Fabrication of barium titanate ceramics via digital light processing 3D printing by using high refractive index monomer

A digital light processing (DLP) technology has been developed for 3D printing lead-free barium titanate (BTO) piezoelectric ceramics. By comparing the curing and rheological properties of slurries with different photosensitive monomer, a high refractive index monomer acryloyl morpholine (ACMO) was chosen, and a design and preparation method of BTO slurry with high solid content, low viscosity and high curing ability was proposed. By further selecting the printing parameters, the single-layer exposure time was reduced and the forming efficiency has been greatly improved. Sintered specimens were obtained after a nitrogen-air double-step debinding and furnace sintering process, and the BTO ceramics fabricated with 80 wt% slurry shows the highest relative density (95.32 %) and piezoelectric constant (168.1 pC/N). Furthermore, complex-structured BTO ceramics were prepared, impregnated by epoxy resin and finally assembly made into hydrophones, which has significance for the future design and manufacture of piezoelectric ceramic-based composites that used in functional devices.     

Hydraulic reactivity and cement formation of baghdadite

In this study, the hydraulic reactivity and cement formation of baghdadite (Ca₃ZrSi₂O₉) was investigated. The material was synthesized by sintering a mixture of CaCO₃, SiO₂, and ZrO₂ and then mechanically activated using a planetary mill. This leads to a decrease in particle and crystallite size and a partial amorphization of baghdadite as shown by X-ray powder diffraction (XRD) and laser diffraction measurements. Baghdadite cements were formed by the addition of water at a powder to liquid ratio of 2.0 g/ml. Maximum compressive strengths were found to be ~2 MPa after 3-day setting for a 24-h ground material. Inductively coupled plasma mass spectrometry (ICP-MS) measurements showed an incongruent dissolution profile of set cements with a preferred dissolution of calcium and only marginal release of zirconium ions. Cement formation occurs under alkaline conditions, whereas the unground raw powder leads to a pH of 11.9 during setting, while prolonged grinding increased pH values to approximately 12.3.     

Combination of nuclear magnetic resonance spectroscopy and nonlinear methods to analyze the copolymerization of phosphonic acid derivatives

We demonstrate in this study that the combination of modern inline monitoring methods [here: inline nuclear magnetic resonance (NMR)] with simulations gains more exact and profound kinetic results than previously used methods like linearization without that combination. The ¹H-NMR spectroscopic data (more than 100 data points) are used to construct the copolymerization diagram. The reactivity ratios are obtained applying the van Herks nonlinear least square method. The examination of the radical copolymerization of 2-hydroxyethyl methacrylate (HEMA) with (2-{[2-(ethoxycarbonyl)prop-2-en-1-yl]oxy}ethyl) phosphonic acid (ECPPA) as important adhesive monomer used in dentistry yields reactivity ratios of r_HEMA = 1.83; r_ECPPA = 0.42. The copolymerization diagram reflects nonideal, non-azeotropic copolymerization. The sequence distribution of the obtained by Monte Carlo simulation indicates the generation of statistical copolymers. As an important finding, it is demonstrated that the repeating units responsible for etching and adhesion are arranged over the whole polymer chain, which is necessary to achieve proper functionality. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48256.     

FE simulation of the curing behavior of the epoxy adhesive Hysol EA-9321

Cold-curing adhesives, characterized by an unsteady curing degree, present various advantages for assembling large scale structures set up under outdoor conditions. Thus various applications can be found in aerospace and automotive industries where structures are affected by thermal and mechanical loads. Hence, the curing state of the adhesive must be known to evaluate the lifetime of such bonded structures. The evolution of the polymerization of the adhesive Hysol EA-9321 during the curing process was examined in this paper. To that end, the curing degree of the adhesive was experimentally and analytically investigated for different curing cycles with a view to a potential application in the aerospace domain, where structures are assembled at low temperatures. Existing dynamic and isothermal curing models were applied to simulate the curing behavior of the adhesive. Then, an FEM model was developed to simulate the process of adhesive curing by taking into account a thermo-kinetic coupling.     

Effects of unequal reactivity of functional groups on gelation phenomena in polyurethane systems

A model to describe the effect of unequal reactivity on curing of a diisocyanate with water, polyol and a diol was developed. The model predicts whether a given initial composition would gel or not and the fractional conversions of functional groups at the gel point. It has been shown that the relative speeds of reaction of water and hydroxyl groups can be used to classify water's behaviour as that of a (i) nonreactive diluent (ii) monofunctional blocking agent and (iii) chain extender capable of connecting branch points.     

Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Age and gender differences in cardiac reactivity and subjective emotion responses to emotional autobiographical memories.

This research reports age and gender differences in cardiac reactivity and subjective responses to the induction of autobiographical memories related to anger, fear, sadness, and happiness. Heart rate (HR) and subjective state were assessed at baseline and after the induction of each emotion in 113 individuals (61 men, 52 women; 66% European American, 34% African American) ranging in age from 15 to 88 years (M = 50.0; SD = 20.2). Cardiac reactivity was lower in older individuals; however, for anger and fear, these age effects were significantly more pronounced for the women than the men. There were no gender differences in subjective responses, however, suggesting that the lower cardiac reactivity found among older people is dependent on gender and the specific emotion assessed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of Mineral on Metallurgical Coke Solution Loss Reaction in Blast Furnace

Thecokesolutionlossreactionisoneofthemostimportanteffectsresultingincokepulverizinginblastfurnace .Thefactorswhichaffectreactionincludecokeporestructure ,micro crystalstructureonporewall ,thecontentandconstituentofminer als ,etc .Amongthesefactors ,theconstituentofmineralsisemphasizedallovertheworldinrecentyears .Buttheemphasisofmoststudieswasputontheeffectofalkalimetals (K ,Na)oncokesolutionlossreactionandtheeffectofotherelementswassel domreported[1-5] .Theeffectofthirteenmineralsoncokesolut…