Impact of high-intensity ultrasound on physical properties and degree of oxidation of lipase modified menhaden oil with caprylic acid and/or stearic acid

The purpose of this research was to determine the effect of high-intensity ultrasound (HIU) on physical properties, degree of oxidation, and oxidative stability of structured lipids (SLs). Caprylic acid (C) and stearic acid (S) were incorporated into menhaden oil using Lipozyme® 435 lipase to obtain five samples: (1) LC 20 (menhaden oil with 20% of C), (2) LC 30 (menhaden oil with 30% C), (3) LS 20 (menhaden oil with 20% S), (4) LS 30 (menhaden oil with 30% S), and (5) Blend C (menhaden oil with 16.24% C and 13.04% S). Samples were crystallized for 90 min at the following temperatures: (1) LC 20 at 15.5°C, (2) LC 30 at 17.5°C, (3) LS 20 at 24°C, (4) LS 30 at 30°C, and (5) Blend C at 18.0°C, and HIU was applied at the onset of crystallization. Physical properties, degree of oxidation, and oxidative stability were evaluated in sonicated and nonsonicated samples. All SLs had statistically higher G′ after sonication. Sonicated LS 30, LC 30, and Blend C had a higher melting enthalpy than the nonsonicated ones, while enthalpy values in sonicated LS 20 and LC 20 samples were not statistically different than the nonsonicated ones. No significant difference between sonicated and nonsonicated samples was observed in peroxide values (1.2 ± 0.1 meq/kg, p > 0.05) and in the oxidative stability index (6.3 ± 0.2 h, p > 0.05). These results showed that HIU was effective at changing physical properties without affecting the oxidation of the samples.     

A NEW APPROACH FOR THE CLASSIFICATION AND ENUMERATION OF UNIQUE REACTION ROUTES AND UNIQUE OVERALL REACTIONS IN MULTIPLE CHEMICAL REACTION SYSTEMS

The methodology of response reactions (RERs) introduced earlier from thermodynamic and kinetic considerations is used in this work to develop a new algorithm for the classification and enumeration of unique/direct reaction routes (RRs) and overall reactions (ORs). According to the RERs approach, a unique set of both RRs and ORs may be generated starting from any conceivable set of linearly independent RRs and ORs. In particular, the direct ORs may be most conveniently enumerated starting from the formula matrix of the terminal species (reactants and products), i.e., without any relation to the elementary reactions comprising the detailed mechanism. Depending on the type of ORs produced by the RRs one can distinguish between two distinct types of direct RRs. Namely, one option is to define a direct RR by specifying the intermediate species that need to be eliminated. This type of RR is referred to as Milner RRs. The other option is to require the direct RRs to produce RERs, thus resulting in RRs referred to as Happel-Sellers RRs.     

Immersive electronic books for surgical training

Immersive electronic books (IEBooks) for surgical training will let surgeons explore previous surgical procedures in 3D. The authors describe the techniques and tools for creating a preliminary IEBook, embodying some of the basic concepts.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Binary and m-ary encoding in applications of tree-based genetic algorithms for QoS routing

Ubiquitous and Pervasive Computing (UPC) applications often have Quality of Service (QoS) requirements. These become constraints for the UPC network infrastructure. In this paper, we refer to Mobile ad Hoc Networks, one of the most important technologies supporting UPC, and investigate on Genetic Algorithms (GAs) for QoS routing. GAs are part of the soft computing paradigm and can solve the NP search of QoS routes with multiple constraints. We elaborate on tree-based GAs, which represent the set of paths from source to destination as a tree and encode them through the crossed junctions. While their most well-known applications use m-ary encoding representing single paths in the chromosomes, in this paper we discuss a binary encoding with the objective of improving the convergence speed. The binary encoding represents classes of paths in the chromosomes and allows local search on classes of paths. These classes are both collectively exhaustive and mutually exclusive. Simulation results compare convergence speed and scalability of GA applications with binary and m-ary encoding in networks with an increasing number of nodes and links per node. As the per-class processing is reason of additional computational cost, an hybrid GA application that uses both binary and m-ary encoding is introduced.     

<Emphasis Type="Italic">In situ</Emphasis> monitoring of solid fat content by means of pulsed nuclear magnetic resonance spectrometry and ultrasonics

An ultrasonic technique was developed to study the crystallization process of edible fats on-line. A chirp wave was used instead of the conventional pulser signal, thus achieving a higher signal-to-noise ratio. This enabled measurements to be made in concentrated systems [≈20% solid fat content (SFC)] through a 8.11-cm thick sample without significant signal loss. Fat samples were crystallized at 20, 25, and 30°C at a constant agitation rate of 400 rpm for 90 min. The crystallization process was followed by ultrasonic spectroscopy and a low-resolution pulsed nuclear magnetic resonance spectrometer. Specific relationships were found between ultrasonic parameters [integrated response, time of flight (TF), and full width half maximum] and SFC. TF, which is an indirect measurement of the ultrasonic velocity (v), was highly correlated to SFC (r ²>0.9) in a linear fashion (v=2.601 SFC+1433.0).     

Animatronic shader lamps avatars

Applications such as telepresence and training involve the display of real or synthetic humans to multiple viewers. When attempting to render the humans with conventional displays, non-verbal cues such as head pose, gaze direction, body posture, and facial expression are difficult to convey correctly to all viewers. In addition, a framed image of a human conveys only a limited physical sense of presence—primarily through the display’s location. While progress continues on articulated robots that mimic humans, the focus has been on the motion and behavior of the robots rather than on their appearance. We introduce a new approach for robotic avatars of real people: the use of cameras and projectors to capture and map both the dynamic motion and the appearance of a real person onto a humanoid animatronic model. We call these devices animatronic Shader Lamps Avatars (SLA). We present a proof-of-concept prototype comprised of a camera, a tracking system, a digital projector, and a life-sized styrofoam head mounted on a pan-tilt unit. The system captures imagery of a moving, talking user and maps the appearance and motion onto the animatronic SLA, delivering a dynamic, real-time representation of the user to multiple viewers.     

Distance functions and skeletal representations of rigid and non-rigid planar shapes

Shape skeletons are fundamental concepts for describing the shape of geometric objects, and have found a variety of applications in a number of areas where geometry plays an important role. Two types of skeletons commonly used in geometric computations are the straight skeleton of a (linear) polygon, and the medial axis of a bounded set of points in the k-dimensional Euclidean space. However, exact computation of these skeletons of even fairly simple planar shapes remains an open problem.In this paper we propose a novel approach to construct exact or approximate (continuous) distance functions and the associated skeletal representations (a skeleton and the corresponding radius function) for solid 2D semi-analytic sets that can be either rigid or undergoing topological deformations. Our approach relies on computing constructive representations of shapes with R-functions that operate on real-valued halfspaces as logic operations. We use our approximate distance functions to define a new type of skeleton, i.e, the C-skeleton, which is piecewise linear for polygonal domains, generalizes naturally to planar and spatial domains with curved boundaries, and has attractive properties. We also show that the exact distance functions allow us to compute the medial axis of any closed, bounded and regular planar domain. Importantly, our approach can generate the medial axis, the straight skeleton, and the C-skeleton of possibly deformable shapes within the same formulation, extends naturally to 3D, and can be used in a variety of applications such as skeleton-based shape editing and adaptive motion planning.     

Managing Workflow Authorization Constraints through Active Database Technology

The execution of workflow processes requires authorizations for enforcing the assignment of tasks to agents, either human or automated, according to the security policy of the organization. This paper presents a workflow authorization framework based on roles and organizational levels, and on authorization constraints. To facilitate the assignment of tasks to agents, roles and organizational levels are organized into hierarchies. Authorization constraints are introduced to specify instance-dependent, time-dependent, and history-dependent authorizations. Authorization constraints are specified in terms of active rules, used also for authorization management. The Workflow Management System determines authorized agents on the basis of the contents of an authorization base maintained through the active rules defined in the system.     

Subsumptive general solutions and parametric general solutions of Post equations

In this paper we generalize Rudeanu’s results from [13] to Post algebras. We give a necessary and sufficient condition for the existence of a Post function f such that the set of solutions of equation f(x) = 0 is a given interval. We also prove that every Post transformation is the parametric solution of some consistent Post equation.