Mechanism of methanol decomposition on the Pd/WC(0001) surface unveiled by first-principles calculations

In this study, the decomposition of methanol into the CO and H species on the Pd/tungsten carbide (WC)(0001) surface is systematically investigated using periodic density functional theory (DFT) calculations. The possible reaction pathways and intermediates are determined. The results reveal that saturated molecules, i.e., methanol and formaldehyde, adsorb weakly on the Pd/ WC(0001) surface. Both CO and H prefer three-fold sites, with adsorption energies of −1.51 and −2.67 eV, respectively. On the other hand, CH₃O stably binds at three-fold and bridge sites, with an adsorption energy of −2.58 eV. However, most of the other intermediates tend to adsorb to the surface with the carbon and oxygen atoms in their sp³ and hydroxyl-like configurations, respectively. Hence, the C atom of CH₂OH preferentially attaches to the top sites, CHOH and CH₂O adsorb at the bridge sites, while COH and CHO occupy the three-fold sites. The DFT calculations indicate that the rupture of the initial C–H bond promotes the decomposition of CH₃OH and CH₂OH, whereas in the case of CHOH, O–H bond scission is favored over the C–H bond rupture. Thus, the most probable methanol decomposition pathway on the Pd/WC(0001) surface is CH₃OH → CH₂OH → trans-CHOH → CHO → CO. The present study demonstrates that the synergistic effect of WC (as carrier) and Pd (as catalyst) alters the CH₃OH decomposition pathway and reduces the noble metal utilization.     

Preparation of one-dimensional polymer films by modification of a hydroxymethylbenzene self-assembled monolayer on iron with alkyltriethoxysilanes for preventing iron corrosion

A self-assembled monolayer (SAM) of p-hydroxymethylbenzene HOCH₂C₆H₄ - (HOMB) moiety adsorbed on iron by the formation of a covalent bond between carbon and iron atoms was prepared by electrochemical derivatization of an iron electrode with p-hydroxymethylbenzenediazonium tetrafluoroborate HOCH₂C₆H₄N₂BF₄. The electrode covered with the HOMB SAM was modified with alkyltriethoxysilanes C_nH_2n+1Si(OC₂H₅)₃ (C_nTES, n = 8 or 18) to prepare a film of one-dimensional polymer. The protective ability of the polymer film was determined by polarization measurement of the covered electrode in an aerated 0.5 M NaCl solution. The ability was enhanced by modification of the HOMB SAM with C_nTES markedly. The iron surface coated with the one-dimensional polymer film of the HOMB SAM modified with C₈TES was characterized by contact angle measurement and FTIR reflection and X-ray photoelectron spectroscopies. The persistence in the protective ability of the polymer film against iron corrosion in 0.5 M NaCl may be associated with the strong adsorption via the covalent bond, revealed by electron-probe microanalysis.     

基于光敏自组装多层膜的液晶光控取向膜

采用layer-by-layer(LBL)的方法，将基板依次在具有光敏双键的季铵盐水溶液和聚乙烯基苯磺酸钠水溶液中浸泡，石英基板表面形成了自组装多层沉积膜。经线性偏振紫外光辐照后，LBL多层膜表现出明显的紫外吸收各向异性。将两片带有各向异性薄膜的基板做成平行液晶器件。在正交的偏光显微镜下观察，发现取得均一、稳定的取向效果。该种光控取向膜有望用作LCoS微显示的取向层。     

Optical and structural properties of MOVPE grown GaxIn1−xAs/InP strained multiple quantum well atructures

This paper presents a study of the structural and optical properties of strained GaInAs/ InP multiple quantum well (MQW) structures fabricated by LP-MOVPE. The composition of the Ga _x In_1−x As films ranged fromx = 0.17 tox = 1.0 and was determined by sputtered neutral mass spectrometry (SNMS) on thick layers. The structures of the MQW samples with well widths from 1.5 to 5 nm were investigated by high resolution x-ray diffraction (HR-XRD). Simulations of the diffraction patterns showed that transition layers of approximately 2 monolayer (ML) thickness with high lattice mismatch exist at the interfaces. Photoluminescence (PL) measurements indicate well widths of a multiple of a monolayer with local variations of one monolayer. The PL peak energies vary smoothly with the Ga concentration. These results were confirmed by optical absorption measurements.     

Vibrational Mode in Two-Dimensional Dust Monolayer with Finite Size Dust Grains

Vibrational mode in a two-dimensional dust monolayer is investigated by considering the finite size of dust grains. Each dust grain is assumed to be a negative point charge and a dipole moment due to the inhomogeneous charge distribution on its surface. The dispersion relation of the vibrational mode is derived. Both the self-excited and externally excited cases are discussed. It is shown that the mode is sensitive to the direction of the dipole moment.     

A carboxyalkanethiol monolayer modified electrode for blocking of ascorbic acid oxidation and its application to a biosensor

Upon the application of amperometric biosensor to the biological fluid, ascorbic acid interferes the amperometric determination of analytes, because the oxidative potential of ascorbic acid is lower than that of electro active substances such as H₂O₂ produced by the enzymatic reaction. In this study we propose a method to block ascorbic acid based on the electrostatic interaction with self-assembled monolayer (SAM) and its application of the surface modified electrode to biosensor. In order to form SAM on the gold electrode with carboxyl group, 7-carboxy-heptanethiol (7-CHT) was used. The 7-CHT modified electrode did not show anodic response to ascorbic acid, but oxidized phenanthroline cobalt complex [Co(phen)₃²⁺], which can be used as a mediator of biosensor. Thus, the 7CHT-modified electrode was applied to biosensor mediated with Co(phen)₃²⁺. Fructose dehydrogenase (FDH) was immobilized to the 7-CHT modified electrode. Fructose was determined selectively with the FDH/7-CHT modified electrode at the range of 0.2-2 mM.     

Acidolysis of babassu fat catalyzed by immobilized lipase

The lipase-catalyzed interesterification of oils and fats gives products that are unobtainable by chemical interesterification methods. Acidolysis of babassu fat and palmitic acid, catalyzed by immobilized lipase (Lipozyme; Novo Industri, Bagsveard, Denmark), was studied. The reactions were performed at 65°C with 5% w/w enzyme for 4 h. The molar proportions of babassu fat/palmitic acid were 1∶0.1, 1∶0.3 and 1∶0.5. At the end of the reaction period, the catalyst particles were removed by filtration, and the residual oil was extracted with organic solvent (diethyl ether). The recovered particles were then reused. The palmitic acid content of babassu fat before and after acidolysis changed from 10 to 22% at a molar proportion of 1∶0.5. The equilibrium was attained in about 4 h. The original water and enzymatic activities of Lipozyme were maintained after acidolysis. Water sorption isotherms of the immobilized enzyme were determined at 25, 35 and 45°C. From the temperature dependence of the isotherms, isosteric heats of sorption were evaluated by means of the Clausius Clapeyron equation. Monolayer moisture content was calculated by means of the B.E.T. and Guggenhein-Anderson-De Boer analyses. Paper presented at the International Meeting on Fats and Oils Technology, Universidade Estadual de Campinas, Brazil, 1991.     

细胞固定化催化生产精细化学品的研究进展Q

摘要：细胞固定化技术具有流程简单、生物相容、操作稳定等优点，可有效保证细胞活性，实现高效的细胞催化生产精细化学品。本文介绍了表面附着、凝胶包埋、聚电解质层层自组装膜等多细胞固定化方法，及其在二元醇、生物乙醇、乳酸、酯、多糖等精细化学品生产中的研究现状和进展，并分析讨论了各种方法存在的问题。同时，总结了近年来新发展的单细胞纳米涂层固定化方法的机理、趋势及应用于精细化学品生产的可能性。最后对细胞固定化催化生产精细化学品面临的技术挑战及研究方向做出展望，以期为精细化学品生产提供一定的技术支持。     

Catalytic activity and solid acidity of vanadium oxide thin layer loaded on TiO2, ZrO2, and SnO2

Vanadium oxide spread highly on TiO₂ (anatase, A) and SnO₂, and rather densely on TiO₂ (rutile, R) and ZrO₂ to make the monolayer in less than 4–5 V nm⁻². Profile of acid site of the monolayer was measured by temperature programmed desorption of ammonia, and its relation with the surface oxidation state was studied. The acid site density was high on the V₂O₅/TiO₂ (A) independent of the degree of oxidation. On the other hand, that of V₂O₅/TiO₂ (R) and V₂O₅/ZrO₂ depended on the oxidation state, and the high value of the concentration was observed on the oxidized one. The strength of acid site generated on the V₂O₅ monolayer on TiO₂ was as high as on the HZSM-5 zeolite. Turnover frequency (TOF) of propane conversion, and product selectivity were measured in propane oxidation. Among tested oxides, the V₂O₅/TiO₂ (A) showed the high TOF and selectivity to form propylene, while those loaded on TiO₂ (R) and ZrO₂ the small TOF and poor selectivity. Therefore, the reaction profile of activity and selectivity could be related with the extent of spreading and solid acidity. An idea of limit of the acid site density ca. 1.5 nm⁻² on the monolayer was elucidated.     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。