Matrix influence on the piezoelectric properties of piezoelectric ceramic/polymer composite exhibiting particle alignment

This study was addressed to the influence of an electric field strength applied at fabrication process and matrix properties, such as the dielectric constant and the Young's modulus, on “pseudo‐1‐3 piezoelectric ceramic/polymer composite” in order to further enhance the piezoelectricity of that. The pseudo‐1‐3 piezoelectric ceramic/polymer composite consists of linearly ordered piezoelectric ceramic particles in polymer material. Silicone gel, silicone rubber, urethane rubber, and poly‐methyl‐methacrylate, which exhibit different dielectric constants and Young's modulus, were used as matrices to evaluate the matrix influence. The piezoelectricity of the pseudo‐1‐3 piezoelectric ceramic/polymer composite was evaluated using the piezoelectric strain constant d₃₃. The d₃₃ is one of the indices of the piezoelectric properties for piezoelectric materials. As a result, it was confirmed that d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite increased with the increase of the electric filed strength applied at fabrication process, though, it reached a constant value at a certain strength value. Further it was confirmed that dielectric constant of the matrix had a small influence on d₃₃ of the pseudo‐1‐3 piezoelectric ceramic/polymer composite, however, in case of matrix of lower Young's modulus, d₃₃ was increase. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41817.     

Finite element beam propagation method for three-dimensionaloptical waveguide structures

A beam propagation method (BPM) based on the finite element method (FEM) is described for longitudinally varying three-dimensional (3-D) optical waveguides. In order to avoid nonphysical reflections from the computational window edges, the transparent boundary condition is introduced. The present algorithm using the Pade approximation is, to our knowledge, the first wide-angle finite element beam propagation method for 3-D waveguide structures. To show the validity and usefulness of this approach, numerical results are shown for Gaussian-beam excitation of a straight rib waveguide and guided-mode propagation in a Y-branching rib waveguide     

NiCoFe/C cathode electrocatalysts for direct ethanol fuel cells

A direct ethanol fuel cell (DEFC), which is less prone to ethanol crossover, is reported. The cell consists of PtRu/C catalyst as the anode, Nafion^® 117 membrane, and Ni–Co–Fe (NCF) composite catalyst as the cathode. The NCF catalyst was synthesized by mixing Ni, Co, and Fe complexes into a polymer matrix (melamine-formaldehyde resins), followed by heating the mixture at 800 °C under inert atmosphere. TEM and EDX experiments suggest that the NCF catalyst has alloy structures of Ni, Co and Fe. The catalytic activity of the NCF catalyst for the oxygen reduction reaction (ORR) was compared with that of commercially available Pt/C (CAP) catalyst at different ethanol concentrations. The decrease in open circuit voltage (V_oc) of the DEFC equipped with the NCF catalysts was less than that of CAP catalyst at higher ethanol concentrations. The NCF catalyst was less prone to ethanol oxidation at cathode even when ethanol crossover occurred through the Nafion^®117 film, which prevents voltage drop at the cathode. However, the CAP catalyst did oxidize ethanol at the cathode and caused a decrease in voltage at higher ethanol concentrations.     

2D artificial life system using network-type assembly-like language: influence of change in environment with costs of instructions

To unlock the full potential of evolution in digital media, a Tierra-like system using network-type assembly-like language has been constructed. In the system, like Avida, digital creatures, self-replicating programs, live in a discrete 2D torus space and an interaction between creatures is restricted locally. Bearing a genetic network in mind, network structure is introduced. In the previous works, it is shown that the possibility that the network-type model has more potential of evolution than a linear-type model like Avida in a simple environment. In this paper, to study the potential of evolution more precisely, we model the effects of environment other than creatures. As one of the simplest models of such environment, the cost of execution, i.e. executing time, is introduced. The difficult environment to live in costs high to execute instructions, the easy environment does low. In computer experiments, we have investigated the influence of change in environment by analyzing the process of evolution and diversity of the system. Experimental results show that the network-type system keeps more stable diversity than the linear-type system does, even when the environment changes drastically. This indicates the possibility that the network-type system has more potential of evolution than the linear-type system has. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

The tricarboxylic acid cycle in Dictyostelium discoideum. Systemic effects of including protein turnover in the current model

The current model for the tricarboxylic acid cycle in Dictyostelium discoideum is based on extensive experimental studies of enzyme kinetics in vitro and of metabolite fluxes measured in vivo. In the previous papers (Shiraishi, F., and Savageau, M. A. (1992) J. Biol. Chem. 267, 22912-22918; 22919-22925; 22926-22933; 22934-22943) of this series we have carried out extensive analyses of the current model within the framework of biochemical systems theory with a view toward understanding the behavior of the integrated system. The model was found to be ill determined with respect to at least three of its features. In this paper we propose a minimal modification in the model that is consistent with previous experimental data but also includes recycling of amino acids for protein synthesis, one of the neglected features identified as important in the previous analysis. We again perform an analysis within the framework of biochemical systems theory to determine the systemic consequences of this change. The results show that the robustness of the modified model, as determined by the parameter sensitivities, is improved by 2 orders of magnitude over that of the previous model. Analysis of the dynamics shows that the turnover times for the pools of alanine, glutamate, and aspartate are reduced by 2 orders of magnitude and made more physiologically realistic. The distribution of flux is no longer rigidly fixed, and problems previously centered on the metabolism of pyruvate have been partially alleviated. Continued discrepancies lead us to question the degree to which kinetic data obtained with purified enzymes in vitro faithfully reflect the kinetic behavior of the integrated enzyme system in vivo. We must continue to re-examine the manner in which the kinetics of reactions in vivo are represented and to reassess the physical conditions that prevail in vitro and in vivo. Results in this paper direct our attention toward specific aspects of the system where these efforts should be focused. Thus, a minimal modification of the previous model has led to several improvements that make it more representative of the tricarboxylic acid cycle in D. discoideum, and the analysis in this paper leads to further predictions for improving the model.     

《最终幻想Ⅺ》的更新系统设计

对于如何提供补丁下载，单机PC游戏开发人员已经是轻车熟路了，这些补丁包里通常包含玩家需要手动更新的数据和二进制文件．但基本上．他们很少会为了补丁下载而创建一个“更新系统”。     

Motility related protein 1 (MRP1/CD9) expression in colon cancer

STUDY OBJECTIVES: To examine the incidence and clinical significance of prolonged air leak (PAL) in patients undergoing radical upper lobectomy and to determine potential risk factors for PAL in this group of patients. DESIGN: Retrospective review of a prospective database. SETTING: Experience of one thoracic surgeon at a tertiary care cancer center. PATIENTS: One hundred consecutive patients undergoing right upper lobectomy and mediastinal lymph node dissection for non-small cell lung cancer over an 11-year period. MEASUREMENTS: PAL was defined as an air leak lasting >7 days. Preoperative, intraoperative, and postoperative clinical data were collected and analyzed to determine the factors associated with PAL. RESULTS: PAL was the most prevalent postoperative complication, comprising 25.5% of all complications seen, and lasting an average of 12.1+/-5.3 days. In 21 of the 26 patients with PAL, this complication was the only morbidity identified. There was no statistically significant difference in patient age, gender, preoperative FEV1 and diffusion of carbon monoxide, exposure to neoadjuvant chemotherapy, status of pulmonary fissures, or pathologic stage between the PAL group vs the remaining 74 patients without this complication. A significantly greater proportion of patients with PAL had FEV1/FVC ratio < or =50% (6/26 vs 5/74; p=0.02). Patients with PAL had significantly longer median length of hospital stay (11 vs 7 days; p=0.0001). Moreover, PAL was the single most common reason for an extended length of hospitalization (21/58, 36% of all causes). CONCLUSION: PAL is an alarmingly common postoperative complication and is the most frequent cause of an extended length of hospital stay in patients undergoing radical upper lobectomy. Severe obstructive pulmonary disease predisposes patients to the development of this complication.     

Capturing Expert Knowledge for Supporting Design and Manufacturing of Injection Molds

Knowledge based approach is effective for renovating design and manufacturing processes. The objective of this paper is to investigate roles and usages of expert engineering knowledge in high-quality manufacturing, and to study a practical knowledge capturing method for realizing engineering support tools. An engineer oriented interface for a capturing method is proposed, and a flexible representation framework is studied for various types of expert knowledge. An integrated knowledge-based system has been developed for mold design support. The results have been evaluated by design and manufacturing of molds for cellular phones, and have shown substantial reduction of lead time for mold production.