Synthesis of polyamide-hydroxyapatite nanocomposites

Simultaneous one-pot syntheses of PA66 and HAp were carried out by extracting H₂O and CO₂ from PA66 monomers and HAp raw materials, respectively, resulting in the formation of a polyamide (PA) 66-hydroxyapatite (HAp) nanocomposite. During the process, a spherical nano-sized HAp particle was precipitated following dissolution of micro-sized CaHPO₄・2H₂O. The PA66 monomers were subsequently adsorbed onto the generated HAp product. Some of the adsorbed PA66 monomers formed a bound polymer on HAp, and an increase in the adhesiveness of the PA66-HAp interface was observed as the polymerization progressed. During this process, the synthesis of a nanocomposite from a micro-sized raw material and creation of an autonomous strong interface between the matrix and filler was achieved. In addition, the shape of the resultant HAp was controllable and could be modified to needle shape by the addition of F⁻ and Mg²⁺ ions to the raw material. HAp could also be changed to plate shape via octa-calcium phosphate (OCP). Notably, during the synthesis, the filler shape of the nanocomposite could be controlled to 0D (particle), 1D (needle), and 2D (plate).     

A Novel LRRK2 Variant p.G2294R in the WD40 Domain Identified in Familial Parkinson’s Disease Affects LRRK2 Protein Levels

Leucine-rich repeat kinase 2 (LRRK2) is a major causative gene of late-onset familial Parkinson’s disease (PD). The suppression of kinase activity is believed to confer neuroprotection, as most pathogenic variants of LRRK2 associated with PD exhibit increased kinase activity. We herein report a novel LRRK2 variant—p.G2294R—located in the WD40 domain, detected through targeted gene-panel screening in a patient with familial PD. The proband showed late-onset Parkinsonism with dysautonomia and a good response to levodopa, without cognitive decline or psychosis. Cultured cell experiments revealed that p.G2294R is highly destabilized at the protein level. The LRRK2 p.G2294R protein expression was upregulated in the patient’s peripheral blood lymphocytes. However, macrophages differentiated from the same peripheral blood showed decreased LRRK2 protein levels. Moreover, our experiment indicated reduced phagocytic activity in the pathogenic yeasts and α-synuclein fibrils. This PD case presents an example wherein the decrease in LRRK2 activity did not act in a neuroprotective manner. Further investigations are needed in order to elucidate the relationship between LRRK2 expression in the central nervous system and the pathogenesis caused by altered LRRK2 activity.     

Design and implementation of a vehicle interface protocol using an IEEE 1394 network

A wide variety of in-vehicle devices such as camera sensors, navigation systems, telematics and communication equipments have been incorporated into a vehicle to realize Intelligent Transport Systems (ITS) applications. Because an efficient standardized network is required, ITS Data Bus (IDB) has been discussed to carry high-speed multimedia data for audio, video and other real-time ITS applications. For connecting devices in a standardized manner, the IDB network has architecture with a gateway called vehicle interface which is located between automaker’s proprietary network and the standardized IDB network. IEEE 1394 (also known as iLink or FireWire), which can transport multimedia data for consumer electronics, is a good candidate for IDB network. In this paper, we analyze the issues for existing AV/C protocol (application layer protocol over IEEE 1394) to comprise the IDB network. In addition, we designed and implemented the vehicle interface protocol as a higher layer of IEEE 1394 to address the AV/C protocol issues for realizing the whole IDB network architecture.     

Structural characterization of 1,2-polybutadiene by 13C-n.m.r. spectroscopy: 2. Sequence distribution of 1,2-unit in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were determined in relation to the sequence distribution of 1,2- and 1,4-units on the basis of the ¹³C-n.m.r. signal assignment of the methyl carbons. The observed triad distributions of 1,2- and 1,4-units and configurational distributions of the 1,2-unit are in good agreement with the calculated distributions from transition probabilities. The number average sequence lengths of the 1,2-unit and the 1,2-unit in the racemic addition are 5.7 to 8.0 and 4.1 to 5.4, respectively. From the extrapolation of the plot of the number average sequence length against the crystallinity of the starting 1,2-polybutadienes, the minimum sequence length for crystallization is estimated to be 3.7 for the 1,2-unit in the racemic addition.     

Preparation of soluble TiCl3 catalysts by reduction of TiCl4 with Grignard reagents and their use for copolymerization of ethylene with propylene

Summary Preparations of soluble TiCl₃ catalysts by reduction of TiCl₄ with some types of Grignard reagents were carried out in halogenated hydrocarbon solvents by using appropriate ethers as donor. The soluble TiCl₃·MgX₂·ether complex catalysts and triisobutylaluminum as co-catalyst showed high activities for the copolymerization of ethylene with propylene. It was first found that the soluble TiCl₃·MgX₂·ether complex catalysts enhance the activities for the copolymerizations in the same manner as solid titanium catalysts supported on MgCl₂ which show high activities for homopolymerizations of olefin monomers. The copolymers obtained possessed low crystallinities. Also, the copolymers seem to contain microblock sequences and have outstandingly high tensile strength and elongation at break compared to copolymers by the conventional VOCl₃/Al(Et)_1.5Cl_1.5 catalyst system.     

Structural characterization of 1,2-polybutadiene by 13C n.m.r. spectroscopy: 1. Signal assignment in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were investigated in relation to the sequence distribution of 1,2- and 1,4-units. The signals at 10.20–10.94 ppm were assigned to the methyl carbons in the isolated 1,2-unit, the 1,2-1,2 dyad sequence flanked by 1,4-unit, and the 1,2-1,2-1,2 triad sequence, in order of increasing magnetic field. The splittings due to the configurational sequences were observed in the signals, reflecting the dyad and triad sequences of the 1,2-unit, which were assigned by considering the relative intensity of the signals and also the chemical shifts of model polymers.     

Heat Transfer Characteristics and Reynolds Stress Budget of Spatially Advancing Turbulent Flow in a Curved Channel

Direct numerical simulation was performed for the spatially advancing turbulent flow and heat transfer in a two-dimensional curved channel equating the radius ratio to 0.92 or 0.8. The frictional Reynolds number was fixed at 150, whereas the Prandtl number was set at 0.71. According to the numerical result, the remarkable enhancement of heat transfer occurred on the outer wall, suggesting the organized vortex activated the heat transfer. The budgets of Reynolds stresses clarified that the onset and growth of the organized flow was assisted by the direct energy transfer from the mean flow.     

Fast breeder reactor core concept for heterogeneous minor actinide loading

As an alternative method to the homogeneous minor actinide (MA) recycling in fast breeder reactors, a heterogeneous MA loading core concept using a highly concentrated americium (Am)-containing fuel (Am target) is proposed. By the use of an extraction process for Am and curium (Cm) in the reprocessing of the spent fuel, Am (and a small amount of Cm) can be recovered and then concentrated to produce the target. The Am content in the heavy metal is assumed to range from 10 to 20 wt% in accordance with the target development scope. A mixed oxide fuel that contains uranium, plutonium, and neptunium is chosen as the base material of the target, so that the targets can generate a level of power equivalent to that of the driver fuels. It was found that a ring-shaped arrangement of Am targets between the inner and outer core regions exhibits a favorable MA transmutation performance without any significant deterioration in the core neutronic characteristics, including increases of the burnup reactivity and sodium void reactivity worth, and decreases of the breeding ratio and absolute value of the Doppler coefficient, etc., in comparison with those of a reference homogeneous MA loading case. It should be noted that the Am targets in this loading arrangement can contribute to the suppression of the core power distribution change along with burnup. A series of core designs, including core neutronics, thermal hydraulics, and fuel integrity evaluations, was also carried out for a representative Am target loading case. The results indicate that it is possible to design an Am target subassembly that can cope with the issues presented by highly concentrated Am, i.e., the deterioration of thermophysical properties and the accumulation of helium gas inside the target fuel pins. Therefore, the design feasibility of the heterogeneous target loading core has been enhanced.     

Queuing Scheme for Improved Downlink Throughput on WLANs

A transmission queuing scheme is described that increases downlink throughput on wireless local area networks (WLANs) while also increasing the total throughput. When the amount of uplink traffic increases on a WLAN, the carrier sense multiple access with collision avoidance (CSMA/CA) protocol, which is the prescribed scheme for IEEE 802.11 WLAN channel access, may substantially reduce the rate of downlink data frame transmission. This results in severe throughput degradation for mobile stations with downlink traffic. The proposed scheme comprises a transmission control function based on consecutive transmission, as described in the IEEE 802.11e standard, and a dynamic queue prioritization algorithm. Simulation results demonstrate that the proposed scheme increases the maximum total throughput for uplink and downlink traffic by 17% compared with the conventional distributed coordination function (DCF) scheme and that it reduces the difference between uplink and downlink throughput. In an environment where transmission errors occur, the difference in throughput is reduced by about 50% compared with the conventional schemes.     

Analyses of used BWR fuel assay data with the integrated burnup code system SWAT4.0

Criticality safety of the fuel debris from the Fukushima Daiichi Nuclear Power Plant is one of the most important issues, and the adoption of burnup credit is desired for criticality safety evaluation. To adopt the burnup credit, validation of the burnup calculation codes is required. Assay data of the used nuclear fuel irradiated by the Fukushima Daini Nuclear Power Plant Unit 2 are evaluated to validate the SWAT4.0 code for solving the BWR fuel burnup problem. The calculation results revealed that the number densities of many heavy nuclides and fission products show good agreement with the experimental data, except for those of ²³⁷Np, ²³⁸Pu, and samarium isotopes. These differences were considered to originate from inappropriate assumption of void fraction. Our results implied overestimation of the (n, γ) cross-section of ²³⁷Np in JENDL-4.0. The Calculation/Experiment – 1 (C/E–1) value did not depend on the type of fuel rod (UO₂ or UO₂–Gd₂O₃), which was similar to the case of PWR fuel. The differences in the number densities of ²³⁵U, ²³⁹Pu, ²⁴⁰Pu, ²⁴¹Pu, ¹⁴⁹Sm, and ¹⁵¹Sm have a large impact on k_eff. However, the reactivity uncertainty related to the burnup analysis was less than 3%. These results indicate that SWAT4.0 appropriately analyzes the isotopic composition of BWR fuel, and it has sufficient accuracy to be adopted in the burnup credit evaluation of fuel debris.