Salt-assisted solution combustion synthesis of NiFe2O4: Effect of salt type

The effects of three types of salt including NaF, KCl, and NaCl on the properties of NiFe₂O₄ nanoparticles using salt-assisted solution combustion synthesis (SSCS) have been investigated. The synthesized powders were evaluated by SEM, TEM, FTIR, XRD, and VSM analysis. Also, the specific surface area (SSA), as well as size distribution and volume of the porosities of NiFe₂O₄ powders were determined by the BET apparatus. The visual observations showed that the intensity and time of combustion synthesis of nanoparticles have been severely influenced by the type of salt. The highest crystallinity was observed in the synthesized powder using NaCl. The SSA has also been correlated completely to the type of salt. The quantities of SSA was achieved about 91.62, 64.88, and 47.22 m²g^-1 for the powders synthesized by KCl, NaCl, and NaF respectively. Although the magnetic hysteresis loops showed the soft ferromagnetic behavior of the NiFe₂O₄ nanoparticles in all conditions, KCl salt could produce the particles with the least coercivity and remanent magnetization. Based on the present study, the salt type is a key parameter in the SSCS process for the preparation of spinel ferrites. Thermodynamic evaluation also showed that the melting point and heat capacity are important parameters for the proper selection of the salt.     

A privacy-preserving distributed transfer learning in activity recognition

Telecommunication Systems - Along with the widespread use of smartphones, activity recognition using embedded inertial sensors has intrigued researchers. The learning and employing activity...     

Electrodes based on nano-tree-like vanadium nitride and carbon nanotubes for micro-supercapacitors

Vanadium nitride(VN) was deposited by DC-sputtering on a vertically aligned carbon nanotube(CNTs)template for the purpose of nano-structuration. This led to the fabrication of hierarchically composite electrodes consisting of porous and nanostructured VN grown on vertically aligned CNTs in a nano-treelike configuration for micro-supercapacitor application. The electrodes show excellent performance with an areal capacitance as high as 37.5 m F cm~(-2) at a scan rate of 2 mV s~(-1) in a 0.5 MK_2SO_4 mild electrolyte solution. Furthermore, the capacitance decay was only 15% after 20,000 consecutive cycles. Moreover,the capacitance was found to increase with VN deposit thickness. The X-ray photoelectron spectroscopy analyses of the electrodes before and after cycling suggest that the oxide layers that form at the VN surface is the responsible for the redox energy storage in this material. Such electrodes can compete with other transition metal nitride based electrodes for micro-supercapacitors.     

Mixed matrix membranes on the basis of Matrimid and palladium-zeolitic imidazolate framework for hydrogen separation

Iranian Polymer Journal - Gas separation membranes with enhanced performance were developed by the introduction of nanosized palladium particles. In this study, gas separation performance of...     

A low pressure SWCNT-ENM sandwich membrane system for the removal of PPCPs from water

While carbon nanotubes are known as efficient adsorbents for removal of a number of contaminants from water, the possibility of their leaching into drinking water has prevented their application in water treatment. In this study, single walled carbon nanotubes (SWCNT) were sandwiched between two electrospun nanofibre membranes (ENM). The relatively small pore size of the ENM prevented the mechanically entangled nanotubes from passing through and contaminating the water. The performance of the SWCNT-ENM was evaluated in a lab-scale setup for the removal of PPCPs. For this purpose, a feed solution spiked with known concentrations of six PPCPs was passed through the membrane system. The target substances included acetaminophen (ACT), bezafibrate (BZF), iopromide (IOP), diclofenac (DCF), carbamazepine (CBZ), and sulphamethoxazole (SMX). The same test was also conducted using a single contaminant (ACT). Results demonstrated a decrease in the overall percent removal of PPCPs as feed flow rate and PPCP concentration increased. For multi-component feeds containing equal amounts of the aforementioned PPCPs, the overall percent removal decreased from 90.8% to 71.0% when increasing the feed concentration from 30 to 600 μg/L. Experiments using sandwiched powdered activated carbon (PAC) showed that the dynamic adsorption capacity of PPCPs by SWCNT-ENM was higher than that of PAC-ENM, and remained unaffected by the feed composition. In addition, the high porosity of this novel membrane allowed for flow of water with low resistance such that the trans-membrane pressure was found to be as low as 4 kPa at a pure water flux of 330 L/m²h.     

Improving the performance of novel polysulfone-based membrane via sulfonation method: Application to water desalination

High-performance polymers for water desalination were designed. A novel polysulfone was prepared via reaction between a new synthesized pyridine-based diol and bis(4-fluorophenyl) sulfone. Also a series of disulfonated copolymers with sulfonation content of 20–50 wt% were prepared to compare the hydrophilicity with the pristine polymer. The generated membranes were characterized by microscopic, mechanical, and thermal methods, and the influence of sulfonation degree on hydrophilicity, water flux, and salt rejection was followed. Water flux of sulfonated membranes was increased compare to pristine membrane as sulfonation increased, while the salt rejection decreased. Optimum application performance was obtained for membrane with 30 wt% sulfonation content. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48568.     

Biologization of Pcl-Mesh Using Platelet Rich Fibrin (Prf) Enhances Its Regenerative Potential In Vitro

Introduction: Resorbable synthetic scaffolds are promising for different indications, especially in the context of bone regeneration. However, they require additional biological components to enhance their osteogenic potential. In addition to different cell types, autologous blood-derived matrices offer many advantages to enhance the regenerative capacity of biomaterials. The present study aimed to analyze whether biologization of a PCL-mesh coated using differently centrifuged Platelet rich fibrin (PRF) matrices will have a positive influence on primary human osteoblasts activity in vitro. A polymeric resorbable scaffold (Osteomesh, Osteopore^TM (OP), Singapore) was combined with differently centrifuged PRF matrices to evaluate the additional influence of this biologization concept on bone regeneration in vitro. Peripheral blood of three healthy donors was used to gain PRF matrices centrifuged either at High (710× g, 8 min) or Low (44× g, 8 min) relative centrifugal force (RCF) according to the low speed centrifugation concept (LSCC). OP-PRF constructs were cultured with pOBs. POBs cultured on the uncoated OP served as a control. After three and seven days of cultivation, cell culture supernatants were collected to analyze the pOBs activity by determining the concentrations of VEGF, TGF-β1, PDGF, OPG, IL-8, and ALP- activity. Immunofluorescence staining was used to evaluate the Osteopontin expression of pOBs. After three days, the group of OP+PRF_Low+pOBs showed significantly higher expression of IL-8, TGF-ß1, PDGF, and VEGF compared to the group of OP+PRF_High+pOBs and OP+pOBs. Similar results were observed on day 7. Moreover, OP+PRF_Low+pOBs exhibited significantly higher activity of ALP compared to OP+PRF_High+pOBs and OP+pOBs. Immunofluorescence staining showed a higher number of pOBs adherent to OP+PRF_Low+pOBs compared to the groups OP+PRF_High+pOBs and OP+pOBs. To the best of our knowledge, this study is the first to investigate the osteoblasts activity when cultured on a PRF-coated PCL-mesh in vitro. The presented results suggest that PRF_Low centrifuged according to LSCC exhibits autologous blood cells and growth factors, seem to have a significant effect on osteogenesis. Thereby, the combination of OP with PRF_Low showed promising results to support bone regeneration. Further in vivo studies are required to verify the results and carry out potential results for clinical translation.     

A new selfish thing detection method based on Voronoi diagram for Internet of Things

The Journal of Supercomputing - Internet of Things (IoT), as an emerging technology, describes a smart world that enables objects to interact with each other and with end-users through developed...     

Deep-Learning Based DOA Estimation in the Presence of Multiplicative Noise

Wireless Personal Communications - The paper addresses the narrowband direction of arrival estimation problem in the presence of multiplicative noise, namely, the local scatterers affect the...