Defining Dry Eye from a Clinical Perspective

Over the past decades, the number of patients with dry eye disease (DED) has increased dramatically. The incidence of DED is higher in Asia than in Europe and North America, suggesting the involvement of cultural or racial factors in DED etiology. Although many definitions of DED have been used, discrepancies exist between the various definitions of dry eye disease (DED) used across the globe. This article presents a clinical consensus on the definition of DED, as formulated in four meetings with global DED experts. The proposed new definition is as follows: “Dry eye is a multifactorial disease characterized by a persistently unstable and/or deficient tear film (TF) causing discomfort and/or visual impairment, accompanied by variable degrees of ocular surface epitheliopathy, inflammation and neurosensory abnormalities.” The key criteria for the diagnosis of DED are unstable TF, inflammation, ocular discomfort and visual impairment. This definition also recommends the assessment of ocular surface epitheliopathy and neurosensory abnormalities in each patient with suspected DED. It is easily applicable in clinical practice and should help practitioners diagnose DED consistently. This consensus definition of DED should also help to guide research and clinical trials that, to date, have been hampered by the lack of an established surrogate endpoint.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Organosulfonic acid-functionalized mesoporous composites based on natural rubber and hexagonal mesoporous silica

This study is the first report on synthesis, characterization and catalytic application of propylsulfonic acid-functionalized mesoporous composites based on natural rubber (NR) and hexagonal mesoporous silica (HMS). In comparison with propylsulfonic acid-functionalized HMS (HMS-SO₃H), a series of NR/HMS-SO₃H composites were prepared via an in situ sol–gel process using tetrahydrofuran as the synthesis media. Tetraethylorthosilicate as the silica source, was simultaneously condensed with 3-mercaptopropyltrimethoxysilane in a solution of NR followed by oxidation with hydrogen peroxide to achieve the mesoporous composites containing propylsulfonic acid groups. Fourier-transform infrared spectroscopy and ²⁹Si MAS nuclear magnetic resonance spectroscopy results verified that the silica surfaces of the NR/HMS-SO₃H composites were functionalized with propylsulfonic acid groups and covered with NR molecules. After the incorporation of NR and organo-functional group into HMS, the hexagonal mesostructure remained intact concomitantly with an increased framework wall thickness and unit cell size, as evidenced by the X-ray powder diffraction analysis. Scanning electron microscopy analysis indicated a high interparticle porosity of NR/HMS-SO₃H composites. The textural properties of NR/HMS-SO₃H were affected by the amount of MPTMS loading to a smaller extent than that of HMS-SO₃H. NR/HMS-SO₃H exhibited higher hydrophobicity than HMS-SO₃H, as revealed by H₂O adsorption–desorption measurements. Moreover, the NR/HMS-SO₃H catalysts possessed a superior specific activity to HMS-SO₃H in the esterification of lauric acid with ethanol, resulting in a higher conversion level.     

Formation of macroporous organic‐inorganic polymer hybrids using tea extract

Macroporous organic–inorganic polymer hybrids were prepared from poly(vinyl pyrrolidone), and inorganic alkoxides. To a reaction mixture of poly(vinyl pyrrolidone) and tetramethoxysilane, extract from tea leafs and HCl aqueous solution in methanol were added. The resulting mixture was constantly stirred at room temperature for 1 h and heated at 60°C for two weeks. Consequently, the corresponding polymer hybrid became a macroporous material having a pore size from 3.26 to 20.86 μm. We succeeded in finding that the pruned tea leafs were able to utilize the synthesis of novel macroporous materials. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polypyridyl Ru(II)-sensitizers with extended π-system enhances the performance of dye sensitized solar cells

New polypyridyl ruthenium(II) complexes “cis-Ru(4,4′-dimesityl-2,2′-bipyridine) (Ln) (NCS)₂ H102” and “cis-Ru(4,4′-bis(2,3,6-tri-isopropylphenyl)-2,2′-bipyridine) (Ln) (NCS)₂ H105”, where Ln = 4,4′-dicarboxylic acid-2,2′-bipyridine; were synthesized and successfully applied to sensitization of nano-crystalline TiO₂ based solar cells (DSSCs). The DSSCs of H102 and H105 fabricated from 0.16 cm² TiO₂ electrodes exhibited broader comparable photocurrent action spectra with almost identical solar-to-electrical energy conversion efficiency (η) as compared to N719 sensitizer. The incident photon-to-current conversion efficiency (IPCE) values of 98% and 95% were obtained for H102 and H105 sensitizers respectively. Under 1 sun condition, η-values of 8.39% (short-circuit photocurrent (J_SC) = 16.4 mA/cm², open-circuit photo voltage (V_OC) = 692 mV, fill factor = 0.734), 8.76% (J_SC = 16.3 mA/cm², V_OC = 735 mV, fill factor = 0.734) and 9.12% (J_SC = 16.1 mA/cm², V_OC = 745 mV, fill factor = 0.753) were obtained for H102, H105 and N719 sensitizers respectively.     

Development of a multigrid-type microstrip gas chamber

Conventional microstrip gas chambers (MSGCs) have encountered many difficulties, such as limited gas gain and sparking damages. We propose a new multigrid-type MSGC (M-MSGC) to overcome some of these difficulties. Additional grid strips are inserted between the anode and the cathode in this new type of MSGC. Gaps between these strips are chosen to be as small as 10 μm where one can expect an efficient removal of the surface charge. With the existence of other strips with lower potentials than the anode, the field strength around the neighboring grid to the anode strip is not as high as the conventional small-gap MSGCs. The contribution of the surface streamer to the damage is greatly suppressed because the electric field parallel to the surface is screened by the intermediate grid electrodes. However, additional electrodes also screen all the electric field of the upper part of the substrate, and we cannot observe induced signals from the backside of the substrate. To overcome that difficulty, we propose another signal readout method using a patterning approach. Floating pads are placed close to the cathode strip on the surface of the M-MSGC, and the induced charges are read out via the pads. If the area of the pads is sufficiently large and the positive charges are moving toward the pads, the backside electrodes can sense the induced charge. Collected charges on the pads are leaked through the surface resistance. The backside signal through 2.3-mm-thick glass readout of the position along the cathode strips is successfully confirmed through experimental results     

Oxidative Dehydrogenation of Propane with CO2 Over Cr/H[B]MFI Catalysts

Abstract  

Cr/silicalite-1 and Cr/H[B]MFI catalysts were prepared by the impregnation method, and Cr/H[B]MFI were further treated by steaming. The catalysts were employed for the oxidative dehydrogenation of propane to propylene with CO₂ as the oxidant. Cr/H[B]MFI showed significantly higher catalytic activity than Cr/silicalite-1, and steamed Cr/H[B]MFI was superior in the reaction stability to Cr/H[B]MFI. The nature of the supported chromium species have been characterized by a number of physicochemical techniques, such as Raman, UV–vis and NMR. It is concluded that the steaming led to the auto-reduction of some Cr⁶⁺ to Cr³⁺, and resultant Cr³⁺ species might be located near the boron center in the borosilicate framework to counterbalance the negative charge of the framework. The transformation of Cr⁶⁺ species to Cr³⁺ species, facilitated by the steaming process and the presence of boron in the catalyst, is responsible for the enhanced stability of oxidative dehydrogenation of propane to propylene with carbon dioxide as the oxidant.     

Polonium evaporation and adhesion experiments for the development of polonium filter in lead–bismuth cooled reactors

Fundamental experiments were performed to determine the adhesion characteristics of polonium to different metals and to develop a filter for polonium evaporated from neutron-irradiated LBE. The results of the first experiments suggested that adhesion characteristics are almost the same for stainless steel and nickel metal. The results of the preliminary experiments for a polonium filter suggested that stainless steel mesh with thin wires could effectively collect polonium evaporated from neutron-irradiated LBE. In the experiments, stainless steel wire mesh was used, but from the results of adhesion experiment, it is expected that the same effect can be obtained with wire mesh made of other kinds of metal.     

Hermetic seal of ceramics and metals joints by an Al-Si interlayer

Journal of Materials Science Letters -