Empirical surveys of frontier applications: a meta‐review

This contribution is the first attempt to systematically review all empirical surveys that so far have been made available in the broad field of efficiency and productivity analysis using frontier estimation methodologies. We provide a systematic bibliometric review on the many empirical surveys in the field of efficiency and productivity analysis, the most relevant concepts, areas, overlaps, and potentials to explore from its introduction to the most recent surveys. We combine the United Nations’ International Standard Industrial Classification (ISIC) taxonomy for the economic activity with the Journal of Economic Literature (JEL) classification system to classify the empirical surveys and to identify the current gaps in the literature. In addition to the most relevant/generic potential areas for applications (according to the United Nation's ISIC), this methodology provides a cluster analysis with the most relevant concepts that have been considered so far (according to the JEL codes). This overview brings an interesting guide for future work to develop the whole field.     

Polarization confocal microscopy and Congo Red fluorescence: a simple and rapid method to determine the mean cellulose fibril orientation in plants

The mean or net preferential orientation of cellulose fibrils in plant cell walls is detected with polarization confocal laser scanning microscopy using the fluorescence dichroism of Congo Red. Single cells, arrays of cells in a tissue, or the epidermis of whole organs can be assayed in vivo . Aerial parts require an extra pectinase treatment because of the cuticle, which is impermeable to aqueous solutions. Peeling off the epidermis can be an elegant alternative, especially for leaves. With this method the net preferential fibril orientation can be related to the symmetry axis of the cell in quantitative terms. Data issuing from this approach are useful in current research on plant biomechanics.     

New prediction model for failure of steel sheeting subject to concentrated load (web crippling) and bending

Current design rules for steel sheeting do not give adequate insight in the sheeting's structural behaviour and are not always accurate. The current rules use three concepts: ultimate bending moment; ultimate concentrated load; and interaction. This paper presents a new analytical model to predict the ultimate load of first-generation sheeting under practical loading conditions. These practical conditions are defined by the ratios between bending moment and concentrated load as occurring in practice. Comparisons between the new model and experiments indicate that the new model reaches approximately the same accuracy as the design rules. The new model provides more insight in the structural behaviour of the sheeting and uses only one concept for determining failure. The new model is based on two existing models. Namely an analytical model developed in 1995 by Vaessen (On the elastic web crippling stiffness of thin-walled cold-formed steel sections, Graduate Thesis TUE-BKO-95-17, Eindhoven University of Technology, The Netherlands) to predict the local web crippling deformation and a solution of Marguerre's (Zur Theorie der gekrümmter Platte grosser Formänderung. Proc. Fifth. Int. Congress Appl. Mech., p. 93) simultaneous differential plate equations included in a book by Murray (Introduction to the Theory of Thin-walled Structures, Oxford Engineering Science Series 13, Clarendon Press, Oxford).     

Predictor@Home: A "Protein Structure Prediction Supercomputer' Based on Global Computing

Predicting the structure of a protein from its amino acid sequence is a complex process, the understanding of which could be used to gain new insight into the nature of protein functions or provide targets for structure-based design of drugs to treat new and existing diseases. While protein structures can be accurately modeled using computational methods based on all-atom physics-based force fields including implicit solvation, these methods require extensive sampling of native-like protein conformations for successful prediction and, consequently, they are often limited by inadequate computing power. To address this problem, we developed Predictor@Home, a "structure prediction supercomputer” powered by the Berkeley Open Infrastructure for Network Computing (BOINC) framework and based on the global computing paradigm (i.e., volunteered computing resources interconnected to the Internet and owned by the public). In this paper, we describe the protocol we employed for protein structure prediction and its integration into a global computing architecture based on public resources. We show how Predictor@Home significantly improved our ability to predict protein structures by increasing our sampling capacity by one to two orders of magnitude.     

Immunogenicity and tolerability of a trivalent influenza subunit vaccine (Influvac) in high-risk children aged 6 months to 4 years

The authors carried out an epidemiological survey from october 12 to december 4, 1995, at Medina's mother and Child care centre (MCC) in Dakar in order to assess chemoprophylaxis among pregnant women in Dakar. The midwife/pregnant women ratio is 0.08 The mentioned diagnosis criteria were relevant regards to the references established for most of the answers because since the latter base malaria diagnosis on the following signs: fever, chills, headaches and vomiting. 64.6% of them assume compliance to antimalarial chemoporphylaxis. Education level seems to be the main determining factor in this trend. Although chloroquine is the most widely used drug, nevertheless 11.9% of pregnant women assuming compliance use it at inappropriate posology. Besides, pyrimethamine is used by 12.3% of them. 34% of pregnant women do show chloroquine in urine. The plasmodial index is 1.4%. Only 8.1% of these women are supplied by health centres where shortages are noted.     

Hydrogen adsorption studies in micro-size cobalt dots

Hydrogen desorption curves were obtained from a sample composed of a square arrangement of Co dots with average diameter of 4.4 μm, separated by a distance of 11.6 μm. A macroscopic sample of Co dots grown on a 2.5 × 2.5 cm Si substrate was made by standard lithographic techniques and used in these experiments. Thermal programmed desorption (TPD) was performed under ultra-high vacuum conditions. Hydrogen TPD curves were obtained from a 1 × 1 cm Co dots samples displaying a maximum of intensity at 425 K. Hydrogen TPD curve was also obtained from 1 cm× 1 cm samples of Co films and Co foils for comparison. The hydrogen TPD curves have decreasing intensity from the Co foils to the Co dots and finally to the Co films. This indicates that there are more sites for hydrogen adsorption on the Co dots than in the Co films. This is a surprising result because there is approximately 8.7 times less Co atoms exposed in the Co dots that in the Co film sample. A desorption energy of 27 kcal/mol was obtained for the Co dots suggesting that hydrogen is adsorbed on an hcp hollow site of the Co dot crystalline structure.     

Experimental study of a novel hybrid constructed wetland for water reuse and its application in Southern China

A new type of hybrid constructed wetland (CW), consisting of both vertical-baffled flow wetland (VBFW) and horizontal subsurface flow wetland (HSFW), has been deployed in Southern China to naturally accelerate the removal of organic matter and nitrogen. The hybrid CW system is characterised by a combination of continuous baffled flow vertical wetland and 'S' pattern horizontal subsurface flow wetland with natural aeration ditches to increase the concentration of dissolved oxygen in the HSFW bed. An internal circulatory system from the HSFW effluent back to the VBFW may optionally be operated to enhance the biological denitrification effect. Cyperus alternifolius is the main macrophyte in the wetland bed. The performance of the hybrid CW was studied with a pilot-scale system and three full-scale systems for municipal sewage treatment in Southern China. The results suggest that this new hybrid CW can achieve removal efficiencies of chemical oxygen demand, suspended solids, ammonia nitrogen, total nitrogen, and total phosphorus of better than 83.6, 95.0, 71.7, 64.5 and 68.1% respectively, with a specific wetland bed area of 0.70-0.93 m(2) PE(-1). The mean effluent concentrations of these parameters would meet the regulatory discharge limits for wastewater treatment systems (GB18918, 2002) and reuse in the context of agricultural irrigation solutions in China.     

Lateral Magnetically Modulated Multilayers by Combining Ion Implantation and Lithography

The combination of lithography and ion implantation is demonstrated to be a suitable method to prepare lateral multilayers. A laterally, compositionally, and magnetically modulated microscale pattern consisting of alternating Co (1.6 µm wide) and Co‐CoO (2.4 µm wide) lines has been obtained by oxygen ion implantation into a lithographically masked Au‐sandwiched Co thin film. Magnetoresistance along the lines (i.e., current and applied magnetic field are parallel to the lines) reveals an effective positive giant magnetoresistance (GMR) behavior at room temperature. Conversely, anisotropic magnetoresistance and GMR contributions are distinguished at low temperature (i.e., 10 K) since the O‐implanted areas become exchange coupled. This planar GMR is principally ascribed to the spatial modulation of coercivity in a spring‐magnet‐type configuration, which results in 180° Néel extrinsic domain walls at the Co/Co‐CoO interfaces. The versatility, in terms of pattern size, morphology, and composition adjustment, of this method offers a unique route to fabricate planar systems for, among others, spintronic research and applications.     

Preferentially oriented BaTiO3 thin films deposited on silicon with thin intermediate buffer layers

Barium titanate (BaTiO₃) thin films are prepared by conventional 2-methoxy ethanol-based chemical solution deposition. We report highly c-axis-oriented BaTiO₃ thin films grown on silicon substrates, coated with a lanthanum oxynitrate buffer layer of 8.9 nm. The influence of the intermediate buffer layer on the crystallization of BaTiO₃ film is investigated. The annealing temperature and buffer layer sintering conditions are optimized to obtain good crystal growth. X-ray diffraction measurements show the growth of highly oriented BaTiO₃ thin films having a single perovskite phase with tetragonal geometry. The scanning electron microscopy and atomic force microscopy studies indicate the presence of smooth, crack-free, uniform layers, with densely packed crystal grains on the silicon surface. A BaTiO₃ film of 150-nm thickness, deposited on a buffer layer of 7.2 nm, shows a dielectric constant of 270, remnant polarization (2P_r) of 5 μC/cm², and coercive field (E_c) of 60 kV/cm.