A three-dimensional surface measurement system implemented with Gaussian process based adaptive sampling

Self-adaptive surface measurements that can reduce data redundancy and improve time efficiency are in high demand in many fields of science and technology. For this purpose, a system implemented with Gaussian process (GP) adaptive sampling is developed. The non-parametric GP model is applied to reconstruct the topography and guide the subsequent sampling position, which is determined from the inference uncertainty estimation. A criterion is proposed to terminate the GP adaptive measurement automatically without any prior model or data of the topography. Experiments on typical surfaces validate the intelligence, adaptability, and high accuracy of the GP method along with the stabilization of the automatic iteration termination. Compared with traditional raster sampling, data redundancy is reduced and the time efficiency is improved without sacrificing the surface reconstruction accuracy. The proposed method can be implemented in other systems with similar measurement principles, thus benefitting surface characterizations.     

Reducing treatment zone diameter in orthokeratology and its effect on peripheral ocular refraction

PurposeTo determine whether orthokeratology (OK) induced treatment zone (TZ) diameter can be reduced by altering OK lens design, and if so the impact of modifying TZ diameter on relative peripheral refraction (RPR).Methods16 subjects (mean age 23.4 ± 1.5 years; 8 female) completed the study. Standard (Control) OK lens design (PJ, Capricornia, Australia) or a modified version (Test) where the back optic zone diameter was reduced, and back optic zone asphericity and intermediate lens curves were altered, were worn overnight only for 7-nights in a randomised double masked order, with a minimum 1-week wash out (no lens wear) between lens designs. Full correction of refractive error was targeted. Refraction; best corrected visual acuity (BCVA); RPR (Shin-Nippon NVision-k 5001) along the horizontal and vertical meridians; and corneal topography (Medmont E300) were measured before starting lens wear and in the morning after lens removal after the seventh night of lens wear for both lens designs. TZ diameter and decentration was calculated from corneal topography.ResultsAfter 7-nights of wear both lens designs created -2.00D refraction effect with no significant difference in refractive effect or change to BCVA between the designs. The Test design created a significantly smaller horizontal (4.78 ± 0.37 vs 5.70 ± 0.37 mm, p < 0.001) and vertical (5.09 ± 0.51 vs 5.92 ± 0.51 mm p < 0.001) TZ diameter. The TZ was decentered inferior temporal with no significant difference between designs. There was no significant difference between the lens designs in RPR along the horizontal and vertical meridians at any measurement period.ConclusionsOK induced TZ diameter can be reliably reduced by altering OK lens design without detrimentally effecting lens centration or refractive effect. Reducing TZ diameter did not alter RPR, though measurement artifacts could be responsible for masking an effect. Longitudinal studies are needed to assess whether smaller TZ OK lens designs increase efficacy for slowing progression of myopia.     

激光晶体Nd:YVO4的形貌及生长缺陷

本文报道了应用环境扫描电镜（ESEM）和同步辐射X射线白光形貌术对采用提拉法生长出的Nd:YVO4晶体进行的形貌及生长缺陷的分析,获得了该晶体的开裂表面的ESEM形貌像以及取自晶体肩部和中间部位的（001）面的同步辐射白光形貌像,观察到了位错、包裹物等缺陷,可为生长高质量的Nd:YVO4晶体提供重要的启示.     

Micro-RBS characterisation of the chemical composition and particulate deposition on pulsed laser deposited Si1−xGex thin films

The formation and deposition of particulates by pulsed laser deposition of Si_1−xGe_x semiconductor alloy thin films are discussed. Using Rutherford backscattering spectrometry with micrometer lateral resolution (micro-RBS) the film composition was measured with high accuracy, even in the presence of particulates with a high areal density of 20,000–30,000 particulates per mm². We show that on impact of a particulate, the part of the thin film which is already deposited probably melts and its Ge content segregates to the surface.     

GIS支持下的长江江苏河段深槽冲淤演变探讨

GIS强大的空间分析和空间数据库功能,提供了其它研究手段难以解决的河道水下地形冲淤变化分析及空间分布等问题的有力工具。本文在GIS技术的支持下,利用6个测次的长江(南京以下段)航道图数据,建立研究区域河道水下地形数据库,分析了河道冲淤变化及空间分布,分析计算结果表明研究区域1995年以前净面积减少,以冲刷为主,局部地区有淤积,但冲刷量大于淤积量,在1983年至1987年间净减少面积最大值为17.94km2.a-1;1995年以后净面积增加,以淤积为主,年净增面积达到13.43km2.a-1。同时基于GIS技术对河道形态、冲淤部位等进行实时的可视化显示,进一步对河道冲淤变化进行高效、准确的定量分析,更能有利于发现河道冲淤规律,为洪灾成因和防洪减灾对策研究提供决策支持。     

The topographic normalization of hyperspectral data: implications for the selection of spectral end members and lithologic mapping

Compact Airborne Spectrographic Imager (CASI) hyperspectral data is used to investigate the effects of topography on the selection of spectral end members, and to assess whether the topographic correction improves the discrimination of rock units for lithologic mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:50,000, is used to model the radiance variation of the scene as a function of topography, assuming a Lambertian surface. Skylight is estimated and removed from the airborne data using a dark object correction. The CASI data is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. The results show that topography has the effect of expanding end member clusters at times resulting in the overlap of clusters and that the correction process can effectively reduce the variation in detected radiance due to changes in local illumination. When topographic effects are embedded in the hyperspectral data, methods typically used for the selection of end members, such as the convex hull method, can miss end members or result in the selection of nonrepresentative pixels as end members. Thus, end members selected by some conventional methods are very likely “incomplete” or “nonrepresentative” if the topographic effect is embedded in the data. As shown in this study, the topographic correction can reveal hidden end members and achieve a better representation of end members via the statistical center of isolated clusters.     

Non-destructive evaluation of residual stresses in thin films via x-ray diffraction topography methods

Quantitative x-ray diffraction topography techniques have been used to measure the residual strain magnitude and uniformity of deposition for Mo and W sputtered films on Si(100) substrates. High sensitivity rocking curve measurements were able to determine differential strains for films as thin as 2.5 nm; while Bragg angle contour mapping had similar sensitivity and was also able to assess coating uniformity and stress distribution over areas covering a whole wafer. Measurements of strain versus film thickness over a range of 2.5 nm to 80 nm showed that a critical thickness exists for maximum residual strain. Growth beyond this range produces stress relaxation. This non-destructive type of analysis could be employed on a wide range of film-substrate combinations.     

模型桥墩局部冲刷瞬时地形数据自动获取装备研制

模型试验中冲刷地形测绘装备相对落后,致使桥墩周围局部冲刷瞬时地形数据无法实时获取,冲刷动态发展过程及机理的模型试验研究工作难以开展。研制了一种模型桥墩局部冲刷瞬时地形数据等值线自动绘制装备,并利用室内水工模型试验优化了各组成的性能指标,量化了绘制装备的设计参数,分析了监测系统在模型应用中的测绘精度及在工程原型中的适用性。模型试验研究表明,该装备结构简单,操作方便,加工制作成本较低,精度及灵敏性较高,能够快速获取动态过程中局部冲刷瞬时地形等值线,适用于局部冲刷发展影响流场特性研究中的水下地形快速测绘,也可按放大比尺制作成型后应用于涉水建筑物周围水下地形监测。     

热氧老化EPR电缆绝缘局部放电特性及劣化机理

为了探究热氧老化后乙丙橡胶电缆绝缘的局部放电特性及劣化机理,文中通过典型柱–板电极对不同老化程度的乙丙橡胶试样进行了局部放电试验,并对其放电发展特性和材料理化性质进行了分析。结果表明:放电起始电压和闪络电压均随绝缘老化程度的提高而降低;根据放电过程中放电特征量的变化规律,可将放电过程划分为4个阶段:起始阶段、发展阶段、持续阶段、预闪络阶段,且不同老化程度试样的PRPD谱图在各阶段呈现出特定形状;老化后的试样表面气化或气体解吸附、内部添加剂成分析出导致试样表面出现"沟壑区"、白色块状物和"微孔",分子结构中的羰基等含氧基团、聚乙烯和聚丙烯等自由基数量的增加是乙丙橡胶绝缘在热氧老化后更易出现局部放电的关键原因。     

An improved cutting force and surface topography prediction model in end milling

During the milling operation, the cutting forces will induce vibration on the cutting tool, the workpiece, and the fixtures, which will affect the surface integrity of the final part and consequently the product's quality. In this paper, a generic and improved model is introduced to simultaneously predict the conventional cutting forces along with 3D surface topography during side milling operation. The model incorporates the effects of tool runout, tool deflection, system dynamics, flank face wear, and the tool tilting on the surface roughness. An improved technique to calculate the instantaneous chip thickness is also presented. The model predictions on cutting forces and surface roughness and topography agreed well with experimental results.