Eco-friendly and degradable red phosphorus nanoparticles for rapid microbial sterilization under visible light

Pathogens pose a serious challenge to environmental sanitation and a threat to public health.The frequent use of chemicals for sterilization in recent years has not only caused secondary damage to the environment but also increased pathogen resistance to drugs,which further threatens public health.To address this issue,the use of non-chemical antibacterial means has become a new trend for environmental disinfection.In this study,we developed red phosphorus nanoparticles(RPNPs),a safe and degradable photosensitive material with good photocatalytic and photothermal properties.The red phosphorus nanoparticles were prepared using a template method and ultrasonication.Under the irradiation of simulated sunlight for 20 min,the RPNPs exhibited an efficiency of 99.98%in killing Staphylococcus aureus due to their excellent photocatalytic and photothermal abilities.Transmission electron microscopy and ultraviolet–visible spectroscopy revealed that the RPNPs exhibited degradability within eight weeks.Both the RPNPs and their degradation products were nontoxic to fibroblast cells.Therefore,such RPNPs are expected to be used as a new type of low-cost,efficient,degradable,biocompatible,and eco-friendly photosensitive material for environmental disinfection.     

Total Site Hydrogen Integration with fresh hydrogen of multiple quality and waste hydrogen recovery in refineries

This paper proposes a novel method combining Pinch Methodology and waste hydrogen recovery, aiming to minimise fresh hydrogen consumption and waste hydrogen discharge. The method of multiple-level resource Pinch Analysis is extended to the level of Total Site Hydrogen Integration by considering fresh hydrogen sources with various quality. Waste hydrogen after Total Site Integration is further regenerated. The technical feasibility and economy of the various purification approaches are considered, demonstrated with a case study of a refinery hydrogen network in a petrochemical industrial park. The results showed that fresh hydrogen usage and waste hydrogen discharge could be reduced by 21.3% and 67.6%. The hydrogen recovery ratio is 95.2%. It has significant economic benefits and a short payback period for Total Site Hydrogen Integration with waste hydrogen purification. The proposed method facilitates the reuse of waste hydrogen before the purification process that incurs an additional environmental footprint. In line with the Circular Economy principles, hydrogen resource is retained in the system as long as possible before discharge.     

Two-agent two-machine flowshop scheduling with learning effects to minimize the total completion time

We study a two-agent scheduling problem in a two-machine permutation flowshop with learning effects. The objective is to minimize the total completion time of the jobs from one agent, given that the maximum tardiness of the jobs from the other agent cannot exceed a bound. We provide a branch-and-bound algorithm for the problem. In addition, we present several genetic algorithms to obtain near-optimal solutions. Computational results indicate that the algorithms perform well in either solving the problem or efficiently generating near-optimal solutions.     

Sparsity-inspired image reconstruction for electrical capacitance tomography

We present a new image reconstruction method for Electrical Capacitance Tomography (ECT). ECT image reconstruction is generally ill-posed because the number of measurements is small whereas the image dimensions are large. Here, we present a sparsity-inspired approach to achieve better ECT image reconstruction from the small number of measurements. Our approach for ECT image reconstruction is based on Total Variation (TV) regularization. We apply an efficient Split-Bregman Iteration (SBI) approach to solve the problem. We also propose three metrics to evaluate image reconstruction performance, i.e., a joint metric of positive reconstruction rate (PRR) and false reconstruction rate (FRR), correlation coefficient, and a shape and location metric. The results on both synthetic and real data show that the proposed TV-SBI method can better preserve the edges of images and better resolve different objects within reconstructed images, as compared to a representative state-of-the-art ECT image reconstruction algorithm, Projected Landweber Iteration with Linear Back Projection initialization (LBP-PLI).     

Nb和时效时间对热轧中锰TRIP钢中P偏聚的影响

热轧态中锰TRIP钢首先经650 ℃退火2 h,随后在550 ℃进行等温时效热处理,采用场发射扫描电镜(FE-SEM)研究该钢中P的偏聚和时效析出行为的变化情况。结果表明,中锰TRIP钢中P在晶界的偏聚是一种非平衡偏聚现象,临界时间约为50 h,与理论计算结果48 h较为吻合。在局部偏聚区域内,C与P存在共偏聚的关系,即P偏聚量高的地方,C含量也高。而合金元素Nb具有抑制P偏聚的效果,在20~70 h时效时间内,可以相对降低6.57%~19.5%的最大P偏聚量。根据电子背散射衍射(EBSD)菊池线分析,P偏聚量低于2.28at%时,P为固溶状态,高于2.28at.%时,P为析出状态。     

含磷固化剂及固化环氧树脂的合成及表征

以4,4′-二氨基二苯基甲烷(DDM)、苯甲醛和亚磷酸二乙酯为原料,合成了两种含磷固化剂PM1和PM2,用红外光谱、核磁共振氢谱对PM1和PM2的结构进行了表征。用DDM,PM1,PM2分别固化双酚A型(DGEBA)环氧树脂,得到DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂,采用示差扫描量热法、热重分析(TGA)和极限氧指数(LO I)对DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂的玻璃化转变温度(Tg)、反应活性、热稳定性和阻燃性能进行了表征。实验结果表明,PM2的反应活性比PM1低;DGEBA-DDM,DGEBA-PM1,DGEBA-PM2树脂的Tg分别为178,112,145℃;TGA结果表明,700℃时DGEBA-PM1和DGEBA-PM2树脂的成炭率分别为29%和35%,而700℃时DGEBA-DDM树脂的成炭率只有19%;DGEBA-PM1和DGEBA-PM2树脂的LO I值由DGEBA-DDM树脂的24%分别增至30%和35%,且阻燃性能大幅度提高。     

无机阻燃剂高聚合度聚磷酸铵的研制

以五氧化二磷、磷酸铵盐、尿素为原料、氨气为保护气,制备了高聚合度聚磷酸铵无机阻燃剂。考察了五氧化二磷、磷酸铵盐、尿素的用量和反应温度对聚磷酸铵平均聚合度的影响。采用端基滴定法测定了聚磷酸铵的聚合度,并用X射线衍射(XRD)法表征了聚磷酸铵的晶体结构,同时测定了聚磷酸铵的粒度和溶解度。实验结果表明,制备聚磷酸铵的最佳反应条件为:n(磷酸氢二铵)∶n(五氧化二磷)∶n(尿素)=1∶1∶0.3,反应温度280~300℃,反应时间40m in,热处理温度250~280℃,热处理时间110m in。在此条件下制备的聚磷酸铵的平均聚合度大于600,平均粒径直径小于50μm,在水中的溶解度小于0.4g;XRD表征结果表明,所合成的物质为Ⅱ型聚磷酸铵。     

RFA—300型自动分析仪检测总植物碱的改进

对连续流动法测定烟草及烟草制品中总植物碱的各影响因素进行了试验研究,并根据试验结果对仪器管路进行相应的改造。实验结果表明,烟草制品中总植物碱的连续流动法测定,改进后方法的回收收率高、重现性好。     

Phosphorus‐containing polyaryloxydiphenylsilanes with high flame retardance arising from a phosphorus–silicon synergistic effect

Polyaryloxydiphenylsilanes were prepared from phosphorus‐containing diols and diphenydichlorolsilane through solution polymerization. With a stoichiometric imbalance in feed monomers, the resulting polymers exhibited moderate melting points and good processing properties. The polymers prepared showed initial decomposition temperatures above 340 °C, excellent thermal stability, high char yields at 850 °C and very high limited oxygen index values of 56–59. The polymers' char yields and their (P + Si) contents showed linear relationships. © 2003 Society of Chemical Industry     

新型磷系膨胀阻燃剂

介绍了一种新型磷酸盐,通过试验分析了其作为膨胀型阻燃剂对聚烯烃及热固性塑料的阻燃机理与阻燃效果;红磷 酚类体系在高温聚合物中有较好阻燃效果