Manipulation of thick-walled PEEK bushing crystallinity and modulus via instrumented compression molding

An instrumented hot compression molding apparatus was fabricated to allow real-time monitoring and precise temperature control during the compaction and consolidation of large polyether ether ketone (PEEK) products. The objective was to determine the impact of controlled variables on the properties of the molded article. Four different strategies were designed to control the mold thermal profiles. The average crystallinity in a commercial molding process is restricted due to large thermal masses with low thermal conductivity. In contrast, this research was able to reduce the crystallinity range from 33% to 6% by developing a special controlled apparatus and implementing new processing methodologies. In this study, PEEK showed a significant increase in the modulus compared to typical values measured on commercially produced analogs, and a higher degree of property uniformity. In a single commercially molded PEEK billet, compressive modulus variability was 13% at room temperature, and 21% at 225°C. Properties of billets produced using the laboratory apparatus showed a reduction in variability to 2%.     

Effect of long-chain branching molar fraction on scratch behavior of polypropylene

Polymers containing a certain amount of long-chain-branching (LCB) structure are expected to possess improved mechanical properties over those of the linear structure counterpart. However, fundamental knowledge on the structure–property relationship in LCB containing polypropylene (PP) is still illusive. In the present study, a set of model PP systems containing an increasing molar fraction of LCB (5–19 mol%) were prepared by reactive extrusion to determine how LCB content may influence the scratch behavior of PP. It is shown that with only 5 mol% of LCB content in PP can improve resistance against scratch-induced fish-scale formation by over 25%. The improvement of scratch resistance is attributed to the increases in entanglement density in LCB-containing PPs, which is evidenced by their creep-recovery behavior. The present study demonstrates that the incorporation of LCB in PP leads to higher viscoelastic recovery and increased tensile strength, which account for the observed improvement in scratch performance. The usefulness of LCB in polymers for improving scratch performance is discussed.     

Reality-based interaction affecting mental workload in virtual reality mental arithmetic training

ABSTRACT

The concept of digital game-based learning (DGBL) evolves rapidly together with technological enhancements of virtual reality (VR) and smart phones. However, the mental workload (MWL) that VR-training applications demand and motivational qualities originating from user experience (UX) should be identified in order to create effective and enjoyable training/learning challenges that fit with individual users’ capabilities. This study examined the effects of reality-based interaction (RBI) and VR on measures of student motivation and MWL, in a mental arithmetic game for secondary school pupils. In a randomised controlled trial with sixty school children, a mental arithmetic game was tested with three different interaction and two different presentation methods – VR RBI, VR head-mounted-display tapping and tablet flick-gesture. Results found a significant effect of RBI on MWL but no differences in enjoyment of training were found between VR-experience and tablet training-experience. In fact, adding the gaming-context to the mental arithmetic task created an enjoyable, motivating experience regardless of presentation or interaction-style.     

The influence of processing conditions on the mechanical properties of poly(aryl-ether-ketone)/polybenzimidazole blends

Interest in developing high-performance blends for niche applications has grown significantly in efforts to meet ever-increasing harsh environment demands. In this work, four model poly(aryl-ether-ketone)/polybenzimidazole (PAEK/PBI) blends were chosen to study the influence of premixing methods, processing, and matrix polymers, on their mechanical properties. Among the model poly(ether ether ketone) (PEEK) and PBI blends, mechanical properties are greatly enhanced by melt premixing. The molding process mainly affects the matrix crystallinity, which in turn greatly influences fracture toughness of the blend. Poly(ether ketone ketone) (PEKK) and PBI blend exhibits a slightly lower tensile strength and fracture toughness than PEEK/PBI due to the differences in inherent properties of PEEK and PEKK matrices and their interfacial interaction with PBI. The processing−structure–property relationship of PAEK/PBI blends is established to help guide optimal design of high-performance polymer blends for structural applications. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48966.     

材料、技术和创新

熟练地应用在建筑材料和技术进步方面所积累的知识能够帮助人们灵活运用材料和技术，进而为市民设计活动场所。与先进的建造技术结合，把不同的建设材料视为景观的构成系统和独立要素进行研究和掌握有利于在工程项目中加以利用。对建材和技术创新应用得比较好的例子之一是在建筑物上建造开阔的城市花园和公共空间。为此，欧林事务所开发和不断改进景观构成系统，虽然大部分不为使用者所见，却保证了混凝土的建筑结构之上的绿化茂盛的景观。此外，欧林事务所又研究和开发了一些新技术。利用浇注玻璃和压层玻璃作为室外景观的结构材料。景观设计工作在客户的需求、材料和技术中创造革新，也需要通过支持平凡的独特性，来创造持久、美观而实用的景观场所。     

Microwave and pulsed electric field assisted extractions of polyphenols from defatted canola seed cake

The incorporation of microwave and pulsed electric field (PEF) technologies in optimising the extraction of polyphenols from defatted canola seed cake was determined by Box‐Behnken response surface methodology, using three parameters of microwave treatment (power, time and liquid: solid (L:S) ratio) and four parameters of PEF (ethanol concentration, time, frequency and voltage). After microwave and PEF pretreatments, the polyphenols of defatted canola seed cake were extracted by ultrasound treatment under fixed variables (200 W of ultrasonic power, 70 °C of water bath and 20 min of extraction time). The measured responses were total phenolics, total flavonoids, the DPPH˙ scavenging activity and ferric reducing antioxidant power (FRAP). The maximum yields of all responses were achieved under optimum conditions of microwave processing (5 min, L:S ratio of 6.0 and 633.3 W) and PEF‐assisted extraction (30 V, 30 Hz, 10% ethanol concentration and 10 s).     

The Application of Biomaterials in the Treatment of Platinum-Resistant Ovarian Cancer

More than 70 % of women with ovarian cancer are diagnosed with advanced-stage disease, which is initially treated with cytoreductive surgery, and combination chemotherapy with platinum-based compounds. Most patients initially respond to platinum-based therapy, but eventually up to 80 % of this responsive cohort becomes refractory due to the development of platinum resistance. This review discusses current and potential therapeutic approaches that exploit biomaterial-based applications to combat platinum resistance either by enhancing the delivery of platinum-based drugs or prodrugs, delivering other toxic non-platinum-based bioactive factors (by themselves or in combination with platinum-based drugs) or by delivering other bioactive factors that re-sensitize resistant ovarian cancer cells to these drugs. The types of materials that are used, the bioactive factors applied (i.e., drug or gene delivery), and the specific agents that are employed to target these types of cancer cells are discussed. We conclude that the unique attributes of biomaterial-based applications can be further explored toward overcoming platinum-resistant ovarian cancer as monotherapy, or in combination with other treatment strategies.     

Prognosis of breast cancer is associated with one-carbon metabolism related nutrients among Korean women

ABSTRACT: BACKGROUND: The 5-year survival rate for breast cancer among Korean women has increased steadily; however, breast cancer remains the leading cause of cancer mortality among women. One-carbon metabolism, which requires an adequate supply of methyl group donors and B vitamins, may affect the prognosis of breast cancer. This aim of this study was to investigate the associations of dietary intake of vitamin B2, vitamin B6 and folate before diagnosis on the prognosis of breast cancer. METHODS: We assessed the dietary intake using a food frequency questionnaire with 980 women who were newly diagnosed and histopathologically confirmed to have primary breast cancer from hospitals in Korea, and 141 disease progression events occurred. Cox's proportional hazard regression models were used to estimate the hazard ratio (HR) and 95% confidence interval (95% CI) adjusting for age, education, recruitment sites, TNM stage, hormone status, nuclear grade and total calorie. RESULTS: There was no significant association between any one-carbon metabolism related nutrients (vitamin B2, B6 and folate) and the progression of breast cancer overall. However, one-carbon metabolism related nutrients were associated with disease progression in breast cancer patients stratified by subtypes. In ER + and/or PR + breast cancers, no association was observed; however, in ER--/PR-- breast cancers, a high intake of vitamin B2 and folate statistically elevated the HR of breast cancer progression (HR = 2.28; 95% CI, 1.20-4.35, HR = 1.84; 95% CI, 1.02-3.32, respectively) compared to a low intake. This positive association between the ER/PR status and progression of the disease was profound when the nutrient intakes were categorized in a combined score (Pinteraction = 0.018). In ER--/PR-- breast cancers, high combined scores were associated with a significantly poor DFS compared to those belonging to the low score group (HR = 3.84; 95% CI, 1.70-8.71). CONCLUSIONS: In conclusion, our results suggest that one-carbon related nutrients have a role in the prognosis of breast cancer depending on the ER/PR status.     

分析仪器的信息化发展趋势

分析仪器和其他传统工业一样,正在信息技术的改造下,向微型化、智能化、自动化和网络化方向发展。分析仪器作为数据获得的源头技术,必将在信息技术发展中起到重要作用,将从被动转向主动,并促进信息技术的发展。分析工作者也将是未来物联网不可或缺的生力军。     

Artist Space 6: Generative computation and the arts

Cyberart incorporates interactive systems within artistic practices. The foundation for a theory of artistic production and creativity becomes expanded on the basis of a biological implication that is not dependent solely on aesthetic judgment. To communicate with computers and their high performance software stimulates artists’ imagination and there are types of interface or hardware that connect the natural system (especially the body) to the internal life of computers.