinfectants were found to be more effective than non-oxidizing ones. Among oxidizing agents, chlorine is known to be effective and widely used. Among non-oxidizing agents, 2,2-dibromo-3-nitropropionamide appears to be the most effective followed by glutaraldehyde. Isothiazolin (known as Kathon), polyhexamethylene biguanide, and 2-bromo-2-nitropropionamide (known as Bronopol) were found to be less effective than glutaraldehyde. Thermal disinfection is effective at > 60 degrees C (140 degrees F).     

Evaluating rock mass disturbance within open-pit excavations using seismic methods: A case study from the Hinkley Point C nuclear power station

Understanding rock strength is essential when undertaking major excavation projects,as accurate assessments ensure both safe and cost-effective engineered slopes.Balancing the cost-safety trade-off becomes more imperative during the construction of critical infrastructure such as nuclear power stations,where key components are built within relatively deep excavations.Designing these engineered slopes is reliant on rock strength models,which are generally parameterised using estimates of rock properties(e.g.unconfined compressive strength,rock disturbance) measured prior to the commencement of works.However,the physical process of excavation weakens the remaining rock mass.Therefore,the model also requires an adjustment for the anticipated rock disturbance.In practice,this parameter is difficult to quantify and as a result it is often poorly constrained.This can have a significant impact on the final design and cost of excavation.We present results from passive and active seismic surveys,which image the extent and degree of disturbance within recently excavated slopes at the construction site of Hinkley Point C nuclear power station.Results from active seismic surveys indicate that the disturbance is primarily confined to 0.5 m from the excavated face.In conjunction,passive monitoring is used to detected seismic events corresponding to fracturing on the cm-scale and event locations are in agreement with 0.5 m of disturbance into the rock face.This suggests rock disturbance at this site is relatively low and occurred during and immediately after the excavation.A ratio of seismic velocities recorded before and after excavations are used to determine the disturbance parameter required for the Hoek-Brown rock failure criterion,and we assess that rock disturbance is low with the magnitude of the disturbance diminishing more quickly than expected into the excavated slope.Seismic methods provide a low-cost and quick method to assess excavation related rock mass disturbance,which can lead to cost reductions in large excavation projects.     

A graph coloring constructive hyper-heuristic for examination timetabling problems

In this work we investigate a new graph coloring constructive hyper-heuristic for solving examination timetabling problems. We utilize the hierarchical hybridizations of four low level graph coloring heuristics, these being largest degree, saturation degree, largest colored degree and largest enrollment. These are hybridized to produce four ordered lists. For each list, the difficulty index of scheduling the first exam is calculated by considering its order in all lists to obtain a combined evaluation of its difficulty. The most difficult exam to be scheduled is scheduled first (i.e. the one with the minimum difficulty index). To improve the effectiveness of timeslot selection, a?roulette wheel selection mechanism is included in the algorithm to probabilistically select an appropriate timeslot for the chosen exam. We test our proposed approach on the most widely used un-capacitated Carter benchmarks and also on the recently introduced examination timetable dataset from the 2007 International Timetabling Competition. Compared against other methodologies, our results demonstrate that the graph coloring constructive hyper-heuristic produces good results and outperforms other approaches on some of the benchmark instances.     

Measuring hydraulic properties of geotextiles after installation damage

Since geotextiles have been progressively incorporated into coastal protection structures, the influence of installation damage on them has been the primary concern. During installation/construction, geotextiles are repeatedly subjected to high mechanical stresses which often exceed service stress. It is therefore vital to evaluate the mechanical and hydraulic damage and determine the consequences of these damages to better develop criteria for selection of suitable products. As these damages could reduce the material's mechanical strength and hydraulic efficiency, or in the severest form of damage, puncturing, would end the separation function. The properties investigated in this paper include the permittivity and apparent opening size (AOS) of geotextiles. Generally, the greater the drop energy of armour units applied to geotextiles, the greater the potential for damage. Findings show that the residual permittivity could increase significantly, 45% during installation. The preliminary design of coastal structures will be optimised as engineers and designers can better estimate the amount of damage on geotextiles upon installation.     

Fibre diffraction in the analysis of filamentous virus structure

In many plant and bacterial viruses, a filamentous nucleocapsid makes up the entire virus particle. These viruses usually form fibres naturally, but they do not crystallize. Fibre diffraction has therefore been the method of choice for structural studies, aided in recent years by cryo-electron microscopy (EM) and solid state nuclear magnetic resonance (ssNMR). Filamentous viruses, particularly tobacco mosaic virus (TMV), have been important in developing fibre diffraction methods, and fibre diffraction allowed TMV to be among the first virus structures determined. Structures of several viruses related to TMV and several filamentous bacterial viruses have been determined at resolutions of 3?Å or better, and lower resolution structures have been determined by fibre diffraction, sometimes in conjunction with other methods, for many other, unrelated, filamentous viruses.     

The DOE advanced gas reactor fuel development and qualification program

The high outlet temperatures and high thermal-energy conversion efficiency of modular high-temperature gas-cooled reactors (HTGRs) enable an efficient and cost-effective integration of the reactor system with non-electricity-generation applications, such as process heat and/or hydrogen production, for the many petrochemical and other industrial processes that require temperatures between 300°C and 900°C. The U.S. Department of Energy (DOE) has selected the HTGR concept for the Next Generation Nuclear Plant (NGNP) Project as a transformative application of nuclear energy that will demonstrate emissions-free nuclear-assisted electricity, process heat, and hydrogen production, thereby reducing greenhouse-gas emissions and enhancing energy security. The objective of the DOE Advanced Gas Reactor (AGR) Fuel Development and Qualification program is to qualify tristructural isotropic (TRISO)-coated particle fuel for use in HTGRs. An overview of the program and recent progress is presented.     

Structural stability of silver under single-chamber solid oxide fuel cell conditions

In the present study, structural stability of silver under single-chamber conditions has been examined. Micro-tubular cells made of conventional solid oxide fuel cell materials (Ni-YSZ/YSZ/LSM) with silver paste and silver current-collecting wires (for both electrodes) were prepared. The cells were operated with methane/air mixture of 25/60 mL min⁻¹, furnace temperature of 750 °C, and at an operating voltage of 0.5 V. The results showed increasing porosity in the current-collecting silver wire with time, leading to rupture, finally. It is postulated that the porosity formation could be due to the formation of silver oxide which is highly unstable (volatile) at operating temperature considered in this study. Furthermore, vaporization and melting of silver due to cell overheating under mixed-reactant conditions is expected. Based on experimental evidences, it is concluded that silver may not be a good choice to be employed under the above specified operating conditions, as it lacks long-term structural stability.