电气化铁路既有线深路堑扩堑石方控制爆破

介绍电气化铁路既有线无隔墙台阶爆破扩堑方法。沿既有线方向设置低台阶 ,边界处布置光爆孔 ,采用“同列同段和列间微差”的起爆网路。采用自制的“炮被”和架设“钢管排架”阻挡飞石、滚石和滑石 ,确保了既有线的安全。文中还概述了“炮被”和“钢管排架”的制做以及作者的认识和体会。     

概率空间中的一个不等式

设｛Ｚ，（Ｗ）｝是定义在概率空间上的独立的随机变量序列，Ｚ（Ｗ）具有方差为期望Ｅ（Ｚｎ）＝０．本文证明了对任意算数序列｛ｂｎ｝及任意的存在充分大的整数Ｎ＞０使当Ｎ＇＞Ｎ″＞Ｎ时．有此不等式在随机级数研究中有重要作用．     

片状陶瓷材料高低温电性能参数的自动检测

由进口电性能仪配上自制的高温系统，计算机自动采集数据，配置成一套高低温电性参数测定装置，该装置的特点是，升温快，炉体小巧，炉芯可更换盛液氮装置，屏蔽良好，等温区长，温工及参数测量精确可靠。     

ECAP细化晶粒法的仿真与分析

ECAP(Equal Channel Angular Extrusion)方法，是实现材料纯剪切变形的有效方法。本文采用有限元（FEA）分析软件ANSYS对Al的挤压过程进行仿真与分析。分析结果表明：外切角Φ、圆角半径、试样与凹模之间的摩擦系数、凹模本身的特性（如弹性模量、泊松比等）等等，对材料的变形量都有不同程度的影响。     

利用单片机80c196kc实现等间隔采样及采样值的回显

本文主要介绍以单片机80c196kc为CPU对模拟信号进行等间隔采样以及实现对采样值回显的问题。详细介绍了测频软件及电路的实现，对等间隔采样软件实现进行了详细论述：详尽讨论了对于MG-12864-2液晶显示器的电路连接与软件控制方法；对MG-12864-2液晶显示器应用的独特之处做了细致的分析。     

在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

Increasing the number of psychologists of color: Public policy issues for affirmative diversity.

This article identifies the key issues involved in the debate about affirmative action. The June 2003 Supreme Court decisions allowing consideration of race to ensure that there is a "critical mass" of African American, Latino/Latina, and Native American applicants to higher education are addressed. Social psychologists have identified key myths and provided clarifications about the need for and consequences of strategies used to promote equal opportunity for persons of color and women. A brief history of affirmative action and of the problems it was designed to solve is provided. The accomplishments, benefits, and compelling interest of diversity and affirmative action are described, as well as the concerns and counterpoints. The lack of a substantial applicant pool in psychology hinders progress toward diversity. Alternative strategies for remedying this lack beyond affirmative admissions policies in psychology are briefly discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of equal channel angular extrusion on the microstructure and superplasticity of an Al-Li alloy

This research investigates the use of equal channel angular extrusion (ECAE) processing to produce a superplastic form of the aluminum alloy 2098. The starting material was a hot-rolled and precipitation-hardened plate with elongated grains of width 67–92 μm, and a composition in weight percent of 2.2% Li, 1.3% Cu, 0.73% Mg, 0.05% Zr, balance Al. Microstructural evolution was investigated with optical and transmission electron microscopy (TEM) and microhardness measurements after each step of a multipass ECAE process. ECAE produced a submicron grain structure with an average size of about 0.5 μm. The sub-grain microstructure size was a function of the magnitude of the input strain and the extrusion temperature. Misorientation angles of the developed submicron structure increase with increasing number of passes at warm working temperatures. Superplastic behavior of the ECAE-processed alloy was achieved. However, the low zirconium content of the 2098 alloy resulted in grain growth of the refined structure at the superplastic processing temperatures, placing a lower limit on the deformation rates that can be used.     

基于等流量法缩减空间策略的水电站调度方法

采用合理的调度方法可有效提高水电站发电效益。模拟方法容易获取可行解,但不能提供最优解;优化方法能够求得最优解,但往往因搜索空间过大而求解不理想。本文考虑两者特点,提出基于等流量法缩减空间策略的水电站调度方法,即利用等流量法模拟调度过程,缩减搜索空间,在缩减空间内利用优化方法求解模型。实例研究表明：该方法适合群智能算法求解水电站调度模型;在相同群智能算法和水电站调度模型下,缩减搜索空间后,多年平均发电量、保证出力提升显著,多年平均弃水量明显减少。此外,群智能算法在缩减空间内的收敛速度更快,标准差更小。因此,该方法能够有效提高群智能算法求解的优化程度、收敛速度和稳定性,可为水电站调度提供重要参考。     

纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成