Functionalized-radiolabeled hydroxyapatite/tenorite nanoparticles as theranostic agents for osteosarcoma

Hydroxyapatite (HA) nanoparticles (NPs) doped with different radioisotopes for use as theranostic systems play an important role in scientific research nowadays due to their ability to simultaneously act in the treatment and diagnosis of various types of cancers. In this work, we describe the synthesis and characterization of a hydroxyapatite/tenorite nanocomposite functionalized with folic acid, representing a nanotheranostic material with potential for application as an agent in positron emission tomography imaging systems and to act specifically in the treatment and diagnosis of osteosarcoma. ⁶⁴Cu and ³²P were produced by nuclear activation in the TRIGA reactor at CDTN. The obtained samples were characterized by XRD with Rietveld refinement, XAFS, SEM, BET, TGA, FTIR, CHN, ICP-AES, XPS and gamma spectroscopy. We investigated how CuO grows in HA NPs, the stability of the interactions between CuO and HA constituents and the interactions between folic acid and the surface of the HA NPs. The results indicate the formation of a second phase (tenorite) besides hydroxyapatite, and that the interactions between the two phases are stable, resulting in a nanocomposite. Furthermore, the activation of ⁶⁴Cu and ³²P inside the HA matrix, through the exposition to a neutron flux, produces a theranostic material of interest for biological tests.     

Carbon fibers derived from UV‐assisted stabilization of wet‐spun polyacrylonitrile fibers

A rapid, dual‐stabilization route for the production of carbon fibers from polyacrylonitrile (PAN) precursor fibers is reported. A photoinitiator, 4,4′‐bis(diethylamino)benzophenone, was added to PAN solution before the fiber wet‐spinning step. After a short UV treatment that induced cyclization and crosslinking at a lower temperature, precursor fibers could be rapidly thermo‐oxidatively stabilized and successfully carbonized. Scanning electron microscopy micrographs show no deterioration of the microstructure or hollow‐core formation in the fibers due to UV treatment or presence of photoinitiator. Fast‐thermally stabilized pure PAN‐based carbon fibers show hollow‐core fiber defects due to inadequate thermal stabilization, but such defects were not observed in carbon fibers derived from fast‐thermally stabilized fibers that contained photoinitiator and were UV treated. Tensile testing results confirm that fibers containing 1 wt % photoinitiator and UV treated for 5 min display higher tensile modulus than all other sets of thermally stabilized and carbonized fibers. Wide‐angle X‐ray diffraction results show a higher development of the aromatic structure and molecular orientation in thermally stabilized fibers. No significant increase in interplanar spacing or decrease in crystals size were observed within the UV‐stabilized carbon fibers containing photoinitiator, but such fibers retain a higher extent of molecular orientation when compared with control fibers. These results establish for the first time, the positive effect of the external addition of photoinitiator and UV treatment on the properties of the PAN‐based fibers, and may be used to reduce the precursor stabilization time for faster carbon fiber production rate. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40623.     

A 1D High Performance Thin Layer Chromatography Method Validated to Quantify Phospholipids Including Cardiolipin and Monolysocardiolipin from Biological Samples

The aim of this study is to identify high performance thin layer chromatography (HPTLC) conditions allowing the separation and quantification of mammalian cellular phospholipids (PLs) (sphingomyelin, phosphatidylcholine, phosphatidylserine, phosphatidylinositol, phosphatidylethanolamine, and especially phosphatidic acid, cardiolipin, and monolysocardiolipin, these latter two being specifically located in mitochondria membranes). In order to make this method faster and easier, a 1D HPTLC method is chosen, testing several eluents as well as several staining methods. A pre‐conditioning of HPTLC plates with boric acid and a copper staining reagent followed by carbonization are selected for the quality of PL separation and homogeneity of staining. The selected conditions are discussed and the method validation is performed according to the International Conference on Harmonization guidelines. Linearity is effective between 1 and 8 µg and limit of quantification is between 0.5 and 2.3 µg depending on PL classes. Precision measurements show coefficients of variation <6%, and when amounts are close to the detection limit, <12%. Lipid extracts of tumor cell lines or isolated mitochondria are used to assess PL profiles. This shows that the HPTLC method can be used routinely to follow level variations of PLs. Practical Applications: The changes in PL composition play a crucial role in tumor processes and regulate cellular functions modulating cellular signaling or mitochondrial metabolism. The simple and cost‐effective 1D HPTLC method that is developed is applied to lipid extracts of whole tumor cells or hepatocyte‐isolated mitochondria. It is sensitive as well as precise to detect variations of phosphatidic acid or cardiolipin levels linked to physio‐pathological conditions. It can also be used to investigate the composition changes of other membrane PLs. Moreover, with a simultaneous analysis of 14 samples/standards on the same plate (six plates per day), this method is adapted for large series of samples.     

Carborane-Containing Matrix Metalloprotease (MMP) Ligands as Candidates for Boron Neutron-Capture Therapy (BNCT)

Based on the previously reported potent and selective sulfone hydroxamate inhibitors SC-76276, SC-78080 (SD-2590), and SC-77964, potent MMP inhibitors have been designed and synthesized to append a boron-rich carborane cluster by employing click chemistry to target tumor cells that are known to upregulate gelatinases. Docking against MMP-2 suggests binding involving the hydroxamate zinc-binding group, key H-bonds by the sulfone moiety with the peptide backbone residues Leu82 and Leu83, and a hydrophobic interaction with the deep P1’ pocket. The more potent of the two triazole regioisomers exhibits an IC₅₀ of 3.7 nM versus MMP-2 and IC₅₀ of 46 nM versus MMP-9.     

A Behavioral Model of MEMS Convective Accelerometers for the Evaluation of Design and Calibration Strategies at System Level

This paper presents a behavioral model that can be used to improve the manufacturability of systems based on MEMS convective sensors. This model permits to handle faults related to process scattering, taking into account not only the electrical and lateral geometrical parameters but also the influence of the cavity depth. Moreover correlations between conductive and convective phenomena are included. The model is validated with respect to FEM simulations and a very good agreement is obtained between the behavioral model and FEM results. The proposed model can then be used in system-level simulations, for instance to evaluate the impact of process scattering on the performances of the sensing part and/or to investigate different design and calibration strategies with respect to the system robustness.     

Emerging Planning Challenges in Retail: The Case of Wal-Mart

The future growth of the world's largest company hinges on its “supercenter” format, a bold evolution that made it the nation's largest grocer in a few short years. While proposals for big-box retail have long involved politically sensitive tradeoffs for planners, supercenters bring these into sharp focus by concentrating substantial wage impacts on one group, grocery workers. With much at stake—we estimate direct impacts of hundreds of millions of dollars on each side in the San Francisco region alone—these battles promise to be more intense and challenging than in the past. Yet many regulatory strategies are weakly rationalized, poorly targeted, and legally untested. We clarify key policy questions and offer a case study as a model for understanding the extent and character of expected tradeoffs between winners and losers. In the end, our analysis supports planning strategies explicitly aimed at mitigating costs while leveraging benefits. This will require a thorough assessment of each proposed store's costs and benefits in order to provide a clearer rationale for when super-centers should be approved, denied, or mitigated. Such an approach permits planners to do what they do best: inform, mediate, and resolve.     

Modelling and measurements of the velocity gradient and local flow direction at the pore scale of a packed bed

In a packed bed with single phase liquid flow, velocity gradient and local flow direction are measured at the pore scale using tri-segmented microelectrodes flush mounted at the surface of a sphere equator area. The experimental measurements are compared to numerical predictions deduced from the solution of a 3D model based on continuity and momentum balance equations.