OFDM peak power reduction with simple amplitude predistortion

In this paper, we propose a new peak-to-average power ratio (PAPR) reduction algorithm for OFDM transmission. The algorithm is based on simple amplitude predistortion of a subset of the input symbol blocks, the predistorted symbols being selected according to a metric which measures their contribution to the output signal samples of large. magnitude. This metric-based algorithm is simple, highly flexible, and can be implemented as a one-shot process, although its performance can be further improved by iterating the process one or more times.     

Potential of microbial growth control in water hydraulic systems by UV‐irradiation and filtration

Water hydraulic systems use water as a pressure medium and, thus, do not pose such adverse environmental impacts as oil hydraulics. Microbial deterioration of the pressure medium and biofouling of the surfaces restrict the applicability of the water‐based technology. The potential of microbial growth control by UV‐irradiation and filtration was studied in a pilot‐scale water hydraulic system. The UV‐irradiation (25 m Ws cm^?2) of the pressure medium reduced the total viable counts of bacteria by 1–2 log₁₀ cfu cm^?3, whereas the total microbial cell numbers and the numbers of surface‐attached microorganisms remained unaffected. Prefiltration (1.2 µm, absolute) of the pressure medium decreased the total microbial cell number in the water phase and retarded the attachment of bacteria. The filtration during the operation (2 µm, absolute) decreased the total numbers of microbial cells and the total viable counts in the pressure medium, and microbial attachment on the surfaces. Microbial attachment was not prevented by filtration. The microbial water quality obtained by pre‐ and on‐line filtration of the pressure medium was sufficient to ensure the long‐term operation of the water hydraulic system assuming that clean work practices are complied with in assembly and during the operation. © 2002 Society of Chemical Industry     

NMR imaging and differential scanning calorimetry study on drying of pine,birch, and reed pulps and their mixtures

Drying, water fractions, and water distribution were investigated for pine, birch, and reed pulps and pine–birch, pine–reed, and pine–birch–reed pulp mixtures. Gravimetrically determined drying times showed that the drying rates of the pulps decreased at two to four inflection points. Characterizations of the dried pulps by differential scanning calorimetry (DSC) showed a faster removal of free water than freezing and nonfreezing bound waters; all decreased simultaneously, however. DSC also revealed the critical water contents at which the free water and freezing bound water disappeared. The gravimetrically determined inflection points of the drying curves corresponded with the critical points determined by DSC. NMR line widths and images produced by ¹H‐NMR imaging revealed the nature and regions of the pulp drying. The constant growth rate of the NMR line widths with decreasing water content appeared to change at two inflection points, which fell approximately in the same water content regions as the inflection points of the drying curves. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 937–945, 2006     

Influences of 2.5wt% Mn addition on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys

The influences of 2.5wt%Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy(SMA) were studied by means of scanning electron microscopy(SEM),transmission electron microscopy(TEM),and differential scanning calorimeter(DSC).The experimental results show that Mn addition influences considerably the austenite-martensite transformation temperatures and the kind of martensite in the Cu-Al-Ni alloy.The martensitic transformation changes from a mixedβ_1→β'_1...     

Wet Chemical Treatment and Mg Doping of p-InP Surfaces for Ohmic Low-Resistive Metal Contacts

Manufacturing a low-resistive Ohmic metal contact on p-type InP crystals for various applications is a challenge because of the Fermi-level pinning via surface defects and the diffusion of p-type doping atoms in InP. Development of wet-chemistry treatments and nanoscale control of p-doping for InP surfaces is crucial for decreasing the device resistivity losses and durability problems. Herein, a proper combination of HCl-based solution immersion, which directly provides an unusual wet chemical-induced InP(100)c(2 × 2) atomic structure, and low-temperature Mg-surface doping of the cleaned InP before Ni-film deposition is demonstrated to decrease the contact resistivity of Ni/p-InP by the factor of 10 approximately as compared to the lowest reference value without Mg. Deposition of the Mg intermediate layer on p-InP and postheating of Mg/p-InP at 350 °C, both performed in ultrahigh-vacuum (UHV) chamber, lead to intermixing of Mg and InP elements according to X-ray photoelectron spectroscopy. Introducing a small oxygen gas background (O₂ ≈ 10⁻⁶ mbar) in UHV chamber during the postheating of Mg/p-InP enhances the indium outdiffusion and provides the lowest contact resistivity. Quantum mechanical simulations indicate that the presence of InP native oxide or/and metal indium alloy at the interface increases In diffusion.     

Dynamic programming based multi-stage optimization of shunt capacitors in radial distribution systems

Contents In this paper, a new optimal procedure of the general compensation problem is proposed, by minimizing the performance criterion depending on both active power and energy losses, and by taking into account cost of shunt capacitor banks and system voltage constraints. The new solution method represents a combinatorial searching procedure, with non-differentiable optimization criterion, by using the multi-stage optimization based on dynamic programming. The applications of the method to three different test system have shown important improvements in the sense of speed and effectiveness of calculations, when compared to previously advertised solution methods.

---

Mehrstufige Optimierung der Parallelkondensatoren in radialen Verteilungsnetzen mittels dynamisch Programmierung

Übersicht In diesem Artikel wird ein neues Verfahren für die allgemeine Blindleistungkompensation vrgestellt. Das Verfahren basiert auf der Minimierung der Optimalitätsbedingung, die Funktion der Wirkleistung und der Energieverluste ist. Die Kosten der Kondensatorbänke und die Betriebsgrenzen der Netzspannungen werden auch berücksichtigt. Die neue Methode stellt ein kombinatorisches Suchverfahren mit nicht-diffenzierbarer Optimalitätsbedingung dar. Dabei wird die mehrstufige Optimierung verwendet die auf der dynamischen Programmierung basiert. Die Bewertung der Methode mittels dreier Testnetze zeigt wichtige Verbesserungen bezüglich Schnelligkeit und Güte der Berechnung, im Vergleich zur früher veröffentlichten Methoden.

     

UX Curve: A method for evaluating long-term user experience

The goal of user experience design in industry is to improve customer satisfaction and loyalty through the utility, ease of use, and pleasure provided in the interaction with a product. So far, user experience studies have mostly focused on short-term evaluations and consequently on aspects relating to the initial adoption of new product designs. Nevertheless, the relationship between the user and the product evolves over long periods of time and the relevance of prolonged use for market success has been recently highlighted. In this paper, we argue for the cost-effective elicitation of longitudinal user experience data. We propose a method called the “UX Curve” which aims at assisting users in retrospectively reporting how and why their experience with a product has changed over time. The usefulness of the UX Curve method was assessed in a qualitative study with 20 mobile phone users. In particular, we investigated how users’ specific memories of their experiences with their mobile phones guide their behavior and their willingness to recommend the product to others. The results suggest that the UX Curve method enables users and researchers to determine the quality of long-term user experience and the influences that improve user experience over time or cause it to deteriorate. The method provided rich qualitative data and we found that an improving trend of perceived attractiveness of mobile phones was related to user satisfaction and willingness to recommend their phone to friends. This highlights that sustaining perceived attractiveness can be a differentiating factor in the user acceptance of personal interactive products such as mobile phones. The study suggests that the proposed method can be used as a straightforward tool for understanding the reasons why user experience improves or worsens in long-term product use and how these reasons relate to customer loyalty.     

Responses of the autonomic nervous system during periods of perceived high and low work stress in younger and older female teachers

The aim of this study was to examine the response of the autonomic nervous system in younger (mean age 31 yrs, n=14) and older (mean age 54 yrs, n=14) healthy female teachers during work periods of perceived high and low stress. In the younger participants, heart rate, cortisol excretion rate and psychosomatic symptoms were significantly higher during the high work stress period. The older participants experienced no decrease in their heart rate and cortisol excretion during the low stress period and they exhibited no significant decrease in blood pressure after the work in the evening during both periods. It may be concluded that the recovery from the stress in the older teachers was insufficient particularly in view of their elevated diastolic blood pressure during the low work stress period. Ergonomic and individually tailored measures in terms of work time control, specific relaxation techniques, and a part-time retirement may improve the stress management of older teachers.     

Impact of computer training courses on reduction of loneliness of older people in Finland and Slovenia

Previous research has shown loneliness as a threat for the quality of life of older people; therefore the goal of the intervention in a quasi-experimental study was to evaluate and discuss the self-reported level of loneliness of older people in Finland and Slovenia before and after a computer intervention. Intervention in a quasi-experimental study was conducted among 58 older participants at the baseline (M = 72.4 years) and 45 older participants at the follow-up research study (M = 72.9 years). Inferential statistics showed a significant difference in the reduction of loneliness between the countries, and a decreased level of loneliness of older people after completing the computer training course. Although older people experience many age-related problems which may reduce their interest in learning information and communication technology (ICT) skills, it is important that they are computer-proficient, because computer engagement can reduce the level of loneliness of older people and in this way has a positive effect on their quality of life.