Manipulation of thick-walled PEEK bushing crystallinity and modulus via instrumented compression molding

An instrumented hot compression molding apparatus was fabricated to allow real-time monitoring and precise temperature control during the compaction and consolidation of large polyether ether ketone (PEEK) products. The objective was to determine the impact of controlled variables on the properties of the molded article. Four different strategies were designed to control the mold thermal profiles. The average crystallinity in a commercial molding process is restricted due to large thermal masses with low thermal conductivity. In contrast, this research was able to reduce the crystallinity range from 33% to 6% by developing a special controlled apparatus and implementing new processing methodologies. In this study, PEEK showed a significant increase in the modulus compared to typical values measured on commercially produced analogs, and a higher degree of property uniformity. In a single commercially molded PEEK billet, compressive modulus variability was 13% at room temperature, and 21% at 225°C. Properties of billets produced using the laboratory apparatus showed a reduction in variability to 2%.     

Cocaine Induces Cytoskeletal Changes in Cardiac Myocytes: Implications for Cardiac Morphology

Cocaine is one of the most widely abused illicit drugs worldwide and has long been recognised as an agent of cardiac dysfunction in numerous cases of drug overdose. Cocaine has previously been shown to up-regulate cytoskeletal rearrangements and morphological changes in numerous tissues; however, previous literature observes such changes primarily in clinical case reports and addiction studies. An investigation into the fundamental cytoskeletal parameters of migration, adhesion and proliferation were studied to determine the cytoskeletal and cytotoxic basis of cocaine in cardiac cells. Treatment of cardiac myocytes with cocaine increased cell migration and adhesion (p < 0.05), with no effect on cell proliferation, except with higher doses eliciting (1–10 μg/mL) its diminution and increase in cell death. Cocaine downregulated phosphorylation of cofilin, decreased expression of adhesion modulators (integrin-β3) and increased expression of ezirin within three hours of 1 μg/mL treatments. These functional responses were associated with changes in cellular morphology, including alterations in membrane stability and a stellate-like phenotype with less compaction between cells. Higher dose treatments of cocaine (5–10 μg/mL) were associated with significant cardiomyocyte cell death (p < 0.05) and loss of cellular architecture. These results highlight the importance of cocaine in mediating cardiomyocyte function and cytotoxicity associated with the possible loss of intercellular contacts required to maintain normal cell viability, with implications for cardiotoxicity relating to hypertrophy and fibrogenesis.     

Effect of long-chain branching molar fraction on scratch behavior of polypropylene

Polymers containing a certain amount of long-chain-branching (LCB) structure are expected to possess improved mechanical properties over those of the linear structure counterpart. However, fundamental knowledge on the structure–property relationship in LCB containing polypropylene (PP) is still illusive. In the present study, a set of model PP systems containing an increasing molar fraction of LCB (5–19 mol%) were prepared by reactive extrusion to determine how LCB content may influence the scratch behavior of PP. It is shown that with only 5 mol% of LCB content in PP can improve resistance against scratch-induced fish-scale formation by over 25%. The improvement of scratch resistance is attributed to the increases in entanglement density in LCB-containing PPs, which is evidenced by their creep-recovery behavior. The present study demonstrates that the incorporation of LCB in PP leads to higher viscoelastic recovery and increased tensile strength, which account for the observed improvement in scratch performance. The usefulness of LCB in polymers for improving scratch performance is discussed.     

Reality-based interaction affecting mental workload in virtual reality mental arithmetic training

ABSTRACT

The concept of digital game-based learning (DGBL) evolves rapidly together with technological enhancements of virtual reality (VR) and smart phones. However, the mental workload (MWL) that VR-training applications demand and motivational qualities originating from user experience (UX) should be identified in order to create effective and enjoyable training/learning challenges that fit with individual users’ capabilities. This study examined the effects of reality-based interaction (RBI) and VR on measures of student motivation and MWL, in a mental arithmetic game for secondary school pupils. In a randomised controlled trial with sixty school children, a mental arithmetic game was tested with three different interaction and two different presentation methods – VR RBI, VR head-mounted-display tapping and tablet flick-gesture. Results found a significant effect of RBI on MWL but no differences in enjoyment of training were found between VR-experience and tablet training-experience. In fact, adding the gaming-context to the mental arithmetic task created an enjoyable, motivating experience regardless of presentation or interaction-style.     

The influence of processing conditions on the mechanical properties of poly(aryl-ether-ketone)/polybenzimidazole blends

Interest in developing high-performance blends for niche applications has grown significantly in efforts to meet ever-increasing harsh environment demands. In this work, four model poly(aryl-ether-ketone)/polybenzimidazole (PAEK/PBI) blends were chosen to study the influence of premixing methods, processing, and matrix polymers, on their mechanical properties. Among the model poly(ether ether ketone) (PEEK) and PBI blends, mechanical properties are greatly enhanced by melt premixing. The molding process mainly affects the matrix crystallinity, which in turn greatly influences fracture toughness of the blend. Poly(ether ketone ketone) (PEKK) and PBI blend exhibits a slightly lower tensile strength and fracture toughness than PEEK/PBI due to the differences in inherent properties of PEEK and PEKK matrices and their interfacial interaction with PBI. The processing−structure–property relationship of PAEK/PBI blends is established to help guide optimal design of high-performance polymer blends for structural applications. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48966.     

材料、技术和创新

熟练地应用在建筑材料和技术进步方面所积累的知识能够帮助人们灵活运用材料和技术，进而为市民设计活动场所。与先进的建造技术结合，把不同的建设材料视为景观的构成系统和独立要素进行研究和掌握有利于在工程项目中加以利用。对建材和技术创新应用得比较好的例子之一是在建筑物上建造开阔的城市花园和公共空间。为此，欧林事务所开发和不断改进景观构成系统，虽然大部分不为使用者所见，却保证了混凝土的建筑结构之上的绿化茂盛的景观。此外，欧林事务所又研究和开发了一些新技术。利用浇注玻璃和压层玻璃作为室外景观的结构材料。景观设计工作在客户的需求、材料和技术中创造革新，也需要通过支持平凡的独特性，来创造持久、美观而实用的景观场所。     

Characterization and Properties of Layered Silicate Reinforced Spent DuraForm EX Nanocomposites

During the last decade, the nanocomposites based on layered silicate are widely studied and attracted the industrial and academic research. The effect of various loading levels of layered silicate reinforcement on the mechanical and thermal properties was studied by nano-indentation, flexural testing, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The maximum hardness (H), increased from 67 MPa for neat Spent DuraForm EX up to 170 MPa with 7 wt.% layered silicate-reinforced sample. The measured modulus (E), of unreinforced Spent DuraForm increased from 631 MPa to 2100 MPa with 7 wt.% layered silicate reinforcement. The thermal property of the EX nanocomposites revealed by DSC was improved by about 6?C up to 7 wt.% of layered silicate loading. Different levels of layered silicates dispersion as characterized using TEM and SEM correlated strongly with improvements in nanohardness and thermal properties. The improved hardness, modulus, crystalline and melting temperatures of Spent DuraForm EX nanocomposites are attributed mainly to the intercalated structures.     

Microwave and pulsed electric field assisted extractions of polyphenols from defatted canola seed cake

The incorporation of microwave and pulsed electric field (PEF) technologies in optimising the extraction of polyphenols from defatted canola seed cake was determined by Box‐Behnken response surface methodology, using three parameters of microwave treatment (power, time and liquid: solid (L:S) ratio) and four parameters of PEF (ethanol concentration, time, frequency and voltage). After microwave and PEF pretreatments, the polyphenols of defatted canola seed cake were extracted by ultrasound treatment under fixed variables (200 W of ultrasonic power, 70 °C of water bath and 20 min of extraction time). The measured responses were total phenolics, total flavonoids, the DPPH˙ scavenging activity and ferric reducing antioxidant power (FRAP). The maximum yields of all responses were achieved under optimum conditions of microwave processing (5 min, L:S ratio of 6.0 and 633.3 W) and PEF‐assisted extraction (30 V, 30 Hz, 10% ethanol concentration and 10 s).     

The incorporation of low-substituted hydroxypropyl cellulose into solid dispersion systems

While the use of amorphous solid dispersions to improve aqueous solubility is well documented, little consideration has traditionally been given to the finished dosage form. The objective of this study was to evaluate the dissolution performance of amorphous solid dispersions containing a dispersed superdisintegrant with binding properties. KinetiSol® dispersing was used to thermally process hypromellose acetate succinate-based compositions containing the drug substance nifedipine (NIF) and a highly compressible grade of low-substituted hydroxypropyl cellulose (New Binder Disintegrants; NBD-grade). Solid-state analysis demonstrated that compositions were rendered amorphous during processing. Tablets containing intra-dispersion NBD were found to exhibit non-sink dissolution performance similar to milled intermediate, demonstrating excellent disintegration characteristics. Conversely, tablets without intra-dispersion NBD were found to release significantly less NIF during dissolution analysis due to particle agglomeration. It was determined that compressibility and particle wetting increased as the level of intra-dispersion NBD increased.