用于光城域网的新型RPR技术

介绍IEEE802.17正在进行标准化的弹性分组环(RPR,Resilient Packet Ring)协议,分析其帧结构及主要功能特色,并和SDH与以太网等现有城域网技术作简要对比;可以预见,随着标准化工作的进行,综合多种传输技术优势的RPR会成为创建下一代高速光城域网的首选技术。     

环形截面大偏心受压构件截面延性系数计算

延性是混凝土构件的一项重要特性 ,延性系数是构件延性的度量 ,由于沿周边均匀配筋环形截面偏心受压构件受力计算的特殊性 ,至今没有一个较精确的计算公式。本文根据沿周边均匀配筋环形截面偏心受压构件的工作特点 ,采用常用应力应变关系和基本假设 ,提出了其延性系数的计算方法。     

新产品——钢带增强聚乙烯螺旋波纹管

钢带增强聚乙烯螺旋波纹管是一种创新的埋地排水管,把钢材的高刚度、高强度和聚乙烯的柔韧、耐腐结合在一起,突出的优点是环刚度高和节约原材料.     

形式化语言在UMTS开发中的应用

由于3G协议规范的复杂性，3GPP方法论指导方针中鼓励使用标准的形式化语言来进行UMTS产品的设计、开发与测试。文中概要性地描述了UMTS的体系结构和在规范描述中用到的一些形式化语言的基本概念和特点，探讨了这些形式化语言在UMTS开发中的应用。使用形式化语言开发UMTS可以简化和改进测试程序，实现新产品与新标准的同步推出。     

环件轧制中晶粒变化的计算机模拟

金属微观结构变化影响产品机械性能。本文将金属再结晶数学模型与三维热刚塑性有限元结合起来进行模拟计算，获得了环件轧制中晶粒变化的三维分布规律，及与以往不同的轧制力和力矩变化。所用方法有普遍适用性。     

不锈钢绕带容器环板与绕带端头的焊接

本文通过焊接试验对奥氏体不锈钢绕带容器环板与绕带焊接工艺进行了研究分析,并得出了合理的焊接方法和工艺参数。     

硅梁式引线肖特基混频四管堆

介绍了硅梁式引线肖特基混频四管堆的研制。通过计算,获得各项设计参数,讨论了所采用的一些新工艺,管堆总电容C_t≤0.5pF,串联电阻R_s≤4Ω,管堆一致性和可靠性好。将管堆用于S波段双平衡混频器HSP25,性能优良。在这个研制的基础上,可以制作出其它多种形式的梁式引线器件。     

HIGHER ORDER MOMENTS OF SAMPLE AUTOCOVARIANCES AND SAMPLE AUTOCORRELATIONS FROM AN INDEPENDENT TIME SERIES

Abstract. Given length- n sampled time series, generated by an independent distributed process, in this paper we treat the problem of determining the greatest order, in n , that moments of the sample autocovariances and sample autocorrelations can attain. For the sample autocovariance moments, we achieve quite general results; but, for the autocorrelation moments, we restrict study to Gaussian white noise (normal, independent and identically distributed). Our main theorem relates to the cross-moments of the non-centred sample autocovariances, but we also establish a relation between these and the corresponding moments for the centred sample autocovariances.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

炭素阳极环式焙烧炉自动化燃烧技术研究

以中国长城铝业公司炭素厂34室环式焙烧炉为对象进行自动化燃烧控制技术的研究，通过分析工艺特性，研究开发了燃烧控制系统，计算机实时网络控制系统，而投资只是引进系统的三分之一，整体技术达到世界先进水平。