Developing pressure sensors from impregnated textile sandwiched in inkjet-printed electrodes

Journal of Materials Science: Materials in Electronics - This work presents an interesting fabrication route toward development of pressure sensing patch by utilizing electrically conductive cotton...     

Combining a new baseboard radiator with a fan coil system for improving heating performance and reduce energy consumption

In the present work, the heating performance of a new system combined with a new modified baseboard radiator and fan coil is investigated. Using longitudinal fins with special geometry and also forced airflow at the end of the system causes that at the lower inlet water temperature compared with the conventional models, higher heat output rate be obtained. The heat output rate of the new modified system is obtained by experimental metrology based on the European Standard No. EN-442. Temperature and velocity distribution in the room space is done by simulation of the modified system in the Flovent software. Computational fluid dynamics (CFD) results are validated against experimental results and there is a good agreement between them. Also, the energy consumption of the system during the winter season is calculated in TRANSYS software. Experimental results show that the heat output rate of a new modified heating system with inlet water temperature in the range of 45–55°C is on average 4.17 times higher compared with the conventional model. CFD simulation also showed that the combined system provides good thermal comfort conditions. Energy consumption of the new system reduced about 13% compared with conventional models.     

Influence of radiation and viscous dissipation on MHD heat transfer Casson nanofluid flow along a nonlinear stretching surface with chemical reaction

The present article investigates the influence of Joule heating and chemical reaction on magneto Casson nanofluid phenomena in the occurrence of thermal radiation through a porous inclined stretching sheet. Consideration is extended to heat absorption/generation and viscous dissipation. The governing partial differential equations were transformed into nonlinear ordinary differential equations and numerically solved using the Implicit Finite Difference technique. The article analyses the effect of various physical flow parameters on velocity, heat, and mass transfer distributions. For the various involved parameters, the graphical and numerical outcomes are established. The analysis reveals that the enhancement of the radiation parameter increases the temperature and the chemical reaction parameter decreases the concentration profile. The empirical data presented were compared with previously published findings.     

MHD mixed convection of a Cu–water nanofluid flow through a channel with an open trapezoidal cavity and an elliptical obstacle

In the current work, numerical simulations are achieved to study the properties and the characteristics of fluid flow and heat transfer of (Cu–water) nanofluid under the magnetohydrodynamic effects in a horizontal rectangular canal with an open trapezoidal enclosure and an elliptical obstacle. The cavity lower wall is grooved and represents the heat source while the obstacle represents a stationary cold wall. On the other hand, the rest of the walls are considered adiabatic. The governing equations for this investigation are formulated, nondimensionalized, and then solved by Galerkin finite element approach. The numerical findings were examined across a wide range of Richardson number (0.1 ≤ Ri ≤ 10), Reynolds number (1 ≤ Re ≤ 125), Hartmann number (0 ≤ Ha ≤ 100), and volume fraction of nanofluid (0 ≤ φ ≤ 0.05). The current study's findings demonstrate that the flow strength increases inversely as the Reynolds number rises, which pushes the isotherms down to the lower part of the trapezoidal cavity. The Nu_avg rises as the Ri rise, the maximum Nu_avg = 10.345 at Ri = 10, Re = 50, ϕ = 0.05, and Ha = 0; however, it reduces with increasing Hartmann number. Also, it increase by increasing ϕ, at Ri = 10, the Nu_avg increased by 8.44% when the volume fraction of nanofluid increased from (ϕ = 0–0.05).     

A novel visible spectrum images-based pedestrian detection and tracking system for surveillance in non-controlled environments

Multimedia Tools and Applications - For many vision applications, robust detection and tracking of pedestrians in image sequences are essential. In this paper, a hybrid system for pedestrian...     

Hybrid marine predators algorithm for image segmentation: analysis and validations

Naturally, to analyze an image accurately, all the similar objects within it should be separated to pay attention to the most important object for reaching more details and hence achieving better accuracy. Therefore, multilevel thresholding is an indispensable image processing technique in the field of image segmentation and is employed widely to separate those similar objects. However, with increasing thresholds, the existing image segmentation techniques might suffer from exponentially-grown computational cost and low accuracy due to local optima shortage. Therefore, in this paper, a new image segmentation algorithm based on the improved marine predators algorithm (MPA) is proposed. MPA is improved using a strategy to find a number of the worst solutions within the population then tries to search for other better ones for those solutions by moving them gradually towards the best solutions to avoid accelerating to local optima and randomly within the search space based on a certain probability. In addition, this number of the worst solutions is increased with the iteration. This strategy is known as the linearly increased worst solutions improvement strategy (LIS). Also, we suggested that apply the ranking strategy based on a novel updating scheme, namely ranking-based updating strategy (RUS), on the solutions that could find better solutions in the last number iterations, perIter, in the hope of finding better solutions near it. RUS updates the particles/solutions which could not find better solutions than the best-local one in a number of consecutive iterations, with those that are generated based on a novel updating strategy. LIS is integrated with MPA to produce a new segmentation meta-heuristic algorithm abbreviated as MPALS. Also, MPALS and RUS are combined to tackle ISP in a strong variant abbreviated as HMPA for overcoming the image segmentation problem. The two proposed algorithms are validated on 14 test images and compared with seven state-of-the-arts meta-heuristic algorithms. The experimental results show the effectiveness of HMPA with increasing the threshold levels compared to the seven state-of-the-arts algorithms when segmenting an image, while their performance is roughly the same for the image with a small threshold level.

     

A hybrid GA and PSO optimized approach for heart-disease prediction based on random forest

Multimedia Tools and Applications - Nowadays, heart diseases are significantly contributing to deaths all over the world. Thus, heart-disease prediction has garnered considerable attention in the...     

Semi-blind channel estimation based on modified CMA and unitary scrambling for massive MIMO systems

Pilot contamination is one of the main impairments in multi-cell massive Multiple-Input Multiple-Output systems. In order to improve the channel estimation in this context, we propose to use a semi-blind channel estimator based on the constant modulus algorithm (CMA). We consider an enhanced version of the CMA namely the Modified CMA which modifies the cost function of the CMA algorithm to the sum of cost functions for real and imaginary parts. Due to pilot contamination, the channel estimator may estimate the channel of a contaminating user instead of that of the user of interest (the user for which the Base Station wants to estimate the channel and then the data). To avoid this, we propose to scramble the users sequences before transmission. We consider different methods to perform unitary scrambling based on rotating the transmitted symbols (one Dimensional (1-D) scrambling) and using unitary matrices (two-Dimensional (2-D) scrambling). At the base station, the received sequence of the user of interest is descrambled leading to a better convergence of the channel estimator. We also consider the case where the Automatic Repeat reQuest protocol is used. In this case, using scrambling leads to a significant gain in terms of BLock Error Rate due to the change of the contaminating users data from one transmission to another induced by scrambling.

     

On the Growth of Thin-Film AlGaN/GaN Epitaxial Heterostructures on Hybrid Substrates Containing Layers of Silicon Carbide and Porous Silicon

Semiconductors - Abstract—In our work, we carry out a structural-spectroscopic study of AlGaN/GaN epitaxial layers grown by molecular-beam epitaxy with nitrogen-plasma activation on a hybrid...     

Deep Learning Based Process Analytics Model for Predicting Type 2 Diabetes Mellitus

Process analytics is one of the popular research domains that advanced in the recent years. Process analytics encompasses identification, monitoring, and improvement of the processes through knowledge extraction from historical data. The evolution of Artificial Intelligence (AI)-enabled Electronic Health Records (EHRs) revolutionized the medical practice. Type 2 Diabetes Mellitus (T2DM) is a syndrome characterized by the lack of insulin secretion. If not diagnosed and managed at early stages, it may produce severe outcomes and at times, death too. Chronic Kidney Disease (CKD) and Coronary Heart Disease (CHD) are the most common, long-term and life-threatening diseases caused by T2DM. Therefore, it becomes inevitable to predict the risks of CKD and CHD in T2DM patients. The current research article presents automated Deep Learning (DL)-based Deep Neural Network (DNN) with Adagrad Optimization Algorithm i.e., DNN-AGOA model to predict CKD and CHD risks in T2DM patients. The paper proposes a risk prediction model for T2DM patients who may develop CKD or CHD. This model helps in alarming both T2DM patients and clinicians in advance. At first, the proposed DNN-AGOA model performs data preprocessing to improve the quality of data and make it compatible for further processing. Besides, a Deep Neural Network (DNN) is employed for feature extraction, after which sigmoid function is used for classification. Further, Adagrad optimizer is applied to improve the performance of DNN model. For experimental validation, benchmark medical datasets were used and the results were validated under several dimensions. The proposed model achieved a maximum precision of 93.99%, recall of 94.63%, specificity of 73.34%, accuracy of 92.58%, and F-score of 94.22%. The results attained through experimentation established that the proposed DNN-AGOA model has good prediction capability over other methods.