Optical and electrical properties of ITO film on flexible fluorphlogopite substrate

Indium Tin Oxide (ITO) films were prepared, at room temperature, on a fluorphlogopite substrate using magnetron sputtering technology. At various temperatures of 500 °C, 600 °C, 700 °C, 800 °C, and 900 °C, the samples were (had) annealed for 2 h (a 2-h duration). The results showed improvement in the crystalline performance of ITO film at selected annealing temperatures, with a significant reduction in resistivity at 800 °C. The lowest resistivity is 4.08 × 10^?4 Ω-cm, which is nearly an order of magnitude lower than the unannealed sample. All samples have an average light transmittance above 85% in the visible light range (400–800 nm), and with increasing annealing temperature, the average light transmittance tends to decrease. Besides, at the sensitive wavelength of 550 nm, the light transmittance is as high as 93.74%. The sheet resistance testing of the sample was through the number of bending times, which revealed that with the increase of the number of bending, the sheet resistance increases. However, after 1200 bending times, the change rate of the sheet resistance remains below 5%. Thus, the ITO film prepared on the flexible fluorphlogopite substrate revealed excellent optical and electrical properties, good flexibility, and improved stability after high-temperature annealing, which guarantees successful application in flexible electronic devices.     

高阻值Cd1-xZnxTe晶体的生长及其性能测试

通过适当的工艺措施，采用Bridgman法生长了直径为30mm的X射线及γ射线探测器级的Cd.9Zn0．1Te晶锭．测试结果表明：该晶锭结晶质量良好，位错密度低，成分均匀，杂质含量低，红外透过率和电阻率都十分接近本征Cd.9Zn0．1Te的值．并从晶体的生长特性、缺陷和杂质的角度，分析了生长高性能晶体的条件，研究了生长Cdl-xZnxTe晶体的x值与缺陷和杂质浓度之间的关系．     

多层介质光学膜系的误差分析——膜层厚度变化的灵敏度因子

文中推导了对于给定膜系的特定膜层的厚度变化的灵敏度因子计算公式，并给出了用计算机对不同膜系的计算实例。分析了厚度灵敏度因子对膜系透射光谱的灵敏谱段、灵敏膜层等特性的影响规律，并由此给出了确定膜层厚度允差的方法。     

YAG光学功能陶瓷材料

对日本研制的ＹＡＧ光学功能陶瓷的制备工、性能作了较详细的介绍。与过去的ＹＡＧ单晶陶瓷作了对比，并对其发展及应用前景进行了分析。     

Preparation of fluoroacrylate nanocopolymer by miniemulsion polymerization used in textile finishing

Latex based on fluoroacrylate (TAN) and other comonomers was prepared via miniemulsion polymerization in the presence of stearyl trimethyl ammonium chloride (STAC) and 2, 2′‐azobis (2‐amidinopropane) dihydrochloride (ABAP) as a water soluble initiator. Light transmittance studies demonstrated that the light transmittance of prepared emulsions increases with the amount of TAN, STAC, cosolvent DPM, and hydrophobe DM. Given suitable reaction temperature and quantities of TAN, STAC, DPM, and DM, a copolymer emulsion of fluoroacylate with a particle size of 50 nm was produced. The water repellency tested on polyester fabrics displayed greater effectiveness than that of commercial products with higher fluorine content. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1466–1472, 2004     

半透明氮化硅陶瓷的放电等离子烧结制备及性能

用放电等离子烧结(spark plasma sintering,SPS)技术,以质量分数(下同)为9%氮化铝(A1N),3%氧化镁(MgO)为烧结助剂,在1850℃烧结5min,成功制备了半透明氮化硅(Si3N4)陶瓷.半透明Si3N4陶瓷在中红外波段表现出良好的透过率,最大透过率为66.4%.SPS的快速致密化过程保证了烧结体具有良好的晶体结构,有利于提高透过率.SPS快速的烧结过程和A1N和MgO的加入能够有效抑制烧结过程中Si3N4陶瓷由α相向β相的转变,是制备光学性能良好的Si3N4陶瓷的关键.报道了半透明Si3N4陶瓷的其他性能.光学性能与其他性能的结合,势必大大拓宽Si3N4陶瓷的应用领域.     

固相反应法制备YAG透明陶瓷

研究了固相反应法制备钇铝石榴石(yttrium aluminum garnet，YAG)透明陶瓷的工艺。采用高纯Y2O3和Al2O3超徽粉为原料，在1300℃煅烧2h，制备出YAG粉末。YAG相生成温度比常规温度大约低200℃。加入0．5％(质量分数)正硅酸乙醑烧结助剂后，YAG坯体在1700℃真空烧结5h，得到了高透光的YAG陶瓷，其在可见光区最大透光率为63％，在红外光区的透光率接近70％。YAG陶瓷具有均匀的微观结构，晶粒尺寸大约为10～30μm。     

染料型喷墨打印墨水色素的色度学分析

通过对四个打印机彩色三原色墨水的光谱透射率测定及色度学分析，得到每一颜色的三刺激值，色度坐标，比较了这4组三原色拼色的色域大小，彩度值，色相的主波长及补色波长。提出了三原色补色波长之间关系的一个经验公式：λcompl.M≌10/9（λcompl.Y） 10，及λcompl.M≌9/10（λcompl.C）-20，发现这4组三原色的补色波长与此公式有较好的适应性。     

Synthesis and Characterization of Hydrophobic TMES/TEOS Based Silica Aerogels

The experimental results on the effect of adding trimethylethoxysilane (TMES) as a co-precursor on the hydrophobicity and physical properties of tetraethoxysilane (TEOS) based silica aerogels, are reported. The molar ratio of TEOS, ethanol (EtOH), water (0.001 M oxalic acid catalyst) was kept constant at 1:5:7 respectively, while the molar ratio of TMES/TEOS (A) was varied from 0 to 0.6. It has been observed that as the A value increases, the gelation time increases. The hydrophobicity was tested by measuring the contact angle, and the surface chemical modification was confirmed by the FTIR spectroscopy studies. The thermal stability of the hydrophobic aerogels was studied in the temperature range from 25 to 800°C. The hydrophobic nature of the aerogel could be maintained up to a temperature of 287°C and above this temperature the aerogels become hydrophilic. The bulk density and the optical transmittance of the aerogels have been found to decrease with increase in A value. The aerogels have been characterized by Fourier transform infrared spectroscopy (FTIR), Optical transmittance, Scanning electron microscopy (SEM), Differential thermal analysis (DTA) and Thermogravimetric analysis (TGA), and Contact angle measurements.     

CVD-ZnS中与锌有关的晶体缺陷及其对光学性能的影响

采用化学气相沉积（ＣＶＤ）法制备了红外晶体ＺｎＳ块材料。用氩气作为载体，反应气体为硫化氢和锌蒸气。ＸＰＳ，ＩＲ及能谱分析表明：当沉积温度低于锌蒸发温度时，生成的ＺｎＳ中与锌有关的晶体缺陷有Ｚｎ—Ｈ功能团及存在于花瓣状形态中心的锌微粒夹杂；当沉积温度高于锌蒸发温度时，锌微粒夹杂消失，且随沉积温度的升高Ｚｎ—Ｈ含量减少，Ｚｎ—Ｈ对红外光在６．２μｍ波长处的吸收峰减弱，使生成的ＺｎＳ具有高的红外透过率。