A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

Plastic Analysis of Braced Frames by Application of Metaheuristic Optimization Algorithms

The plastic analysis of moment frames by the combination of elementary mechanisms is one of the classic problems in the field of nonlinear analysis of stru     

Leaching of a zinc ore and concentrate using the Geocoat™ technology

In this study, the Geocoat™ technology was used for the extraction of zinc from a mineral concentrate obtained from the Kooshk mine (Yazd, Iran) by a culture dominated by the mesophilic bacterium Acidithiobacillusferrooxidans in a packed column bioreactor. A low grade sphalerite ore was used as support for the concentrate coating. During the 100 days of leaching pH, Fe³⁺, Fe^total, microbial population density and zinc extraction were measured. The final zinc extraction from concentrate and low grade support was 97% and 78%, respectively, and it was found that leaching from the support does not proceed significantly before leaching from the coating is completed.     

A collaborative approach for urban underground space development toward sustainable development goals: Critical dimensions and future directions

The utilization of urban underground space (UUS) offers an effective solution to urban problems but may also negatively affect urban development. Therefore, UUS development needs better concerted guidelines to coordinate various urban systems and the multiple components of the underground world. Sustainable Development Goals (SDGs), which should be viewed as important yardsticks for UUS development, do not explicitly mention urban underground space, although many of them are affected by both the positive and negative consequences of its development. To fill this gap, this review lays the foundations of relevant UUS concepts and uses exemplary cases to reveal that 11 out of 17 SDGs can be linked with UUS uses. These linkages also manifest that land administration, integrated planning, architectural design, and construction technology are critical dimensions for increasing the contributions of UUS to the realization of SDGs. To achieve multi-disciplinary synergies among these four critical dimensions, a collaborative approach framework based on spatial data infrastructure is required. Thus, this work provides academics and practitioners with a holistic view of sustainable UUS development.     

Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite

Fiber-reinforced concrete (FRC) has been used in structural applications in order to enhance the structural performance under dynamic loading and reduce cracking and spalling phenomena by increasing toughness, ductility, and tensile strength of the concrete. High-performance fiber-reinforced cement based composite (HPFRC) is a high-strength FRC with enhanced high-performance characteristics. Recent studies have shown that HPFRC has higher impact resistance than other types of concrete. Therefore, it has been widely considered as a promising material for the construction of important and strategic structures. HPFRC panels are tested by drop projectiles up to an impact at which failure occurs. Mechanical properties of HPFRC are obtained to define material parameters in the MAT_SOIL_CONCRETE model in LS-DYNA, which is used to simulate the behavior of HPFRC panel under impact loading and perform parametric studies. Predicted crack and failure patterns on both sides of the HPFRC panel based on finite element simulation are in good agreement with their corresponding experimental results.     

Application of a fuzzy TOPSIS method base on modified preference ratio and fuzzy distance measurement in assessment of traffic police centers performance

In this paper we have presented a TOPSIS approach based on preference ratio and an efficient fuzzy distance measurement for a Fuzzy Multiple Criteria Group Decision-Making Problem (FMCGDMP). Preference ratio with a moderate modification for negative fuzzy numbers was used as an efficient ranking method for fuzzy numbers in a relative manner. As human reasoning persuades that distances between two fuzzy numbers should be a fuzzy measure, so all distances between fuzzy numbers (i.e. distances between alternatives, Fuzzy Positive Ideal solutions, and Fuzzy Negative Ideal solutions) have been calculated as fuzzy numbers using an efficient fuzzy distance measurement. The aforementioned arguments make the proposed algorithm unique and well posed for real-life problem modeling. Moreover, the main novelties of the proposed procedure (i.e. the fuzzy distance measurement and Preference Ratio) have been developed for Generalized Fuzzy Numbers (GFNs). The proposed algorithm has efficiently been applied in assessment of traffic police centers which is treated as a FMCGDMP.     

A new reactor concept for combining oxidative coupling and steam re‐forming of methane: modeling and analysis

A new and very promising application of auto‐thermal reactors is the coupling of endothermic and exothermic reactions where the product of the endothermic reaction is the desired one. Therefore, in this work, a reactor in which oxidative coupling of methane (OCM) and steam re‐forming of methane (SRM) reactions take place simultaneously was modeled. The results were obtained in a wide range of different conditions such as inlet feed, inlet temperature, portions of OCM and SRM catalysts, and inlet velocity. In selection of the catalysts, more attention was drawn to prevent re‐forming of OCM products. The main parameters of each reaction under different conditions such as conversion of the feed components, products selectivity and yield, temperature in the length of reactor, and component's concentration in the reactor were considered in course of this study. The results revealed that simultaneous OCM and SRM reactions in one reactor will tend to be auto‐thermal, and the waste of energy will be reduced. The results also show that complete conversion of water and majority of methane and oxygen will decrease the amount of unwanted products at the reactor's discharge–a constraint that exists in single reactors of each reaction specially OCM. Copyright © 2011 John Wiley & Sons, Ltd.     

Discussion on “Enhancement of combined heat and power economic dispatch using self adaptive real-coded genetic algorithm,by P. Subbaraj et al., Applied Energy 86 (2009) 915–921.”

The paper studied by Subbaraj et al. (2009) considers the feasibility of using self adaptive real-coded genetic algorithm for enhancement of combined heat and power economic dispatch. The paper includes some problems about the considered feasible operating region. In this discussion, the controversial point of the paper are given.