Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

A High-Throughput Screening System Based on Fluorescence-Activated Cell Sorting for the Directed Evolution of Chitinase A

Chitinases catalyze the degradation of chitin, a polymer of N-acetylglucosamine found in crustacean shells, insect cuticles, and fungal cell walls. There is great interest in the development of improved chitinases to address the environmental burden of chitin waste from the food processing industry as well as the potential medical, agricultural, and industrial uses of partially deacetylated chitin (chitosan) and its products (chito-oligosaccharides). The depolymerization of chitin can be achieved using chemical and physical treatments, but an enzymatic process would be more environmentally friendly and more sustainable. However, chitinases are slow-acting enzymes, limiting their biotechnological exploitation, although this can be overcome by molecular evolution approaches to enhance the features required for specific applications. The two main goals of this study were the development of a high-throughput screening system for chitinase activity (which could be extrapolated to other hydrolytic enzymes), and the deployment of this new method to select improved chitinase variants. We therefore cloned and expressed the Bacillus licheniformis DSM8785 chitinase A (chiA) gene in Escherichia coli BL21 (DE3) cells and generated a mutant library by error-prone PCR. We then developed a screening method based on fluorescence-activated cell sorting (FACS) using the model substrate 4-methylumbelliferyl β-d-N,N′,N″-triacetyl chitotrioside to identify improved enzymes. We prevented cross-talk between emulsion compartments caused by the hydrophobicity of 4-methylumbelliferone, the fluorescent product of the enzymatic reaction, by incorporating cyclodextrins into the aqueous phases. We also addressed the toxicity of long-term chiA expression in E. coli by limiting the reaction time. We identified 12 mutants containing 2–8 mutations per gene resulting in up to twofold higher activity than wild-type ChiA.     

Electric transport properties of rare earth doped YbxCa1-xMnO3 ceramics (part I: Optimization of ceramic processing)

A comprehensive study was performed in order to find the effect of different calcination and sintering conditions on the physical properties of calcium manganite ceramics in dependence of temperature T and partial pressure of oxygen p(O₂). The eventual formation of oxygen vacancies during sintering was investigated and the results were confirmed by monitoring the release of oxygen using a ZrO₂ oxygen sensor. The phase transition behavior was studied using thermogravimetric analysis (TGA) in a wide range of p(O₂) ≈ 10^?1 MPa down to 10^-19 MPa at high temperatures accompanied by dilatometry- and XRD-measurements. Furthermore, the present study reveals for the first time a way for reducing and preventing crack formation that may occur during sintering. The present systematic research provides essential fundamental information before performing electrical measurements necessary in order to understand important factors about charge carriers and electrical transport mechanism.     

Development and operation of Digital Twins for technical systems and services

Digital Twins are new solution elements to enable ongoing digital monitoring and active functional improvement of interconnected products, devices and machines. In addition, benefits of horizontal and vertical integration in manufacturing are targeted by the introduction of Digital Twins. Using the test environment of smart factory cells, this paper investigates methodological, technological, operative, and business aspects of developing and operating Digital Twins. The following Digital Twin dimensions are considered in scientific and application oriented analysis: (1) integration breadth, (2) connectivity modes, (3) update frequency, (4) CPS intelligence, (5) simulation capabilities, (6) digital model richness, (7) human interaction, and (8) product lifecycle. From this, design elements for the development of Digital Twins are derived and presented.     

Dishwashing behaviour of European consumers with regard to the acceptance of long programme cycles

Since the introduction of the energy label for household dishwashers in the EU, manufacturers have been incentivised to reduce resource consumption and increase the energy efficiency of their appliances. Technological progress has led to very efficient programmes with cleaning cycles of 3 to 4 h or longer. The European Commission recently initiated a revision of the energy label and Ecodesign requirements, leading to their adjustment to the state of the art and to actual usage patterns. The University of Bonn was tasked with investigating dishwashing habits in Europe. An online survey was conducted in 11 countries of the EU with more than 5000 participants. The survey focused on the choice of programme, attitudes towards energy-saving programmes and practices and the willingness to apply them. It appears that consumers are willing to apply energy-saving practices and to use energy-saving programmes, but the acceptance of long cycles that take more than 2 h is low, which stands in contradiction to the fact that 19% of all dishwashing cycles are run in the Eco programme, which takes more than 2 h in most cases. The percentage of people who understand that long cycles can be energy-efficient is smaller than the percentage of those who do not believe this. The statements of the participants are contradictory regarding the importance of saving energy and of programme duration. The results of the survey point out the importance of better consumer education and better communication by manufacturers, consumer organisations and legislation.     

Prediction of Glass Forming Ability Through High Throughput Calculation

In this work, high throughput calculation (HTC) is used to identify composition regions with good glass forming ability (GFA) in the Al-Cu-Zr, Cu-Ni-Zr, Cu-Ti-Zr, Cu-Ni-Ti-Zr, Al-Cu-Ni-Ti-Zr, Mg-Ca-Cu, and Mg-Ca-Ni systems. The predicted composition regions agree well with those observed by experiments in the ternary systems, while less satisfactory agreement is found in the Cu-Ni-Ti-Zr quaternary and the Al-Cu-Ni-Ti-Zr quinary systems. The possible causes that lead to the deviation in the higher order systems are discussed. The major advantage of the HTC method used in this study is that it is simple and can be easily applied to multicomponent systems. The color maps of liquidus temperature and solidification range obtained by HTC provide a valuable guidance to the experimentalists, thus they can focus on the composition regions with high potential of forming bulk metallic glasses, avoid unnecessary trial-and-error test and save time and cost. This approach can also be combined with other criteria to filter compositions with better GFA.     

Thermo-physical properties of Hastelloy X and Haynes 214 close to the melting range

ABSTRACT

The nickel-based superalloys Hastelloy X and Haynes 214 are widely used for honeycomb liners; however, thermo-physical properties at temperatures close to the melting range are poorly described in the literature. Based on the thermo-physical properties, endothermic effects between 550°C and 650°C have been observed that develop due to the formation of the short-range order in both alloys and in Haynes 214, in addition to the short-range order, an increase in the specific heat capacity due to the γ′-precipitation up to 950° was detected. At low and intermediate temperatures, the Hastelloy X is significantly better suited than the Haynes 214. At high temperatures the Haynes 214 is superior to the Hastelloy X due to the dissolution of the γ′-phase.     

A Step toward Molecular Evolution of RNA: Ribose Binds to Prebiotic Fatty Acid Membranes,and Nucleosides Bind Better than Individual Bases Do

A major challenge in understanding how biological cells arose on the early Earth is explaining how RNA and membranes originally colocalized. We propose that the building blocks of RNA (nucleobases and ribose) bound to self-assembled prebiotic membranes. We have previously demonstrated that the bases bind to membranes composed of a prebiotic fatty acid, but evidence for the binding of sugars has remained a technical challenge. Here, we used pulsed-field gradient NMR spectroscopy to demonstrate that ribose and other sugars bind to membranes of decanoic acid. Moreover, the binding of some bases is strongly enhanced when they are linked to ribose to form a nucleoside or – with the addition of phosphate – a nucleotide. This enhanced binding could have played a role in the molecular evolution leading to the production of RNA.     

Pinched Cord and Overdriven Staple Failures: Research on the Causation of an Electrical Fire

In the past, some fire investigators have determined the cause of a fire to be electrical in nature based, in part, on the presence of an electrical cord or cable found beneath a furniture leg or a cable wedged tightly under a staple. While fires resulting from these events are possible, the mechanisms that lead to these failures are poorly understood. In this paper, the results of four research projects are presented. The first three projects focused on the creation of a pinched cord failure under various current loads and pressures. In the last project, a typical nonmetallic-sheathed cable was damaged and then installed with an overdriven staple over the damaged location. In all tests, the cords and cables were subjected to current loads varying between 100 and 250% of the rated ampacity. The failure rate of pinched cords was approximately 1%, but required the use of overloaded circuits and pre-existing damage or special orientation of the cord under test. A critical factor worth considering with these failures, which is often not accounted for, is time. These failures may take weeks, months, or years to occur under normal conditions, although some investigators may assume they develop nearly instantaneously. The conditions of the circuit are also important, as the only way a failure developed in these tests was by operating the circuits in excess of their rated parameters.