Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Investigation on standard entropy change of metal hydrides and work function of metals

We focused on the work function of metals as an index of ion binding property between metals and hydrogen and analyzed the relation between the standard entropy change of metal hydrides and the work function of metals (alloys). The standard entropy change of saline hydrides and metallic hydrides roughly increased with the work function. It was indicated that hydrogen storage alloys consist of metal elements A and B whose work functions are small and large, respectively. The standard entropy changes of alloy-based metal hydrides with different composition ratio ΔS⁰ linearly increased with the work functions of the alloys W_c. W_c also linearly increased with the bulk modulus B_c. Then, it was found that ΔS⁰ was proportional to the standard heat of formation ΔH⁰ because dW_c/dB_c, dΔS⁰/dW_c and dΔH⁰/dB_c are constant.     

基于荧光显微镜的毛细管电泳系统的构建

毛细管电泳仪具有灵敏度高、分析速度快等优势,为降低其生产成本,基于电泳原理,以荧光显微镜为基础,设计了一套毛细管电泳系统。以20 bp(base pairs,碱基对)DNA ladder和100 bp DNA ladder为样本,全面分析了系统的稳定性、灵敏度和分离效果。结果表明:该系统在9 min内可以实现1500 bp以内DNA片段的高效分离,系统检测极限为0.1 ng/μL;在优化的电泳条件下,对限制性内切酶φX174-HincⅡ作用过的λ-DNA片段5 min内实现了291 bp与297 bp DNA片段的区分。     

Effect of morphology on shear viscosity for binary blends of polycarbonate and polystyrene

The structure and rheological properties of binary blends of polycarbonate (PC) and polystyrene (PS) were investigated using various PS samples with different molecular weights, namely PS1k (M_w = 1,000), PS53k (M_w = 53,000), and PS240k (M_w = 240,000). The blends with PS53k and PS240k show phase-separated structures, whereas the blend with PS1k is miscible. The shear viscosity decreases greatly on addition of PS53k and PS240k, especially at high shear rates, which would be a great advantage at processing operations. Because the nonlinear response occurs in the small strain region for multilayered films of PC and PS240k, the origin of the significant viscosity drop for the phase-separated system is interfacial slippage at the phase boundary.     

Sensitivity of charged particle activation analysis for long-lived radioactive nuclide determination

ABSTRACT

Charged Particle Activation Analysis (CPAA) utilizing an 8-MeV proton beam has been studied for determination of 35 long-lived radioactive nuclides. We accumulated the reaction cross section and nuclear decay data by referring to nuclear database supplied by National Nuclear Data Center in Brookhaven National Laboratory. We also calculated the reaction cross sections by using statistical model code ALICE. By using the nuclear data, we have derived determination sensitivity of the radioactive nuclides relative to unit weight and specific radioactivity. The result indicates that several hardly measurable nuclides with long half-lives such as ¹³⁵Cs, ²⁴⁴Pu, ¹²⁹I, ¹²⁶Sn, ⁹³Mo, ¹⁰⁷Pd, ²³⁶U, ²⁴⁸Cm, and ²³⁷Np have high sensitivity. It may be concluded that CPAA can be applied to determination of several long-lived nuclei and will provide a quick and non-destructive analysis method.     

An efficient manufacturing method for I-shaped cross-sectional CFRP beam with arbitrary arrangement of carbon fiber using electro-activated resin molding

Abstract

The I-shaped cross-sectional beam of CFRP (CFRP I-beam) is usually manufactured by the continuous protrusion method. Carbon fibers can only be arranged in the longitudinal direction. The CFRP I-beam with arbitrary arrangement of carbon fiber was manufactured with applying the electro-activated deposition molding method. The carbon fiber fabric was immersed in the deposition solution and energized, epoxy resin precipitated around carbon fiber and impregnated. The resin-impregnated fabric was installed to the mold, and the CFRP I-beam was fabricated. The CFRP I-beam was subjected to three-point bending tests, and the relationship between load-deflection was simulated by finite-element analysis.     

Two-step seismic limit state design procedure based on non-linear LRFD and dynamic response analyses

Recently, the limit state design (LSD) or performance-based design have got popularity in the field of building design in Japan as well as in other countries. In the two design methods the structural reliability theory plays an essential role in setting design criteria as well as demonstrating the target reliability level to society. However, the conventional load and resistance factor design (LRFD) has been basically formulated supposing that safety checking is done on the basis of linear assumption of member forces and displacement. Therefore, when applying the LRFD for seismic design, for more accurate treatment of the non-linearity, a new procedure has to be explored especially for the ultimate limit state. Although several procedures for the structural reliability evaluation, treating non-linear displacement responses, have been proposed, they require complex procedures that may not be used in the practical design process. Accordingly, for applying it to a seismic LSD format based on the probabilistic concept, it is essential to manage two important requirements at the same time, accuracy and simplicity of procedure. In the present study, a new design format using the following two-step procedure is proposed to maintain both accuracy and simplicity; (1) a non-linear LRFD formulation, and (2) a formulation based on non-linear dynamic response analysis. Also, two design examples are presented.     

Evaluation of the impact of bioaugmentation and biostimulation by in situ hybridization and microelectrode

Three rotating disk biofilm reactors were operated to evaluate whether bioaugmentation and biostimulation can be used to improve the start-up of microbial nitrification. The first reactor was bioaugmented during start-up period with an enrichment culture of nitrifying bacteria, the second reactor received a synthetic medium containing NH(4)(+) and NO(2)(-) to facilitate concomitant proliferation of ammonia- and nitrite-oxidizing bacteria, and the third reactor was used as a control. To evaluate the effectiveness of bioaugmentation and biostimulation approaches, time-dependent developments of nitrifying bacterial community and in situ nitrifying activity in biofilms were monitored by fluorescence in situ hybridization (FISH) technique and microelectrode measurements of NH(4)(+), NO(2)(-), NO(3)(-), and O(2). In situ hybridization results revealed that addition of the enrichment culture of nitrifying bacteria significantly facilitated development of dense nitrifying bacterial populations in the biofilm shortly after, which led to a rapid start-up and enhancement of in situ nitrification activity. The inoculated bacteria could proliferate and/or survive in the biofilm. In addition, the addition of nitrifying bacteria increased the abundance of nitrifying bacteria in the surface of the biofilm, resulting in the higher nitrification rate. On the other hand, the addition of 2.1mM NO(2)(-) did not stimulate the growth of nitrite-oxidizing bacteria and did inhibit the proliferation of ammonia-oxidizing bacteria instead. Thus, the start-up of NO(2)(-) oxidation was unchanged, and the start-up of NH(4)(+) oxidation was delayed. In all the three biofilm reactors, data sets of time series analyses on population dynamics of nitrifying bacteria determined by FISH, in situ nitrifying activities determined by microelectrode measurements, and the reactor performances revealed an approximate agreement between the appearance of nitrifying bacteria and the initiation of nitrification activity, suggesting that the combination of these techniques was a very powerful monitoring tool to evaluate the effectiveness of bioaugmentation and biostimulation strategies.     

EXAFS speciation and phytoavailability of Pb in a contaminated soil amended with compost and gypsum

Due to unregulated uses of lead pellets for hunting purposes in Japan, soils and sediments in some river basins and wetlands have become highly contaminated with Pb. Deterioration of natural vegetation has occurred sporadically in these areas, and therefore revegetation is needed for ecological restoration. The objectives of the present study were to assess the effects of surface applications of compost and gypsum amendments on Pb availability to a watercress plant (Nasturtium officinale W.T. Aiton) and molecular-scale speciation of Pb in soil solid phases. The compost and gypsum amendments significantly decreased dissolved Pb and Sb in pore water. The concentration of Pb in aboveground plant tissues was 190 mg kg^− 1 in the control soil and was reduced to < 20 mg kg^− 1 in the compost and gypsum-amended soils. The concentration of Sb in plants grown in the control soil was 13 mg kg^− 1, whereas that in the soils receiving compost and gypsum decreased below detectable levels. Redox potential was higher in vegetated soils (ave. 349 mV) than in the unvegetated soils (ave. 99 mV) due to oxygen introduced by plant roots. Extended X-ray absorption fine structure (EXAFS) spectroscopy illustrated that Pb occurred as Pb sorbed on birnessite and/or ferrihydrite (Pb-Mn/Fe, ~ 60%) and Pb sorbed on organic matter (Pb-org, ~ 15%), and galena (PbS, ~ 10%) in the vegetated and unvegetated control soils. The compost amendment increased the proportion of Pb-org by 2-fold than in the control soils. The amended soils with plant growth decreased the proportion of Pb-Mn/Fe phases by half of that without plant growth. Galena and anglesite (PbSO₄) were not detected in compost-amended soils and even in gypsum-amended soils since a significant soil reduction to anoxic levels did not occur in the entire soil. The present study indicated that, under flooded conditions, surface applications of compost and gypsum amendments reduced plant Pb uptake from the Pb contaminated soil.