序批式生物膜法的脱氮特性研究

对序批式生物膜工艺的脱氮特性进行了探讨，并提出了过量储存-SND脱氮作用机理，即厌氧段脱氮主要靠生物膜对含碳、氮有机物的过量储存作用，而好氧段脱氮则靠生物膜的同步硝化反硝化(SND)作用，反硝化的有机碳源主要为生物膜在厌氧段过量储存的有机物。镜检发现反应器中的优势菌属为假单胞菌属，其次为气单胞菌属、芽孢杆菌属、微球菌属、硝化杆菌属。     

半封闭压缩机故障分析

分类分析了引起压缩机故障的原因，包括液击、溢流、满液启动、润滑油不足、污染、过热等。     

高效保温绝热涂料的研制

以丙苯乳液为主要成膜物质,膨胀珍珠岩、镁铝硅酸盐矿物、硅酸盐纤维增强剂为主要原料,制得了高效保温绝热涂料,其导热系数0.0594W/(m.K)。     

早龄期高强混凝土自收缩的测量

文章介绍了用电容传感器测量高强混凝土早期收缩变形的基本原理和测量方法。其测量精度和测量范围能够完全满足对高强度混凝土收缩进行研究的需要 ,同时变形的测量可以从混凝土初凝开始 ,解决了高强混凝土收缩相关课题研究的核心问题     

空气源热泵冷热水机组压缩机运行故障分析

分析了压缩机运行中出现故障的原因，给出了改进热泵机组及压缩机的措施，为合理选择热泵机组的压缩机及合理配置系统提供了依据。     

平行四边形起落架有限元计算

工程钻机常采用具有平行四边形机构的起落架。以往在进行多部件铰接体系的有限元分析时，一般是将铰接结构取隔离体进行分析，不仅麻烦且不直观；或是将铰接结构铰点与部件固化于一体进行分析，结果误差较大，不利于结构优化。本文通过三维杆单元模拟销轴连接，建立起一种精确的铰接结构的有限元模型，并结合钻机起落架进行具体分析。     

单向偏心结构的简化增量动力分析方法

增量动力分析方法(IDA)可以较为全面的评估结构的抗震性能,但需对结构进行大量的非线性时程分析,计算量巨大.该文将单向偏心结构的等效二自由度模型(EDDOF)应用于增量动力时程分析,提出了单向偏心结构的简化增量动力分析方法.然后选取20条实际地震记录和一栋5层偏心结构,基于等效二自由度模型和原型模型分别进行了增量动力时...     

Influence of Voids on the Tensile Performance of Carbon/epoxy Fabric Laminates

This paper aims at investigating the effect of voids on the tensile properties of [(±45)4/(0,90)/(±45)2] S and [(±45)/0 4/(±45)(0,90)] S composites.Specimens with void contents in the range of 0.4% to 9.0% were fabricated from carbon/epoxy fabric.The void content was determined by ultrasonic attenuation and optical image analysis,and microscopic inspection was also used to analyze the shape and size of the voids.The influence of voids on the tensile strength and modulus of both stacking sequence is compared in terms of the size and the shape of the voids.The effect of voids on the initiation and propagation of tensile failure of both stacking sequence composite was investigated.     

Preparation and Properties of Smart Thermal Control and Radiation Protection Materials for Multi-functional Structure of Small Spacecraft

Considering the unique properties of small spacecraft,such as light weight,low power-consumption and high heat flux density,a new kind of lightweight boron carbide(B 4 C) radiation-protection coating material was proposed.New techniques for preparing LSMO thermal control coating and B 4 C radiation-protection coating were developed.The sample piece of multi-functional structure was manufactured by using the proposed materials,and a series of performance tests,such as thermal control and radiation-protection behaviors were evaluated.Test results show that:the emissivity of the multi-functional structure varies from 0.42 to 0.86 at 240 K to 353 K and the phase transition temperature is about 260 K.The electron radiation-protection ability of the multi-functional structure is 3.3 times better than that of Al material.The performance index of this multi-functional structure can meet the requirements for space application in on-board electronic equipment.     

凤凰山地区岩心钻探施工技术探讨

由于受构造的影响,凤凰山地区地层破碎强烈、结构松散且胶结性差,导致成孔、护壁难度较大.该区地层中存在多层厚度不等的硅质板岩和长石石英岩,硅质含量高,结构致密坚硬且研磨性弱,属于典型的坚硬“打滑”地层.同时,地层中还存在多层不稳定的碳质板岩,遇水松散,孔壁极不稳定,造成钻探施工难度大.通过多次的施工实践,采用套管护壁,合...