动态结冰孔隙结构三维建模方法

动态结冰内部呈现多孔结构特点，这一微观孔隙结构是影响其宏观物性的关键因素，然而传统方法难以对三维孔隙结构进行定量表征。为了客观刻画结冰微观结构特征，提出了基于结冰二维图像定量信息的三维微观结构建模方法。首先，研究并确定了真实结冰尺寸与建模区域之间的比例关系，分析比例尺对分辨率和建模的影响；其次，结合二维孔隙率和孔径分布函数，提出了三维孔隙数量及其孔径的推导方法，并给定了孔隙位置随机生成方法；基于此，最终建立了以0-1矩阵形式表征结冰三维微观孔隙结构的方法。实验表明，所生成三维结冰模型的二维孔隙定量信息与实验结果吻合度较高，建模方法准确可行，为动态结冰三维刻画、微观特征参数提取和相关微观仿真模拟提供了新途径。     

Design of an aeronautic pitot probe with a redundant heating system incorporating phase change materials

The aim of this work is the design of a pitot probe (PP) prototype in order to retard the cool down of the tip, in case of a heating element failure. The viability of operation in flight conditions is evaluated. The design consists of a redundant heating system incorporating phase change materials (PCM). Combining experimental observations of ice formation with the implementation of the conjugate heat transfer (CHT) model, with the addition of the heat release due to the phase change of the PCM, the numerical evaluation is developed. The modelling assumptions and numerical implementation of the phase change process are presented. Then, the selection an appropriate PCM is based on the low flammability and volume dilation and the quantitative effects of the material properties on the heat transfer. A commercial PCM solution based on salt hydrates was chosen as the most adequate for the design. The parametric design of the prototype, based on the design of experiment method and fractional factorial testing, is established. A multiple linear regression model was obtained in order to maximize the cooling retardation. The numerical simulations demonstrate that the prototype PP tip temperature remains 194 s longer above 0 °C than that of the conventional model analyzed.     

结冰风洞校准标准研究

本文按结冰风洞制冷方式、试验对象、用途性质和试验段尺寸归纳总结了结冰风洞的类型,指出校准标准主要针对的结冰风洞类型;阐述结冰风洞空气动力流场校准可以依据的3个国内外标准;介绍SAE结冰风洞校准标准中云雾场校准的主要内容;分析研究相关标准的特点和存在的不足;提出未来我国制定结冰风洞校准标准的建议。     

Cold start optimization of the proton-exchange membrane fuel cell by penetrating holes in the cathode micro-diffusion layer

Enhancing the cold start ability of proton-exchange membrane fuel cells (PEMFCs) can widely apply fuel cells in a cold environment. In this study, PEMFC cold start performance was significantly affected by penetrating holes in a cathode micro-diffusion layer (MDL). The testing MDLs were mechanically processed with 0.2-mm-diameter and 0.5-mm-diameter penetrating holes, respectively, and the normal MDL as reference. Fundamental water permeance and PEMFC performance tests at normal temperature were conducted beforehand for all MDLs. The cold start of the fuel cell was experimentally studied by monitoring PEMFC voltage and high-frequency impedance. Results show that the 0.5-mm-diameter penetrating holes improve the water permeance at least three orders of magnitude than the normal MDL. The fuel cell using the MDL with the 0.2-mm-diameter penetrating holes performs best in regular operation at 70 °C and in cold starts from ?7 °C.     

后张梁灌浆材料及工艺对结冰压的影响

研究了水灰比mw/mc、引气剂、养护时间及养护温度对灌浆材料结冰压的影响.结果表明:水灰比越大,灌浆材料的结冰压越大;养护时间少于24 h的非引气灌浆材料在各个水灰比下均存在较大的结冰压;非引气灌浆材料及水灰比大于0.32的引气灌浆材料在15℃下养护24 h或5℃下养护40 h,其结冰压有较大幅度的降低;掺加引气剂可显著降低灌浆材料的结冰压,当水灰比小于0.36时,掺引气剂的作用尤其明显.     

带并联间隙地线复合绝缘子直流覆冰闪络特性

架空地线融冰已成为一个亟需解决的问题,目前通常对架空地线进行改造加装带间隙的绝缘子并采用直流融冰,其融冰电压受到地线绝缘子放电电压的制约,进而也影响了地线融冰的长度。对耐张型和悬垂型两种地线绝缘子在严重覆冰条件下并联间隙大小与地线绝缘子直流冰闪电压间的关系进行了试验研究。结果表明:两种地线绝缘子表面清洁、未覆冰情况下,其直流50%放电电压U50%与并联间距d呈幂指数关系,随着并联间距d增大,U50%增大,且增速逐渐减小;覆冰条件下,耐张型并联间隙地线复合绝缘子并联间距的选择与覆冰厚度di相关,可以选为(10+2di)mm;悬垂型地线绝缘子在严重覆冰地区建议选择80~100mm的并联间距。在保证融冰期间地线与杆塔保持良好绝缘的条件下,应选择较小间距来提高其防雷性能。     

覆冰在线监测预警系统研究现状分析

自2008年冰灾以后,覆冰在线监测技术受到普遍重视,国家电网管辖的华中、湖南、浙江、福建等地电网,南方电网管辖的广东、广西、云南、贵州省网和超高压电网先后研制出覆冰监测系统并投入使用。首先总结了目前输电线路覆冰在线监测系统和监测模型的研究现状,并分别展开分析论述,同时阐述了南方电网覆冰监测系统运行流程,并对在线监测系统运行期间所获得的大量运行数据进行大数据处理的发展趋势提出了看法和意见。最后,对覆冰在线监测预警系统做出了总结和展望。     

Numerical simulation of rime ice accretion process on an airfoil

To simulate the ice accretion on an airfoil, a boundary moving technique is proposed to deal with the distortion of the airfoil surface due to ice accretion on the leading edge. Incorporating the two‐phase model of air‐supercooled droplets in the Eulerian coordinate system, this technique is applied to simulate the process of the rime ice accretion (the droplets freeze at the instant impinging on the airfoil) on the NACA 0012 airfoil, and the ice profile after ice accretion is achieved successfully. A brief comparison between the results of this paper and the experiment data indicates that the current method is applicable and effective. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(4): 226–234, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20064     

Meteorological wind energy potential in the Alps using ERA40 and wind measurement sites in the Tyrolean Alps

The peculiarities of meteorological wind potential in alpine settings compared to flatland and offshore sites are studied. Four data sources are used: Global reanalysis ERA40 from ECMWF, long‐term stations in the Tyrolean Alps, spatially dense measurements near the best site and Doppler sodar wind profiles. Due to the decrease of density with height, alpine sites suffer from a nearly linear decrease of harvestable power with altitude, which is more than offset by the increase of wind speed at altitudes above 1.5 km MSL. ERA40 data show higher potential on the northern than on the southern side of the Alps. The best locations are not isolated peaks but ridges within wide orographic channels. The best potential sites in the Tyrolean part of the Alps have median wind speeds of up to 7.1 m s^?1 and extractable potentials between 2900 and 1600 kWh per year and per square meter of rotor area. The profile of horizontal wind speed at ridge sites is often not logarithmic but approximately constant within the height of a wind turbine due to a (nearly) complete absence of upwind fetch. Also, the turbulence intensity is independent of height. Icing can cause considerable downtimes. Copyright © 2010 John Wiley & Sons, Ltd.     

基于有限元方法的覆冰输电线路高频高压除冰法分析

输电线路在冬季风雪的影响下覆冰是一个一直存在的问题,它可能引发大范围的停电事故以及耗费数目庞大的修复或重建费用.通过施以大约33 kV,100 kHz的激励引发的覆冰自身的介质损耗,能够对覆冰输电线路进行融冰.如果仪考虑覆冰介质损耗,则由于发热不均匀将引起驻波效应,但如果同时考虑覆冰介质损耗与电流通过导线时集肤效应造成的电阻损耗,就能够通过调节两者的综合效应达到均匀发热的目的.